Gas Generation Properties of Materials Used in the Sand Mould Technology – Modified Research Method

• Autorzy: Zych J. , Mocek J. , Snopkiewicz T.
• Języki publikacji: EN

Abstrakty

EN

The paper presents a new methodology for research on gas generation property of materials used for sand forms and cores, models made of foamed polystyrene, protective layers, etc. In the form of an example, full analysis has been presented of gas generation property of a selected furan resin bonded sand, stating the course and kinetics of gas generation, their intensity in the time function, and in the heating temperature function. The description is of quantitative nature. The existence of peaks in gas generation intensity was observed at several temperature values. The results are well-correlated with the inclination to form surface defects of casts made in furnace resin bonded sands. This is the first study on gas generation kinetics in the mass heating temperature function.

Słowa kluczowe

EN

moulding mass; materials used; research methodology; generation kinetics

PL

masa formierska; materiały; metodologia badań; kinetyka

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2014
• Tom: Vol. 14, iss. 3 spec.
• Strony: 105--109
• Opis fizyczny: Bibliogr. 10 poz., il., rys., wykr.

Twórcy

autor

Zych J.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 Str., 30-059 Kraków, Poland

autor

Mocek J.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 Str., 30-059 Kraków, Poland

autor

Snopkiewicz T.

• AGH - University of Science and Technology, Faculty of Foundry Engineering, Reymonta 23 Str., 30-059 Kraków, Poland

Bibliografia

• [1] Lewandowski, J.L. (1997). Materials for molds. Kraków. (in Polish).
• [2] Lewandowski, J.L., Solarski, W. & Pawłowski, Z. (1993). Classification of molding and core in terms of the ability to create gas. Przegląd Odlewnictwa. 5. (in Polish).
• [3] Urbanik, E. (1964). Unpublished doctoral dissertation AGH, Wydział Odlewnictwa Kraków. (in Polish).
• [4] Holtzer, M., Dańko, J., Lewandowski, J.L., and others, Station for research of the volume and harmfulness of gases compounds from the materials used in foundry and metallurgical processes. AGH. Polska.; PL 398709 A1.Zgłosz. 2012-04-02; Biuletyn Urzędu Patentowego ; ISSN: 0137-8015 ;2013 nr 21, s. 26.
• [5] Holtzer, M., Dańko, R., Dańko, J., Kubecki, M., Żymankowska-Kumon, S., Bobrowski, A., Śpiewok, W. (2013). Severity rating of binding materials used for molding and core of the new generation. AGH Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Kraków: Wydawnictwo Naukowe Akapit. (in Polish).
• [6] Bobrowski, A., Holtzer, M., Dańko, R. & Żymankowska – Kumon, S. (2013). Analysis of gases emitted during a thermal decomposition of the selected phenolic binders. Metalurgia International. 18(spec. 7), 259-261. ISSN 1582-2214.
• [7] Holtzer M., and others. (2012). Emission tests dangerous compounds with masses of bentonite and lustrous carbon carriers in contact with liquid metal. Przegląd Odlewnictwa. 62(3-4), 124-132. (in Polish).
• [8] Mocek, J., Zych, J., Krubnik Ł. (2014). Selected problems casting of Al - Si technology complete form, Kraków – Starachowice: XVII International Scientific - Technical Conference of Non-Ferrous Foundry. (in Polish).
• [9] Żółkiewicz Z.: The kinetics of thermal decomposition, and impact polystyrene model resulting gases on the content of hydrogen, nitrogen and oxygen in gray cast iron, in a "full mold process". Unpublished doctoral dissertation, AGH.
• [10] Pacyniak, T. (2013). Full mold method. Selected aspects. Łódź: Monografie Politechniki Łódzkiej. (in Polish).