Microstructure and Selected Mechanical Properties of Cr₂₅Zr₂₅Co₂₀Mo₁₅Si₁₀Y₅ and Cr₂₅Co₂₅Zr₂₀Mo₁₅Si₁₀Y₅ Multicomponent Alloys

• Autorzy: Glowka Karsten , Zubko Maciej , Piotrowski Krzysztof , Świec Paweł , Prusik Krystian , Albrecht Robert , Stróż Danuta

Identyfikatory

DOI

10.24425/amm.2023.145486

• Języki publikacji: EN

Abstrakty

EN

In the presented work, two multicomponent Cr₂₅Zr₂₅Co₂₀Mo₁₅Si₁₀Y₅ and Cr₂₅Co₂₅Zr₂₀Mo₁₅Si₁₀Y₅ alloys were produced from bulk chemical elements using the vacuum arc melting technique. X-ray diffraction phase analysis was used to determine the phase composition of the obtained materials. Microstructure analysis included scanning electron microscopy and energy dispersive X-ray spectroscopy techniques. The studies revealed the presence of multi-phase structures in both alloys. Elemental distribution maps confirmed the presence of all six alloying elements in the microstructure. The segregation of chemical elements was also observed. Microhardness measurement revealed that both alloys exhibited microhardness from 832(27) to 933(22) HV1.

Słowa kluczowe

EN

multicomponent alloys; X-ray diffraction; electron microscopy; microstructure; microhardness

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 3
• Strony: 1143--1149
• Opis fizyczny: Bibliogr. 38 poz., fot., rys., tab.

Twórcy

autor

Glowka Karsten

• University of Silesia in Katowice, Institute of Materials Engeenering, Chorzów, Poland

• https://orcid.org/0000-0002-1889-5557

autor

Zubko Maciej

• University of Silesia in Katowice, Institute of Materials Engeenering, Chorzów, Poland
• Uninersity of Hradec Králové, Department of Physics, Hradec Králové, Czech Republic

• https://orcid.org/0000-0002-8987-3902

autor

Piotrowski Krzysztof

• University of Silesia in Katowice, Institute of Materials Engeenering, Chorzów, Poland

• https://orcid.org/0000-0002-9145-5179

autor

Świec Paweł

• University of Silesia in Katowice, Institute of Materials Engeenering, Chorzów, Poland

• https://orcid.org/0000-0002-5445-8530

autor

Prusik Krystian

• University of Silesia in Katowice, Institute of Materials Engeenering, Chorzów, Poland

• https://orcid.org/0000-0002-0538-0749

autor

Albrecht Robert

• University of Silesia in Katowice, Institute of Materials Engeenering, Chorzów, Poland

• https://orcid.org/0000-0003-3026-1474

autor

Stróż Danuta

• University of Silesia in Katowice, Institute of Materials Engeenering, Chorzów, Poland

• https://orcid.org/0000-0001-9208-0797

Bibliografia

• [1] J.W. Yeh, High-Entropy Alloys: Fundamentals and Applications, Springer International Publishing (2016).
• [2] B. Cantor, I.T.H. Chang, P. Knight, A.J.B. Vincent, Mater. Sci. Eng. A, (2004). DOI: https://doi.org/10.1016/j.msea.2003.10.257
• [3] J.W. Yeh et al., Adv. Eng. Mater. (2004). DOI: https://doi.org/10.1002/adem.200300567.
• [4] B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, R.O. Ritchie, Science (2014). DOI: https://doi.org/10.1126/science.1254581
• [5] W. Li, D. Xie, D. Li, Y. Zhang, Y. Gao, P.K. Liaw Prog. Mater. Sci. (2021). DOI: https://doi.org/10.1016/j.pmatsci.2021.100777
• [6] W. Yang, S. Pang, Y. Liu, Q. Wang, P.K. Liaw, T. Zhang, Intermetallics (2021). DOI: https://doi.org/10.1016/j.intermet.2021.107421
• [7] C.H. Chen, Y.J. Chen, Scr. Mater. (2019). DOI: https://doi.org/10.1016/j.scriptamat.2018.11.023
• [8] K. Glowka et al., Arch. Metall. Mater. (2019). DOI: https://doi.org/10.24425/amm.2019.127603
• [9] K. Glowka et al. Arch. Metall. Mater. (2019). DOI: https://doi.org/10.24425/amm.2019.127614
• [10] Y. Zhang, Y.J. Zhou, J.P. Lin, G.L. Chen, P.K. Liaw, Adv. Eng. Mater. (2008). DOI: https://doi.org/10.1002/adem.200700240
• [11] Y.F. Ye, Q. Wang, J. Lu, C.T. Liu, Y. Yang, Mater. Today, (2016). DOI: https://doi.org/10.1016/j.mattod.2015.11.026
• [12] A. Inoue, Acta Mater. (2000). DOI: 10.1016/S1359-6454(99)00300-6
• [13] R. Fulchiron, I. Belyamani, J. U. Otaigbe, V. Bounor-Legaré, Sci. Rep. (2015). DOI: https://doi.org/10.1038/srep08369
• [14] A.A. Shirzadi, T. Kozieł, G. Cios, P. Bała, J. Mater. Process. Technol. (2019). DOI: https://doi.org/10.1016/j.jmatprotec.2018.09.028
• [15] R.C. Budhani, T.C. Goel, K.L. Chopra, Bull. Mater. Sci. (1982). DOI: https://doi.org/10.1007/BF02824962
• [16] J.K. Carpenter P.H. Steen, J. Mater. Sci. (1992). DOI: https://doi.org/10.1007/BF00553859.
• [17] L. Xiao, Z. Zheng, P. Huang, F. Wang, Scr. Mater. (2022). DOI: https://doi.org/10.1016/j.scriptamat.2021.114454
• [18] S. Li, T. Yamaguchi, Surf. Coatings Technol. (2022). DOI: https://doi.org/10.1016/j.surfcoat.2022.128123
• [19] M. Cai, Q. Luo, Q. Zeng, B. Shen, J. Magn. Magn. Mater. (2021). DOI: https://doi.org/10.1016/j.jmmm.2021.167817
• [20] P. Hruška et al., J. Alloys Compd. (2021). DOI: https://doi.org/10.1016/j.jallcom.2020.157978
• [21] C. Xie et al., J. Non. Cryst. Solids. (2019). DOI: https://doi.org/10.1016/j.jnoncrysol.2019.03.039
• [22] A. Chrobak, M. Karolus, G. Haneczok, Solid State Phenom. (2010. DOI: https://doi.org/10.4028/www.scientific.net/SSP.163.233
• [23] Y. Zhang et al., Prog. Mater. Sci. (2014). DOI: https://doi.org/10.1016/j.pmatsci.2013.10.001.
• [24] K. Glowka et al., Metals (Basel). (2020). DOI: https://doi.org/10.3390/met10111456
• [25] X. Yang, Y. Zhang, Mater. Chem. Phys. (2012). DOI: https://doi.org/10.1016/j.matchemphys.2011.11.021
• [26] T. Thandorn, P. Tsakiropoulos, Materials (Basel) (2021). DOI: https://doi.org/10.3390/ma14247615
• [27] P. Novák, Z. Barták, K. Nová, F. Průša, Materials (Basel) (2020). DOI: https://doi.org/10.3390/ma13030800
• [28] X.J. Jiang et al., Mater. Lett. (2022). DOI: https://doi.org/10.1016/j.matlet.2021.131131
• [29] B. Chanda, J. Das, J. Alloys Compd. (2022). DOI: https://doi.org/10.1016/j.jallcom.2022.163610
• [30] Y. Liu et al., J. Alloys Compd. (2017). DOI: https://doi.org/10.1016/j.jallcom.2016.10.014
• [31] J.M.S. de Sousa, A. de S.P. Pereira, M. Pereira, R.G.N. Silva, J. Laser Appl. (2020). DOI: https://doi.org/10.2351/7.0000099
• [32] K. Glowka et al. Materials (Basel) (2022). DOI: https://doi.org/10.3390/ma15010393
• [33] T. Nagase, M. Todai, P. Wang, S.-H. Sun, T. Nakano, Mater. Chem. Phys. (2022). DOI: https://doi.org/10.1016/j.matchemphys.2021.125409
• [34] P. Tunthawiroon, A. Chiba, IOP Conf. Ser. Mater. Sci. Eng. (2019). DOI: https://doi.org/10.1088/1757-899X/635/1/012006
• [35] S.-S. Ahn et al., Materials (Basel) (2018). DOI: https://doi.org/10.3390/ma11112150
• [36] L. Giersberg, B. Milkereit, C. Schick, O. Kessler, Mater. Sci. Forum (2014). DOI: https://doi.org/10.4028/www.scientific.net/MSF.794-796.939
• [37] R. Liu, J. Yao, Q. Zhang, M.X. Yao, R. Collier, J. Eng. Mater. Technol. (2016). DOI: https://doi.org/10.1115/1.4034075
• [38] L.J. Zhang et al., Mater. Sci. Eng. A, (2018). DOI: https://doi.org/10.1016/j.msea.2018.04.058