Electrophoretic deposition of nc-TiO2/chitosan composite coatings on X2CrNiMo17-12-2 stainless steel

• Autorzy: Ledwig P. , Kot M. , Moskalewicz T. , Dubiel B.

Identyfikatory

DOI

10.1515/amm-2017-0063

• Języki publikacji: EN

Abstrakty

EN

This paper presents the results of the optimization of electrophoretic deposition parameters for manufacturing of nc-TiO2/chitosan composite coatings on X2CrNiMo17-12-2 steel as well as characterization of their microstructure, electrochemical properties and adhesion to the substrate. The parameters of the deposition, such as composition, pH and zeta potential of suspensions as well as voltage and process time were investigated. The microstructure of the coatings was characterized using scanning and transmission electron microscopy. Obtained coatings were crack-free and uniform. The adhesion strength to the substrate was measured by scratch-test method. The deposited coatings improve corrosion resistance of steel, what was confirmed by the results of the potentiodynamic polarization test in Ringer’s solution.

Słowa kluczowe

EN

chitosan; TiO2; electrophoretic deposition; X2CrNiMo17-12-2 steel

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 1
• Strony: 405--410
• Opis fizyczny: Bibliogr. 28 poz., rys., tab.

Twórcy

autor

Ledwig P.

• AGH University of Science and Technology, 30 A. Mickiewicza Al., 30-059 Kraków, Poland

autor

Kot M.

• AGH University of Science and Technology, 30 A. Mickiewicza Al., 30-059 Kraków, Poland

autor

Moskalewicz T.

• AGH University of Science and Technology, 30 A. Mickiewicza Al., 30-059 Kraków, Poland

autor

Dubiel B.

• AGH University of Science and Technology, 30 A. Mickiewicza Al., 30-059 Kraków, Poland

Bibliografia

• [1] J.A. Disegi, L. Eschbach, Injury 31, D2 (2000).
• [2] J. Walczak, F. Shahgaldi, F. Heatley, Biomaterials 19, 229 (1998).
• [3] Chun-Che Shih, Chun-Ming Shih, Yea-Yang Su , Lin Hui Julie Su, Mau-Song Chang, Shing-Jong Lin, Corros. Sci. 46, 427 (2004).
• [4] G. Bordji, J.-Y. Jouzeau, D. Mainard, E. Payan, J.-P. Delagoutte, P. Netter, Biomaterials 17, 491 (1996).
• [5] J.H. Park, J.S. Kim, J.M. Park. Surf. Coat. Tech. 8, 172 (2013).
• [6] L. Visai, L. De Nardo, C. Punta, L. Melone, A. Cigada, M. Imbriani, C.R. Arciola, Int. J. Artif. Organs. 34 (9), 929 (2011).
• [7] H. Haick, Y. Paz, J. Phys. Chem. B 105 (15), 3045 (2001).
• [8] L.C Gerhardt, G.M.R. Jell, A.R. Boccaccini, J. Mater. Sci.: Mater. Med. 18, 1287 (2007).
• [9] K.A.M. Amin, M. Panhuis, Polymers 4, 590 (2012).
• [10] Fei Chen, Zhou-Cheng Wang, Chang-Jian Lin, Mater. Lett. 57, 858 (2002).
• [11] H. Honarkar, M. Barikani, Monatsh. Chem. 140, 1403 (2009).
• [12] L.L. Shaw, D. Goberman, R. Ren, M. Gell, S. Jiang, Y. Wang, T.D. Xiao, P.R. Strutt, Surf. Coat. Tech. 130, 1 (2000).
• [13] A. Góral, L. Lityńska-Dobrzyńska, W. Zórawski, K. Berent, J. Wojewoda-Budka, Arch. Metall. Mater. 58, 335 (2013).
• [14] D. Velten, V. Biehl, F. Aubertin, B. Valeske, W. Possart, J. Breme, J. Biomed. Mater. Res. A. 59, 18 (2002).
• [15] D.P. Macwan, Pragnesh N. Dave, Shalini Chaturvedi, J. Mater. Sci. 46, 3669 (2011).
• [16] X. Nie, A. Leyland, A. Matthews, Surf. Coat. Tech. 125, 407 (2000).
• [17] Y. Han, D.H. Chen, L. Zhang, Nanotechnology 19, 335 (2008).
• [18] D. Hanaor, M. Michelazzi, P. Veronesi, C. Leonelli, M. Romagnoli, C. Sorrell, J. Eur. Ceram. Soc. 31, 1041 (2011).
• [19] L. Cordero-Arias, S. Cabanas-Polo, H. Gao, J. Gilabert, E. Sanchez, J.A. Roether, D.W. Schubert, S. Virtanen, A.R. Boccaccini, RSC Advances 3, 11247 (2013).
• [20] N.S. Raddaha, L. Cordero-Arias, S. Cabanas-Polo, S. Virtanen, J.A. Roether, A.R. Boccaccini, Materials 7, 1814 (2014).
• [21] T. Moskalewicz, A. Czyrska-Filemonowicz, A.R. Boccaccini, Surf. Coat. Tech. 201, 7467 (2007).
• [22] Laxmidhar Besra, Meilin Liu, Progress in Materials Science 52, 1 (2007).
• [23] H.Z. Abdullah, C.C. Sorrell, J. Aust. Ceram. Soc. 44 (2), 12 (2008).
• [24] I. Zhitomirsky, A. Hashambhoy, J. Mater. Process. Tech. 191, 68 (2007).
• [25] Q. Cai, Z. Gu, Y. Chen, W. Han, T. Fu, H. Song, F. Li, Carbohyd. Polym. 79, 783 (2010).
• [26] L. Besra, T. Uchikoshi, T.S. Suzuki, Y. Sakka, J. Eur. Ceram. Soc. 30, 1187 (2010).
• [27] G. Grundmeier, W. Schmidt, M. Stratmann, Electrochim. Acta 45, 2515 (2000).
• [28] L. Cordero-Arias, S. Cabanas-Polo, J. Gilabert, O.M. Goudouri, E. Sanchez, S. Virtanen, A.R. Boccaccini, Adv. Appl. Ceram. 113, 42 (2014).

Uwagi

EN

The work was supported by the statutory project of AGH-UST no. 11.11.110.293.

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).