PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Investigations of Single and Multilayer Structures Using Lock-In Thermography - Possible Applications

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper presents a study of the possibilities of evaluating thermal parameters of single and multilayer structures using dynamic thermography. It also discusses potential uses of lock-in thermography. It presents a simulation of a periodic excitation of a multilayer composite material. In practice, the described methods can be employed in various applications, for example, in multilayer nonwoven microelectronic components manufactured from hemp fibers, chemical fibers, with an addition of electrically conducting fibers, and in medicine and biology. This paper describes tests conducted with lock-in thermography on carbon fibre reinforced composites with implanted delamination defects. Lock-in thermography is a versatile tool for non-destructive evaluation (NDE). Lock-in thermography is a fast, remote and non-destructive procedure. Hence, it has been used to detect delaminations in the composite structure of aircraft. This method directly contributes to an improvement in safety.
Rocznik
Strony
211--215
Opis fizyczny
Bibliogr. 9 poz., rys., tab., wykr.
Twórcy
autor
  • Department of Personal Protective Equipment, Central Institute for Labour Protection – National Research Institute, Łódź, Poland
autor
  • Department of Personal Protective Equipment, Central Institute for Labour Protection – National Research Institute, Łódź, Poland
autor
  • Institute of Electronics, Technical University of Łódź, Łódź, Poland
Bibliografia
  • 1. Almond DP, Patel PM. Photothermal science and techniques. London, UK; Chapman & Hall; 1996.
  • 2. Almond DP, Lau C K. Defect sizing by transient thermography, an analytical treatment. J Phys D: Appl Phys 194;27:1063–9.
  • 3. Krapez J-C. Compared performances of four algorithms used for digital lockin thermography. In: Proceedings of the Eurotherm Seminar 60: Quantitative Infrared Thermography 4—QIRT ’98, September 7– 10, 1998, Łódź, Poland. Retrieved July 15, 2004, from: http://www.onera.fr/SEARCH/BASIS/public/web_en/document/DDD/ 301679.pdf
  • 4. Netzelmann U, Walle G. High-speed pulsed thermography of thin metallic coatings. In: Proceedings of the Eurotherm Seminar 60 Quantitative Infrared Thermography–QIRT ’98, September 7–10, 1998, Łódź, Poland, p. 81–5.
  • 5. Bai W, Wong BS. Evaluation of defects in composite plates under convective environments using lock-in thermography. Measurements Science and Technology 2001;12:142–50.
  • 6. Almond D, Busse G, Grinzato E, Krapez JC, Maldague X, Vavilov V, et al. Infrared thermographic detection and characterisation of impact damage in carbon fibre composites: results of the round robin test. In: Proceedings of the Eurotherm Seminar 60 Quantitative Infrared Thermography— QIRT ’98, September 7–10, 1998, Łódź, Poland, p. 43–52.
  • 7. Krucińska I, Michalak M. Barrier properties of textiles with hemp fiber components. In: Włókiennictwo: 2nd international conference, MTE 2000, Metrology in Textile Engineering. 1st international workshop, NETECOFLAX-2000, Ecological high quality cottonized flax fabrics production from worthless raw material, November 23– 24, 2000, Łódź, Poland (Zeszyty Naukowe, No. 855). Łódź, Poland: Wydawnictwo Politechniki Łódzkiej; 2000.
  • 8. Michalak M, Krucińska I, Więcek B. Application of thermography for slow and fast varying thermal processes in textile research In: Proceedings of Eurotherm Seminar No. 64, Reims, France, July 18–21, 2000. p. 283–8.
  • 9. Więcek B, Zwolenik S. Thermal wave method—limits and potentialities of active thermography in biology and medicine. In: 2nd Joint EMBS-BMES Conference, 24th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, BMES-EMS 2002, Houston, TX, USA, October 23–26, 2002.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-4dfd56e1-8874-4b90-ba4f-60faeda3a4c9
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.