Unsteady flow patterns between two egg-carton corrugated plates

• Autorzy: Girón-Palomares Benjamin , Hernández-Guerrero Abel , Romero-Méndez Ricardo , He Qiang

Identyfikatory

DOI

10.24423/EngTrans.1100.20210510

• Języki publikacji: EN

Abstrakty

EN

Unsteady analyses of the flow between two egg-carton corrugated plates were performed. Geometry effects on the flow were as follows: “closed recirculations” shrank downstream the channel and became “open recirculations”. For the 180° egg-carton plates, recirculations were z-symmetric to the channel center. Reynolds number increments favored recirculation growth and flow detachment. Transient development effects were as follows: the steady state was reached faster in waves closer to the channel entrance. As time advanced, spatial flow development advanced toward the channel outlet , and y-concave geometries inhibited fluid detachment and steady state achievement. Consequences of the geometry on theransient development of the flow were as follows: the recirculations appeared at larger times, they were smaller, and became “open recirculations” closer to the channel inlet for the 0° model, and the 0° model flow reached a steady state faster. Finally, no clear evidence of unsteady features called “rolling vortices” was observed. Such unsteady features might be a consequence of small unavoidable experimental uncertainties creating a pulsating flow.

Słowa kluczowe

EN

egg-carton corrugated plates; unsteady flow pattern; 3D chaotic flow; numerical analysis; recirculation; rolling vortices; pulsating flow

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Engineering Transactions
• Rocznik: 2021
• Tom: Vol. 69, iss. 2
• Strony: 167--193
• Opis fizyczny: Bibliogr. 22 poz., rys., wykr.

Twórcy

autor

Girón-Palomares Benjamin

• Anyang Institute of Technology China

autor

Hernández-Guerrero Abel

• University of Guanajuato Mexico

autor

Romero-Méndez Ricardo

• Autonomous University of San Luis Potosi Mexico

autor

He Qiang

• Anyang Institute of Technology China

Bibliografia

• 1. Ammar H., Ould El Moctar A., Garnier B., Peerhossaini H., Flow pulsation and geometry effects on mixing of two miscible fluids in microchannels, ASME Journal of Fluids Engineering, 136(12): 121101, 9 pages, 2014, doi: 10.1115/1.4027550
• 2. Ünal E., Ahn H., Sorguven E., Experimental investigation on flows in a corrugated channel, ASME Journal of Fluids Engineering, 138(7): 070908, 8 pages, 2016, doi: 10.1115/1.4032754
• 3. Karami M., Shirani E., Jarrahi M., Peerhossaini H., Mixing by time-dependent orbits in spatiotemporal chaotic advection, ASME Journal of Fluids Engineering, 137(1): 011201, 13 pages, 2015, doi: 10.1115/1.4027588
• 4. Takabi B., Salehi S., Augmentation of the heat transfer performance of a sinusoidal corrugated enclosure by employing hybrid nanofluid, Advances in Mechanical Engineering, 6: 1–16, 2014, doi: 10.1155/2014/147059
• 5. Hemida H.N., Sabry M.N., Abdel-Rahim A., Mansour H., Theoretical analysis of heat transfer in laminar pulsating flow, International Journal of Heat and Mass Transfer, 45(8): 1767–1780, 2002, doi: 10.1016/S0017-9310(01)00274-5.
• 6. Khanafer K., Al-Azmi B., Al-Shammari A., Pop I., Mixed convection analysis of laminar pulsating flow and heat transfer over a backward-facing step, International Journal of Heat and Mass Transfer, 51(25–26): 5785–5793, 2008, doi: 10.1016/j.ijheatmasstransfer.2008.04.060.
• 7. Jafari M., Farhadi M., Sedighi K., Heat transfer enhancement in a corrugated channel using oscillating flow and nanoparticles: an Lbm approach, Numerical Heat Transfer, Part A: Applications, 65(6): 601–626, 2014, doi: 10.1080/10407782.2013.836023.
• 8. Oviedo-Tolentino F., Romero-Méndez R., Hernández-Guerrero A., Girón-Palomares B., Use of diverging or converging arrangement of plates for the control of chaotic mixing in symmetric sinusoidal plate channels, Experimental Thermal and Fluid Science, 33(2): 208–214, 2009, doi: 10.1016/j.expthermflusci.2008.08.002.
• 9. Oviedo-Tolentino F., Romero-Méndez R., Hernández-Guerrero A., Girón-Palomares B., Experimental study of fluid flow in the entrance of a sinusoidal channel, International Journal of Heat and Fluid Flow, 29(5): 1233–1239, 2008, doi: 10.1016/j.ijheatfluidflow.2008.03.017.
• 10. Ramgadia A.G., Saha A.K., Characteristics of fully developed flow and heat transfer in channels with varying wall geometry, Journal of Heat Transfer, 136(2): 021703, 15 pages, 2014, doi: 10.1115/1.4024552.
• 11. Mahmud S., Sadrul Islam A., Feroz C., Flow and heat transfer characteristics inside a wavy tube, Heat and Mass Transfer, 39(5): 387–393, 2003, doi: 10.1007/s00231-002-0369-9.
• 12. Abroshan H., Numerical simulation of turbulent flow and heat transfer though sinusoidal ducts, Heat and Mass Transfer, 54(7): 2045–2059, 2018, doi: 10.1007/s00231-018-2277-7.
• 13. Girón-Palomares B., Hernández-Guerrero A., Romero-Méndez R., Oviedo-Tolentino F., An experimental analysis of the flow pattern in heat exchangers with an egg carton configuration (parallel, convergent and divergent cases), International Journal of Heat and Fluid Flow, 30(1): 158–171, 2009, doi: 10.1016/j.ijheatfluidflow.2008.09.005.
• 14. Sawyers D. R., Sen M., Chang H.-C., Heat transfer enhancement in three-dimensional corrugated channel flow, International Journal of Heat and Mass Transfer, 41(22): 3559–3573, 1998, doi: 10.1016/S0017-9310(98)00029-5.
• 15. Rush T.A., Newell T.A., Jacobi A.M., An experimental study of flow and heat transfer in sinusoidal wavy passages, International Journal of Heat and Mass Transfer, 42(9): 1541–1553, 1999, doi: 10.1016/S0017-9310(98)00264-6.
• 16. Giron-Palomares B., Hernandez-Guerrero A., Romero-Mendez R., He Q., A study of the flow patterns between two corrugated plates with an egg-carton configuration, ASME Journal of Fluids Engineering, 141(2): 021104, 13 pages, 2019, doi: 10.1115/1.4040594.
• 17. Issa R.I., Ahmadi-Befrui B., Beshay K.R., Gosman A.D., Solution of the implicitly discretised reacting flow equations by operator-splitting, Journal of Computational Physics, 93(2): 388–410, 1991, doi: 10.1016/0021-9991(91)90191-M
• 18. Ferziger J.H., Peric M., Computational Methods for Fluid Dynamics, Springer Berlin Heidelberg, New York, 2002.
• 19. Andersson B., Andersson R., Håkansson L., Mortensen M., Sudiyo R., Van Wachem B., Computational Fluid Dynamics for Engineers, Cambridge University Press, Cambridge, 2011.
• 20. Chen Z.J., Przekwas A.J., A coupled pressure-based computational method for incompressible/compressible flows, Journal of Computational Physics, 229(24): 9150–9165, 2010, doi: 10.1016/j.jcp.2010.08.029.
• 21. Kaya F., Karagoz I., Performance analysis of numerical schemes in highly swirling turbulent flows in cyclones, Current Science, 94(10): 1273–1278, 2008.
• 22. Kundu P.K., Cohen I.M., Fluid Mechanics, Academic Press, Burlington, MA, 2008.