PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Badania strukturalne i wytrzymałościowe stopu Co-Cr-Mo na konstrukcje protetyczne w technologii odlewania i spiekania laserowego

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Microstructural and strength studies Co-Cr-Mo alloy on prosthetic reconstructions in casting technology and laser sintering
Języki publikacji
PL
Abstrakty
PL
Laserowe spiekanie proszków metali (DMLS) jest nową technologią otrzymywania konstrukcji w procedurze CAD/CAM. Celem była identyfikacja strukturalna i wyznaczenie parametrów wytrzymałościowych stopu kobaltu na stałe uzupełnienia protetyczne wykonywane w dwóch technologiach. Materiałem badań był stop Co-Cr-Mo, z którego uzyskano próbki w technologii odlewania oraz w technologii DMLS. Stwierdzono, że DMLS jest technologią preferowaną do wykonawstwa konstrukcji dla protetyki i może stanowić alternatywę dla tradycyjnej metody odlewania.
EN
Direct Metal Laser Sintering (DMLS) is a new technology for obtaining reconstruction in the CAD / CAM procedure. The aim was to identify the structural and determination of strength parameters of cobalt alloy intended for fixed prosthetic restorations. carried out in two technologies. Test material was a Co-Cr-Mo alloy, from which the sample were obtained in a casting technology and DMLS technology. It was found that the DMLS is preferred technology for manufacturing reconstruction for prosthetics and can be an alternative to the traditional method of casting.
Rocznik
Strony
29--32
Opis fizyczny
Bibliogr. 21 poz., rys., tab.
Twórcy
autor
  • Akademia Górniczo-Hutnicza, Wydział Inżynierii Mechanicznej i Robotyki, Katedra Konstrukcji i Eksploatacji Maszyn, al. Mickiewicza 30, 30-059 Kraków
  • Akademia Górniczo-Hutnicza, Wydział Inżynierii Mechanicznej i Robotyki, Katedra Konstrukcji i Eksploatacji Maszyn, al. Mickiewicza 30, 30-059 Kraków
autor
  • Politechnika Krakowska, Wydział Mechaniczny, Instytut Inżynierii Materiałowej, Zakład Materiałów Inżynierskich, al. Jana Pawła II 37, 31-864 Kraków
autor
  • Akademia Górniczo-Hutnicza, Wydział Metali Nieżelaznych, Katedra Nauki o Materiałach i Inżynierii Metali Nieżelaznych, al. Mickiewicza 30, 30- 059 Kraków
Bibliografia
  • [1] Rodrigues W.C., Broilo L.R., Schaeffer L., Knörnschild G., Espinoza F.R.M., Powder metallurgical processing of Co–28% Cr–6% Mo for dental implants: Physical, mechanical and electrochemical properties, Powder Technology, 206 (2011), nr.3, 233-238
  • [2] Takaichi A., Nakamoto T., Joko N., Nomura N., Tsutsumi Y., Migita S., Hanawa T., Microstructures and mechanical properties of Co–29Cr–6Mo alloy fabricated by selective laser melting process for dental applications, Journal of the mechanical behavior of biomedical materials, 21 (2013), 67-76.
  • [3] Ciocca L., Fantini M., de Crescenzio F., Corinaldesi G., Scotti R., Direct metal laser sintering (DMLS) of a customized titanium mesh for prosthetically guided bone regeneration of atrophic maxillary arches, Medical & Biological Engineering & Computing, 49 (2011), nr.11, 1347-52
  • [4] Iseri U., Ozkurt Z., Kazazoglu E., Shear bond strengths of veneering porcelain to cast, machined and laser-sintered titanium, Dental Materials Journal, 30 (2011), nr.3, 274-80
  • [5] Ramırez L.E., Castro M., Méndez M., Lacaze J., Herrera M., Lesoult G., Precipitation path of secondary phases during solidification of the Co–25.5% Cr–5.5% Mo–0.26% C alloy, Scripta materialia, 47 (2002), nr.12, 811-816
  • [6] Jevremovic D., Puskar T., Kosec B., Vukelic D., Budak I., Aleksandrovic S., Williams R., The analysis of the mechanical properties of F75 Co-Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial dentures (RPD), Metalurgija, 51 (2012), nr.2, 171-174
  • [7] España F.A., Balla V.K., Bose S., Bandyopadhyay A., Design and fabrication of CoCrMo alloy based novel structures for load bearing implants using laser engineered net shaping, Materials Science and Engineering: C, 30 (2010), nr.1, 50-57
  • [8] Norma PN-EN ISO 6507-1:2007: Metale - Pomiar twardości sposobem Vickersa – Część 1: Metoda badań
  • [9] Giacchi J.V., Morando C.N., Fornaro O., Palacio H.A., Microstructural characterization of as-cast biocompatible Co– Cr–Mo alloys, Materials Characterization, 62 (2011), nr.1, 53-61
  • [10] Ram G.J., Esplin C.K., Stucker B.E., Microstructure and wear properties of LENS® deposited medical grade CoCrMo, Journal of Materials Science: Materials in Medicine, 19 (2008), nr.5, 2105-2111
  • [11] Matković T., Matković P., Malina J., Effects of Ni and Mo on the microstructure and some other properties of Co–Cr dental alloys, Journal of Alloys and Compounds, 366 (2004), nr.1, 293-297
  • [12] Mori M., Yamanaka K., Matsumoto H., Chiba A., Evolution of cold-rolled microstructures of biomedical Co-Cr-Mo alloys with and without N doping, Materials Science and Engineering: A, 528 (2010), nr.2, 614-621
  • [13] Yoda K., Takaichi A., Nomura N., Tsutsumi Y., Doi H., Kurosu S., Hanawa T., Effects of chromium and nitrogen content on the microstructures and mechanical properties of as-cast Co– Cr–Mo alloys for dental applications, Acta biomaterialia, 8 (2012), nr.7, 2856-2862
  • [14] Karaali A., Mirouh K., Hamamda S., Guiraldenq P., Microstructural study of tungsten influence on Co–Cr alloys, Materials Science and Engineering: A, 390 (2005), nr.1, 255-259
  • [15] Sato Y., Nomura N., Fujinuma S., Chiba A., Microstructure and tensile properties of hot-pressed co-cr-mo alloy compacts for biomedical applications, Journal of the Japan Institute of Metals, 72 (2008), nr.7, 532-537
  • [16] Sato Y., Nomura N., Fujinuma S., Chiba A., Microstructure and mechanical properties of hot-pressed co-cr-mo alloy compacts, Advanced Materials Research, 26 (2007), 769-772
  • [17] Grądzka-Dahlke M., Dąbrowski J.R., Dąbrowski B., Modification of mechanical properties of sintered implant materials on the base of Co–Cr–Mo alloy, Journal of materials processing technology, 204 (2008), nr.1, 199-205
  • [18] Henriques B., Soares D., Silva F.S., Microstructure, hardness, corrosion resistance and porcelain shear bond strength comparison between cast and hot pressed CoCrMo alloy for metal–ceramic dental restorations, Journal of the mechanical behavior of biomedical materials, 12 (2012), 83-92
  • [19] Wu L., Zhu H., Gai X., Wang Y., Evaluation of the mechanical properties and porcelain bond strength of cobalt-chromium dental alloy fabricated by selective laser melting, The Journal of prosthetic dentistry, 111 (2014), nr.1, 51-55
  • [20] Quante K., Ludwig K., Kern M., Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology, Dental Materials, 24 (2008), nr.10, 1311-1315
  • [21] Hanawa T., Hiromoto S., Asami K., Characterization of the surface oxide film of a Co–Cr–Mo alloy after being located in quasi-biological environments using XPS, Applied Surface Science, 183 (2001), nr.1, 68-75
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-4e15bd7a-d62e-40cb-b46b-174be476a57e
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.