Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The temporomandibular (TM) joint is one of the most active joints in the human body, and any defect in this joint has a significant impact on the quality of life. The objective of this study was to analyze changes in the force ratio after TM joint replacement on contralateral TM joint loading. Implantation of an artificial TM joint often requires removal of 3 of the 4 masticatory muscles (activators). In order to perform true loading of the TM joint, loading during mastication was investigated. Input kinematic variables and mastication force were experimentally examined. The inverse dynamics approach and static optimization technique were used for solution of the redundant mechanism. Muscle forces, and reactions in the TM joint were calculated. We modified the model for several different tasks. The m. temporalis and m. masseter were removed individually and together and the forces of mastication on the TM joint were calculated for each variation. To evaluate the results, a parametric numerical FE analysis was created to compare the magnitude of the TM joint loading during the bite process for four different muscle resections. The results show an influence relative to the extent of muscle resection on contralateral TM joint loading in a total TM joint replacement. The biggest increase in the loading magnitude on the contralateral TM joint is most evident after m. masseter and m. temporalis resection. The results from all simulations support our hypothesis that the greater the extent of muscle resection the greater the magnitude of contralateral TM joint overloading.
Czasopismo
Rocznik
Tom
Strony
131--136
Opis fizyczny
Bibliogr. 19 poz., wykr.
Twórcy
autor
- Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Mechanics, Biomechanics and Mechatronics, Prague, Czech Republic
autor
- Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Mechanics, Biomechanics and Mechatronics, Prague, Czech Republic
- College of Polytechnics Jihlava, Jihlava, Czech Republic
autor
- College of Polytechnics Jihlava, Jihlava, Czech Republic
Bibliografia
- [1] VAN EIJDEN T., KORFAGE J., BRUGMAN P., Architecture of the human jaw-closing and jaw-opening muscles, Anat. Rec., 1997, Vol. 248, 464–474.
- [2] GOLDMANN T., HIMMLOVA L., A novel methodology for in vivo monitoring of chewing forces acting on a single lower molar during bolus processing, Bull. Appl. Mech., 2009, Vol. 5, 66–70.
- [3] HORAK Z., KUBOVY P., STUPKA M., HORAKOVA J., Biomechanical factors influencing the beginning and development of osteoarthritis in the hip joint, Wien Med. Wochenschr., 2011, Vol. 161, 1–7.
- [4] JIRMAN R., HORAK Z., BOUDA T., MAZANEK J., REZNICEK J., Influence of the method of TM joint total replacement implantation on the loading of the joint on the opposite side, Comp. Meth. Biomech. Biomed. Eng., 2011, Vol. 14, 673–681.
- [5] KOOLSTRA J., VAN EIJDEN T., WEIJS W., NAEIJE M., A threedimensional mathematical model of the human masticatory system predicting maximum possible bite forces, J. Biomech., 1988, Vol. 21, 563–576.
- [6] KOOLSTRA J., VAN EIJEN T., Application and validation of a three-dimensional mathematical model of the human masticatory system in vivo, J. Biomech., 1992, Vol. 25, 175–187.
- [7] KOOLSTRA J., VAN EIJDEN T., Biomechanical analysis of jawclosing movements, J. Dent. Res., 1995, Vol. 74, 1564–1570.
- [8] KOOLSTRA J., VAN EIJEN T., Combined fnite-element and rigidbody analysis of human jaw joint dynamics, J. Biomech., 2005, Vol. 38, 2431–2439.
- [9] KRZEMIEN J., BARON S., Axiographic and clinical assessment of temporomandibular joint function in patients with partial edentulism, Acta Bioeng. Biomech., 2013, Vol. 15, 19–26.
- [10] LLOYD D., BESIER T., An EMG-driven musculoskeletal model to estimate muscle forces and knee joint moments in vivo, J. Biomech., 2003, Vol. 36, 765–776.
- [11] MAY B., SAHA S., SALZMAN M., A three-dimensional mathematical model of temporomandibular joint loading, Clin. Biomech., 2001, Vol. 16, 489–495.
- [12] MIDDLETON J., JONES M., WILSON A., Three-dimensional analysis of orthodontic tooth movement, J. Biomed. Eng., 1990, Vol. 12, 19–332.
- [13] TANAKA E., IWABUCHI Y., REGO E., KOLOSTRA J., YAMATO E., HASEGAWA T., KAWAZOE A., KAWAI N., TANNE K., Dynamic shear behavior of mandibular condylar cartilage is dependent on testing direction, J. Biomech., 2008, Vol. 41, 1119–1123.
- [14] THROCKMORTON G., Quantitative calculations of temporomandibular joint reaction forces II. The importance of the direction of the jaw muscle forces, J. Biomech., 1985, Vol. 18, 453–461.
- [15] THROCKMORTON G., THROCKMORTON L., Quantitative calculations of temporomandibular joint reaction forces I. The importance of the magnitude of the jaw muscle forces, J. Biomech., 1985, Vol. 18, 445–452.
- [16] VILIMEK M., Musculotendon forces derived by different muscle models, Acta Bioeng. Biomech., 2007, Vol. 9, 41–47.
- [17] VILIMEK M., An artificial neural network approach and sensitivity analysis in predicting skeletal muscle forces, Acta Bioeng. Biomech., 2014, Vol. 16, 119–127.
- [18] WALCZYNSKA-DRAGON K., BARON S., The biomechanical and functional relationship between temporomandibular dysfunction and cervical spine pain, Acta Bioeng. Biomech., 2011, Vol. 13, 93–98.
- [19] ZAJAC F., Muscle and tendon: Properties, models, scaling, and application to biomechanics and motor control, Crit. Rev. Biomed. Eng., 1989, Vol. 17, 359–411.
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-4f836901-dda7-4471-a168-eac31def7cda