Unbridgeable gap between evolution of blueprint codes and communication – paradigm changing in production

• Autorzy: Gyori M. , Ficzere P. , Lovas L.
• Języki publikacji: EN

Abstrakty

EN

The traditional 2D drawing (hand drawing) in engineering has a commonly known communication code. These communication codes (type of line, width of line or other marks) makes the engineering communication easier, faster and safer. In the last couple of decades new computer aided design and manufacturing methods have been developed. The communication has been changed. This article aims to investigate the gap between software development and rules of communication. Although software support has developed the communication codes and basics have not been significantly changed. 2D drawing code is not yet fully included in modern 3D CAD software. Automatic 2D drawing generation from 3D computer models results problems, for example in sections, cuts and break-outs. This paper shows the most common problems and makes recommendation through harmonisation of the communication codes.

Słowa kluczowe

EN

blueprints; design; communication; engineering

PL

rysunek 2D; druk 3D; grafika inżynierska; inżynierska dokumentacja rysunkowa

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2016
• Tom: Vol. 12, No. 3
• Strony: 22--29
• Opis fizyczny: Bibliogr. 12 poz. rys., tab.

Twórcy

autor

Gyori M.

• Department of Vehicle Parts and Structures Analysis; Budapest University of Technology and Economics; H-1111 Budapest, Sztoczek u. 2

autor

Ficzere P.

• Department of Vehicle Parts and Structures Analysis; Budapest University of Technology and Economics; H-1111 Budapest, Sztoczek u. 2

autor

Lovas L.

• Department of Vehicle Parts and Structures Analysis; Budapest University of Technology and Economics; H-1111 Budapest, Sztoczek u. 2

Bibliografia

• 1. Company P., Contero M., Varley P. Aleixos N., Naya F. Computer-aided sketching as tool to promote innovation in the new product development process. Computers in Industry, vol. 60, pp. 592-603, 2009.
• 2. Ficzere, P., & Borbás, L. New Application of 3D Printing Method for Photostress Investigation. Materials Today: Proceedings, 3(4), 969-972, 2016.
• 3. Ivanco, V., Kmet, S., & Fedorko, G. Finite element simulation of creep of spiral strands. Engineering Structures, 117, 220-2382, 016.
• 4. Lovas L. Technical Drawing I. [in Hungarian: Műszakiábrázolás I.] Lecture notes for BSc students, 2010, http://www.tankonyvtar.hu/hu/tartalom/ tamop412A/0018_Muszaki_abrazolas_1/adatok.html
• 5. Molnar, V., Fedorko, G., Stehlikova, B., Michalik, P., & Kopas,M. Influence of tension and release in piped conveyor belt on change of normal contact forces in hexagonal idler housing for pipe conveyor loaded with material. Measurement, 84, 21-31, 2016.
• 6. Stasiak-Betlejewska, R., & Potkány, M. Construction Costs Analysis and its Importance to the Economy. Procedia Economics and Finance, 34, 35-42, 2015.
• 7. Ulewicz R., Jelonek D., Mazur M. Implementation of logic flow in planning and production control. Management and production engineering review. Vol. 7, issue 1, pp. 89-94, 2016.
• 8. Krynke M. The dynamic state monitoring of bearings system. Production Engineering Archives. Vol. 6 (1). pp. 35-38, 2015.
• 9. Ulewicz R. Ocena efektywności funkcjonowania Systemu Zapewnienia Jakości. Production Engineering Archives. Vol. 1(1) pp. 35-38, 2013.
• 10. Sygut P., Klimecka-Tatar D., Borkowski S. Theoretical Analysis of the Influence of Longitudinal Stress Changes on Band Dimensions During Continuous Rolling Process, Archives of Metallurgy and Materials, Vol. 61. Iss. 1, pp .183-188, 2016.
• 11. Ingaldi M., Dziuba Sz. T. Modernity Evaluation of the Machines Used During Production Process of Metal Products, METAL 2015. 24th International Conference on Metallurgy and Materials, Brno, Czech Republic, 2015.
• 12.Nowakowska-Grunt J., Mazur M. Safety Management in Logistic Processes of Metallurgical Industry, METAL 2015. 24th International Conference on Metallurgy and Materials, Brno, Czech Republic, 2015.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.