Hybrid nanocomposite layers Ni/Al2O3/C graphite produced by electrocrystallization method

• Autorzy: Bartoszek W. , Trzaska M.

Identyfikatory

DOI

10.24425/amm.2019.126233

• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of studies of hybrid composite layers Ni/Al₂O₃/C_graphite produced by the electrodeposition method. Three variants of hybrid composite layers were prepared in electrolyte solutions with the same amounts of each dispersion phases which were equal to 0.25; 0.50 and 0.75 g/dm³. The structure of Ni/Al₂O₃/C_graphite layers as well as the Al₂O₃ and graphite powders, which were used as dispersion phases was investigated. The results of morphology and surface topography of produced layers are presented. The modulus of elasticity and microhardness of the material of produced layers were determined by DSI method. Tribological and corrosion resistance tests of produced layers were carried out. Realized studies have shown that the material of the produced layers is characterized by a nanocrystalline structure. Incorporation of dispersion phases into the nickiel matrix increases the degree of surface development of layers. Ni/Al₂O₃/C_graphite layers are characterized by high hardness and abrasion resistance by friction, furthermore, they provide good corrosion protection for the substrate material.

Słowa kluczowe

EN

hybrid composite layers; electrocrystallization; nickel layers; wear resistance; corrosion resistance

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 1
• Strony: 167--173
• Opis fizyczny: Bibliogr. 29 poz., fot., rys., tab.

Twórcy

autor

Bartoszek W.

• Department of Electroplating and Environmental Protection, Institute of Precision Mechanics, 3 Duchnicka Str., 01-796 Warszawa, Poland

autor

Trzaska M.

• Department of Electroplating and Environmental Protection, Institute of Precision Mechanics, 3 Duchnicka Str., 01-796 Warszawa, Poland

Bibliografia

• [1] S. Arshali, M. Manoj, D. Saurabh, K. Sasi, Mater. Today-Proc. 2, 3042-3048 (2015).
• [2] S. Özkana, G. Hapçıa, G. Orhana, K. Kazmanlıb, Surf. Coat. Tech. 232, 734-741 (2013).
• [3] T. Borkar, S. P. Harimkar, Surf. Coat. Tech. 205, 4124-4134 (2011).
• [4] M. Surender, B. Basu, R. Balasubramaniam, Tribol. Int. 37, 743-749 (2004).
• [5] P. Baghery, M. Farzam, A. B . Mousavi, M. Hosseini, Surf. Coat. Tech. 204 (23), 3804-3810 (2010).
• [6] G. Cieślak, M. Trzaska, Pol. J. Chem. Technol. 20 (1), 29-34 (2018).
• [7] W. Bartoszek, G. Cieślak, K. Skroban, A. Mazurek, M. Trzaska, Ochrona przed Korozją 61 (2), 36-39 (2018).
• [8] N. P. Wasekar, P. Haridoss, S. K. Seshadri, G. Sundararajan, Surf. Coat. Tech. 291, 130-140 (2016).
• [9] A. C. Ferrari, J. C. Meyer, V. Scardaci, C. Casiraghi, M. Lazzeri, F. Mauri, S. Piscanec, D. Jiang, K. S. Novoselov, S. Roth, A. K. Geim, Phys. Rev. Lett. 97, 187401 (2006).
• [10] I. Childres, L. A. Jauregui, W. Park, H. Cao, Y. P. Chen, Raman spectroscopy of graphene and related materials, in: J.I. Jang (Ed.), New Developments in Photon and Materials Research, Nova Science Publishers, 2013
• [11] S. Reich, C. Thomsen, Phil. Trans. R. Soc. Lond. A 362, 2271-2288 (2004).
• [12] https://www.thermofisher.com/content/dam/tfs/ATG/CAD/CAD%20Documents/Application%20&%20Technical%20Notes/Molecular%20Spectroscopy/Raman/Raman%20Instruments/AN52252_E%201111%20LayerThkns_H_1.pdf, accessed: 20.07.2018
• [13] https://assets.thermofisher.com/TFS-Assets/CAD/Application-Notes/D19504~.pdf, accessed: 20.07.2018
• [14] M. A. Karimi, F. Banifatemeh, M. Ranjbar, J. Mater. Sci.-Mater. El. 28, 1844-1851 (2017).
• [15] M. R. Vaezi, S. K. Sadrnezhaad, L. Nikzad, Colloid Surface A. 315, 176-182 (2007).
• [16] S. Dehgahi, R. Amini, M. Alizadeh, Surf. Coat. Tech. 304, 502-511 (2016).
• [17] Q. Fenga, T. Lia, H. Tenga, X. Zhanga, Y. Zhanga, C. Liub, J. Jina, Surf. Coat. Tech. 202 (17), 4137-4144 (2008).
• [18] S. Dehgahi, R. Amini, M. Alizadeh, J. Alloy Compd. 692, 622-628 (2017).
• [19] A. Mazurek, G. Cieślak, M. Trzaska, Prace Szkoły Inżynierii Materiałowej XLIV, Akapit, Kraków (2016).
• [20] F. Hou, W. Wang, H. Guo, Appl. Surf. Sci. 252 (10), 3812-3817 (2006).
• [21] Y. Zhou, H. Zhang, B. Qian, Appl. Surf. Sci. 253 (20), 8335-8339 (2007).
• [22] E. Beltowska-Lehman, A. Góral, P. Indyka, Arch. Metall. Mater. 56 (4), 919-931 (2011).
• [23] H. Gül, F. Kılıc, S. Aslan, A. Alp, H. Akbulut, Wear 267, 976-990 (2009).
• [24] L. Du, B. Xu, S. Dong, H. Yang, Y. Wu, Surf. Coat. Tech. 192, 311-316 (2005).
• [25] R. K. Saha, T. I. Khan, Surf. Coat. Tech. 205, 890-895 (2010).
• [26] H. Zhao, L. Liu, W. Hu, B. Shen, Mater. Design. 28 (4), 1374-1378 (2007).
• [27] M. Trzaska, M. Gostomska, Kompozyty 9, 1, 84-88 (2009).
• [28] W. Sun, P. Zhang, K. Zhao, M. Tian, Y. Wang, Wear. 342-343, 172-180 (2015).
• [29] L. Du, B. Xu, S. Dong, H. Yang, W. Tu, Wear 257, 1058-1063 (2004).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).