PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Identification of ultrasonic frequency for water mist generation using piezoelectric transducer

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Purpose: Water is the most commonly used medium for fire extinguishing. It is both cheap and has high latent heat of evaporation. But the volume of water required for extinguishing the fire is significantly high, this in turn increases the amount of water stored. This can be reduced significantly by improving the efficiency of the extinguishing action by fire suppression. Water mist fire suppression system, Water mist fire extinguisher, fire hydrant are some of the commonly available methods for fire extinguishment process. This paper is about investigation on ultrasonic frequency for water mist generation without pressurized system. Design/methodology/approach: This technique helps reduce the usage of water required for fire extinguishment to a minimum level. Here H-bridge circuit has been designed with piezoelectric transducer which will operate at various frequency range (0 to 3 MHz). The developed model has been used to predict the minimum frequency required for water mist formation, which is about 2 MHz. Findings: An electrical circuit with h-bridge circuit and piezoelectric transducer has been specifically designed for water mist formation using ultrasonic vibrator has been fabricated. It is a tunable frequency circuit. The tunable frequency range various up to maximum of 3 MHz. From the above experimentation it has been identified that minimum 2 MHz Frequency is required for water mist formation in the water reservoir. Future research in this technique for water mist formation with high rating and increase in number of PET could provide better results. Fine water droplet is also possible with high rating frequency. Research limitations/implications: The developed model has been used to predict the minimum frequency required for water mist formation, which is about 2 MHz. These results will be useful in optimizing the water mist suppression system by varying the frequency and distance from the flame.
Rocznik
Strony
74--78
Opis fizyczny
Bibliogr. 8 poz.
Twórcy
  • Deptartment of Mechanical Engineering in Mepco Schlenk Engineering College, Sivakasi - 626 005, Virudhunagar District, Tamilnadu, India
  • Deptartment of Mechanical Engineering in Mepco Schlenk Engineering College, Sivakasi - 626 005, Virudhunagar District, Tamilnadu, India
Bibliografia
  • [1] L. De-pin, Ch. Zu-Mu-Ming, Numerical simulation of water mist fire suppression technology, Procedia Engineering 11 (2011) 205-209.
  • [2] A. Jenft, A. Collin, P. Boulet, G. Pianet, A. Breton, A. Muller, Experimental and numerical study of pool fire suppression using water mist, Fire Safety Journal 67 (2014) 1-12.
  • [3] L. Jian-Yong, L. Dong, Z. Zhe, D. Wen-Li, Progress in research and application of electronic ultrasonic water mist fire suppression technology, Procedia Engineering 11 (2011) 288-295.
  • [4] F. Barreras, H. Amaveda, A. Lozano, Transient highfrequency ultrasonic water atomization, Experiments in Fluids 33 (2002) 405-413.
  • [5] Y. Fang, Y. Zhang, L. Lin, G. Liao, X. Huang, B. Cong, Experimental studies on interaction of water mist with class K fires, Fire Technology 40/4 (2004) 309-333.
  • [6] Z. Liu, D. Carpenter, A.K. Kim, Application of water mist to extinguish large oil pool fires for industrial oil cooker protection, International Association for Fire Safety Science 8 (2005) 741-752.
  • [7] P. Yang, T. Liu, X. Qin, Experimental and numerical study on water mist suppression system on room fire, Building and Environment 45/10 (2010) 2309- 2316.
  • [8] A. Lozano, H. Amaveda, F. Barreras, X. Jorda, M. Lozano, High-frquency ultrasonic atomization with pulsed excitation, Journal of Fluids Engineering 125 (2003) 941-945.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-4cc3e390-5641-4658-a316-f64e8be69563
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.