Thermogravimetric analysis of commercial thermally modified wood

• Autorzy: Grześkowiak W. Ł. , Bartkowiak M.

Identyfikatory

DOI

10.12841/wood.1644-3985.109.02

• Języki publikacji: EN

Abstrakty

EN

In the article the results are shown of a thermogravimetric analysis of four thermally modified wood species. Thermally modified wood before and after the extraction process was used for the tests. The extraction process had no significant effect on changes in the thermal characteristics either in the raw wood or in the modified wood, irrespective of the tested wood species.

Słowa kluczowe

EN

wood modification; thermal modification; thermogravimetric analysis; mass loss; temperature

• Wydawca: Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
• Czasopismo: Drewno : prace naukowe, doniesienia, komunikaty
• Rocznik: 2015
• Tom: vol. 58, nr 194
• Strony: 23--36
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Grześkowiak W. Ł.

• Poznań University of Life Sciences, Poznan, Poland

autor

Bartkowiak M.

• Poznań University of Life Sciences, Poznan, Poland

Bibliografia

• Anonymous [2003]: ThermoWood Handbook [accessed: 15.03.2007]. Finnish Thermowood Association. Helsinki, Finland. Available from: www.thermowood.fi
• Boonstra M.J., Tjeerdsma B.F., Groeneveld H.A.C. [1998]: Thermal modification nondurable wood species. 1. The Plato technology: thermal modification of wood. International Research Group on Wood Preservation. Doc No. IRG/WP 98-40123: 13
• Deka M., Humar M., Rep G., Kričej B., Šentjurc M., Petrič M. [2008]: Effects of UV irradiation on colour stability of thermally modified, copper ethanolamine treated and non-modified wood: EPR and DRIFT spectroscopic studies. Wood Science and Technology 42 [1]: 5–20
• Garrote G., Dominguez H., Parajo J.C. [1999]: Hydrothermal processing of lignocellulosic materials. Holz als Roh – und Werkstoff 57 [3]: 191–202
• Grześkiewicz M. [2003]: Kerto i Termo Wood – nowe materiały na rynku polskim (Kerto and Thermo Wood – new materials on polish market). Przemysł Drzewny 4/2003: 14–16
• Grześkowiak W.Ł., Bartkowiak M. [2010a]: Flammability of thermally modified wood originated from the industry – part I – mass losses. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology No 71: 221–224
• Grześkowiak W.Ł., Bartkowiak M. [2010b]: Flammability of thermally modified wood originated from the industry – part II – temperature distribution. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology No 71: 225–228
• Hill C.A.S. [2006]: Wood Modification. Chemical, Thermal and Other Process. John Willey and Sons Ltd. West Sussex, England
• Huber H. [2006]: Thermally Modified Timber – The very dry end of drying [accessed: 10.12.2008]. EDG Drying Seminar, Hamburg: 34–47. Available from: http://www.timberdry.net/downloads/EDG-Seminar/EDG_Seminar_all.pdf
• Jabłoński D. [2005]: Thermowood – drewno modyfikowane termicznie (Thermowood – thermally modified wood) [accessed: 19.03.2007]. Available from: www.drewno.pl
• Jämsä S., Viitaniemi P. [1998]: Heat treatment of wood. Better durability without chemicals. NordiskeTrebeskyttelsesdager: 47–51
• Mazela B., Plenzler R., Olek W. [2010]: Effects of thermal modification on decay resistance and mechanical properties of poplar and beech wood. Proceedings of the 6th IUFRO Symposium Wood structure and properties ‘10’. 6–9 September 2009, Podbanske, High Tatras, Slovakia: 141–144
• Mazela B., Zakrzewski R., Grześkowiak W., Cofta G., Bartkowiak M. [2003]: A preliminary research of the biological resistance of thermally modified wood. Proc. of the 1st European Conference on Wood Modification, Ghent, Belgium: 113–120
• Metsa-Kortelainen S., Antikainen T., Viitaniemi P. [2006]: The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170°C, 190°C, 210°C and 230°C. Holz als Roh – und Werkstoff 64 [3]: 192–197. DOI 10.1007/s00107-005-0063-y
• Militz H. [2002]: Thermal treatment of wood: European. Processes and their background. The International Research Group on Wood Preservation. Doc No IRG/WP 02-40241: 1–17
• Rapp A.O., Sailer M., Westin M. [2000]: Innovative Holzvergutung – neue Einsatzberichefür Holz. In: Tagungsband zur 17. Dreiländer Holztagung. Zürich: Schweizerische Arbeitsgemeinschaft für Holzforschung, Holz ART 2000: 153–160
• Syrjanen T., Jämsä S., Viitaniemi P. [2000]: Heat treatment wood in Finland. In: Proceedings of the seminar on production of heat treated wood in Europe. 20 November 2000 in Helsinki. Tekes Lahontorjuntayhdistys ry Kestopuu Oy: 15
• www.finnforest.com [accessed:19.03.2007]
• Tjeerdsma B.F., Boonstra M., Pizzi A., Tekely P., Militz H. [1998]: Characterisation of thermally modified wood: molecular reasons for wood performance improvement. Holz als Roh – und Werkstoff Volume 56 [3]: 149–153
• Vernois M. [2000]: Heat treatment in France. In: Proceedings of the seminar on production of heat treated wood in Europe. 20 November 2000 in Helsinki. Tekes Lahontorjuntayhdistys ry Kestopuu Oy: 6