Introduction to the technical and economic analysis of the production process with the use of computer simulation

• Autorzy: Ogorzałek Justyna

Identyfikatory

DOI

10.30464/jmee.2019.3.2.121

• Języki publikacji: EN

Abstrakty

EN

The article presents the most important information concerning the methods, techniques and indicators of I measures, which are used in the evaluation of production processes. The theory of limitations, process mapping, benchmarking and diagnostic test method have been described. Sample indicators for the evaluation of production processes are presented and the measures for the evaluation of production processes are discussed, as well as methods of obtaining information about the process. The modelling and computer simulations were described and the algorithm of proceeding during the development of a simulation model was presented. The article discusses system dynamics modelling, discrete event modelling and agent modelling.

Słowa kluczowe

EN

production process; technical-economic analysis; computer simulation; discrete modelling; agent modelling

PL

proces produkcyjny; analiza techniczno-ekonomiczna; symulacja komputerowa; modelowanie dyskretne; modelowanie agentowe

• Wydawca: Wydawnictwo Uczelniane Politechniki Koszalińskiej
• Czasopismo: Journal of Mechanical and Energy Engineering
• Rocznik: 2019
• Tom: Vol. 3, No 2
• Strony: 121--130
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Ogorzałek Justyna

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Raclawicka 15-17, 75-620 Koszalin, Poland

Bibliografia

• 1. Ciszak O. (2007). Computer-aided modelling and simulation of production processes, Scientific Papers of the Poznań University of Technology, No. 3 (in Polish).
• 2. Dohn K. (2006). Study of production process evaluation in a industrial enterprise, Wydawnictwo Politechniki Śląskiej (in Polish).
• 3. Durlik I. (1998). Restructuring of economic processes – reengineering – theory and practice, Agencja Wydawnicza “Placet” (in Polish)
• 4. Grigoryev I. (2016). AnyLogic in three days, 7-10, 21-23.
• 5. Hofman M., E. Skrzypek E. (2010). Process management in the company, Wolters Kluwer Polska Sp. z o.o., 76-77 (in Polish).
• 6. Knosala R. (2017). Production engineering. Compendium of knowledge, Polskie Wydawnictwo Ekonomiczne S.A, 789-790 (in Polish).
• 7. Kotliński A. (2011), Logistics, No. 5/2011.
• 8. Kukla S., Maciąg A., Pietroń R. (2013). Forecasting and simulation in the company, Polskie Wydawnictwo Ekonomiczne, 148-149, 173, 183-187, 197-198, 202-209, 214, 216 -218, 220, 223-224, 231, 236, 277-278, 283, 296-297 (in Polish).
• 9. Łatuszyńska M. (2011). Computer simulation methods – logical classinfication test, Studies & Proceedings of Polish Association for Knowledge Management, nr 41, 168-170 (in Polish).
• 10. Siciak P. (2002). Approach deliberately, Magazyn Kadry Zarządzającej, 3 (in Polish).
• 11. Włodarkiewicz-Klimek H. (2016). Concept and models of agile company, Zeszyty Naukowe Politechniki Poznańskiej, nr 71, 214 (in Polish).
• 12. Zdanowicz R. (2006). Selection of software for modeling and simulation of manufacturing processes, Pomiary Automatyka Robotyka, nr 1, 10-14 (in Polish).
• 13. www.governica.com (access: January 2019).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).