PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Reduction of defects in the lapping process of the silicon wafer manufacturing: the Six Sigma application

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Aiming to reduce flatness (Total Thickness Variation, TTV) defects in the lapping process of the silicon wafer manufacturing, it is crucial to understand and eliminate the root cause(s). Financial losses resulting from TTV defects make the lapping process unsustainable. DMAIC (Define, Measure, Analyse, Improve and Control), which is a Six Sigma methodology, was implemented to improve the quality of the silicon wafer manufacturing process. The study design and the choice of procedures were contingent on customer requirements and customised to ensure maximum satisfaction; which is the underlying principle of the rigorous, statistical technique of Six Sigma. Previously unknown causes of high TTV reject rates were identified, and a massive reduction in the TTV reject rate was achieved (from 4.43% to 0.02%). Also, the lapping process capability (Ppk) increased to 3.87 (beyond the required standard of 1.67), suggesting sustainable long-term stability. Control procedures were also effectively implemented using the techniques of poka yoke and control charts. This paper explores the utility of Six Sigma, a quality management technique, to improve the quality of a process used in the semiconductor industry. The application of the Six Sigma methodology in the current project provides an example of the root cause investigation methodology that can be adopted for similar processes or industries. Some of the statistical tools and techniques were used for the first time in this project, thereby providing new analysis and quality improvement platform for the future. The article offers a deeper understanding of the factors that impact on the silicon wafer flatness in the lapping process. It also highlights the benefits of using a structured problem-solving methodology like Six Sigma.
Rocznik
Strony
87--105
Opis fizyczny
Bibliogr. 77 poz., rys., tab.
Twórcy
  • O.P. Jindal Global University, India
  • O.P. Jindal Global University, India
  • O.P. Jindal Global University, India
Bibliografia
  • Agarwal, R., & Bajaj, N. (2008). Managing outsourcing process: applying six-sigma. Business Process Management Journal, 14(6), 829-837.
  • Al-Aomar, R. (2006). A simulation-based DFSS for a lean service system. International Journal of Product Development, 3(3/4), 349-368.
  • Alexander, P., Antony, J., & Rodgers, B. (2019). Lean Six Sigma for small- and medium-sized manufacturing enterprises: a systematic review. International Journal of Quality & Reliability Management, 36(3), 378-397. doi: 10.1108/IJQRM-03-2018-0074
  • Andersson, R., Eriksson, H., & Torstensson, H. (2006) Similarities and differences between TQM, six-sigma and lean. The TQM Magazine, 18(3), 282-296.
  • Antony, J. (2004). Some pros and cons of six-sigma: an academic perspective. The TQM Magazine, 16(4), 303-306.
  • Antony, J. (2006). Six-sigma for service processes. Business Process Management Journal, 12(2), 234-248.
  • Antony, J., & Coronado, R. B. (2002). Design for six-sigma. IEE Manufacturing Engineer, 24-26.
  • Antony, J., Snee, R., & Hoerl, R. (2017). Lean Six Sigma: yesterday, today and tomorrow. International Journal of Quality & Reliability Management 34(7),1073-1093. doi: 10.1108/IJQRM-03-2016-0035
  • Arul, K., & Kohli, H. (2004). Six-sigma for software application of hypothesis tests to software Data. Software Quality Journal, 12(1), 29-42.
  • Bandyopadhyay, J., & Lichtman, R. (2007). Six-sigma approach to quality and productivity improvement in an institution for higher education in the United States. International Journal of Management, 24(4), 802-808.
  • Benedetto, A. (2003). Adapting manufacturing-based six-sigma methodology to the service environment of a radiology film library. Journal of Healthcare Management, 48, 263-80.
  • Boaden, R.J. (1997). What is total quality management… and does it matter? Total Quality Management, 8(4), 153-171.
  • Bolt, C., Keim, E., Kim, S., & Palser, L. (2000). Service quality sixsigma case studies. ASQ’s 54 th Annual Quality Congress Proceedings, Anais, 225-231.
  • Bothe, D. (2001). Statistical reason for the 1.5s shift. Quality Engineering, 14(3), 479-488.
  • Brewer, P., & Bagranoff, N.A. (2004). Near zero-defect accounting with six-sigma. Journal of Corporate Accounting & Finance (Wiley), 15(2), 67-43.
  • Breyfogle, F.W. III. (1999). Implementing six-sigma: smarter solutions using statistical methods. New York, United States: John Wiley & Sons.
  • Breyfogle, F.W., Cupello, J.M., & Meadows, B. (2001). Managing six-sigma: a practical guide to understanding, assessing, and implementing the strategy that yields bottom-line success. New York, United States: Wiley.
  • Brown, M.G., Hitchcock, D.E., & Willard, M.A. (1994). Why TQM fails and what to do about it. Boston, United States: Irwin Professional.
  • Bunce, M., Wang, L., & Bidanda, B. (2008). Leveraging six-sigma with industrial engineering tools in crateless retort production. International Journal of Production Research, 46(23), 6701-6719.
  • Byrne, J.A. (1998). How Jack Welch runs GE. Business Week, Charles, 8 June 1997, 90-104.
  • Cao, G., Clarke, S., & Lehaney, B. (2000). A systematic view of organisational change and TQM. The TQM Magazine, 12(3), 186-193.
  • Chappell, A., & Peck, H. (2006). Risk management in military supply chains: is there a role for six-sigma? International Journal of Logistics, 9(3), 253-67.
  • Cole, R. (1998). Learning from the quality movement. California Management Review, 41, 43-73.
  • Craven, E., Clark, J., Cramer, M., Corwin, S., & Cooper, M. (2006). New York-Presbyterian hospital uses six-sigma to build a culture of quality and innovation. Journal of Organizational Excellence, 25(4), 11-19.
  • Crosby, P.B. (1979). Quality is free. New York, United States: McGraw-Hill.
  • Crosby, P.B. (1984). Quality without tears. New York, United States: McGraw-Hill.
  • Cupryk, M., Takahata, D., & Morusca, D. (2007). Crashing the schedule’ in DCS validation pharmaceutical projects with lean Six-sigma and project management techniques: case study and discussion. Journal of Validation Technology, 13(3), 222-233.
  • Da Silva, I.B., Filho, M.G., Luiz, A.O., & Lima junior, O.F. (2019). A new Lean Six Sigma framework for improving competitiveness. Acta Scientiarum Technology, Maringa, 41, e37327. doi:10.4025/actascitechnol.v41i2.37327
  • Dimitri, K. (1991). Reliability engineering handbook. New Jersey, United States: Prentice-Hall, Englewood Cliffs.
  • Doble, M. (2005). Six-sigma and chemical process safety. International Journal of Six-sigma and Competitive Advantage, 1(2), 229-244.
  • Edgeman, R., Bigio, D., & Ferleman, T. (2005). Six-sigma and business excellence: strategic and tactical examination of IT service level management at the office of the chief technology officer of Washington, DC. Quality and Reliability Engineering International, 21(3), 257-273.
  • Esaki, K. (2016). Common Management Process Model of new TQM based on the situation analysis. Intelligent Information Management, 8(6), 181-193.
  • Eskildson, L. (1994). Improving the odds of TQM’s success. Quality Progress, 27(4), 61-63.
  • Evans, J.R., & Dean, J.W. Jr. (2002). Total Quality: Management, organisation, strategy. Mason, United States: South Western Publishing.
  • Foley, K. (2004). Five essays on quality management. Sydney, Australia: SAI Global Ltd.
  • Furterer, S., & Elshennawy, A. (2005). Implementation of TQM and lean six-sigma tools in local government: a framework and a case study. Total Quality Management and Business Excellence, 16(10), 1179-1191.
  • Gangidi, P.R. (2019). Application of Six Sigma in Semiconductor Manufacturing: A Case Study in Yield Improvement, Applications of Design for Manufacturing and Assembly. Ancuţa Păcurar, IntechOpen. doi: 10.5772/intechopen.81058. Retrieved from https://www.intechopen.com/books/applications-of-design-for-manufacturing-and-assembly/application-of-six-sigma-in-semiconductor-manufacturinga-case-study-in-yield-improvement
  • Garvin, D.A. (1988). Managing Quality: The strategic and competitive edge. New York, United States: The Free Press.
  • Gerhorst, F., Gromping, U., Lloyd-Thomas, D., & Khalaf, F. (2006). Design for six-sigma in product development at Ford Motor Company in a case study on robust exhaust manifold design. International Journal of Product Development, 3(3/4), 278-91.
  • Ghosh, S., & Rao, C.R. (Eds.) (1996). Design and analysis of experiments. Handbook of Statistics. 13. North-Holland.
  • Harari, O. (1997). Ten reasons why TQM doesn’t work. Management Review, 86(1), 38-44.
  • Harry, M.J. (1988). The nature of six-sigma quality. Rolling Meadows, United States: Motorola University Press.
  • Hoerl, R.W. (1998). Six-sigma and the future of the quality profession. Quality Progress, 31(6), 35-42.
  • Hossain, M.Z., Tasnim, M., & Hasan, M.R. (2017). Is Quality Ensuring to Get Competitive Advantages in Auto Manufacturing Industries? – A Study of Volvo Group. American Journal of Industrial and Business Management, 7(1), 48-68.
  • Ishikawa, K. (1968). Guide to quality control (Japanese): Gemba No QC Shuho. Tokyo, Japan: JUSE Press Ltd.
  • Ishikawa, K. (1985). What is Total Quality Control? The Japanese Way. New Jersey, United States: Englewood Cliffs, Prentice-Hall.
  • Jimoh, R., Oyewobi, L., Isa, R., & Waziri, I. (2018). Total Quality Management Practices and organisational performance: the mediating role of strategies for continuous improvements. International Journal of Construction Management, 19(2), 162-177.
  • Juran, J. (1995b). Summary, trends, and prognosis. In Juran, J.M. (Ed.). A History of managing for quality: The evolution, trends and future directions of managing for quality (pp. 603-657). Milwaukee, United States: ASQC Quality Press.
  • Kapur, K.C., & Lamberson, L.R. (1977). Reliability in engineering design. New York, United States: John Wiley & Sons.
  • Kazmierski, C. (2012). Semiconductor Industry Posts Record- Breaking Revenues Despite 2011 Challenges. Retrieved from http://www.sia-online.org/news/2012/02/06/global-salesreport-2012/semiconductor-industry-posts-record-breaking-revenues-despite-2011-challenges/
  • Kedar, A.P., Lakhe, R.R., Washimkar, V.S., & Wakhare, M.V. (2008). A comparative review of TQM, TPM and related organisational performance improvement programs. ICETET‘08: First International Conference on Emerging Trends in Engineering and Technology, India.
  • Kotz, S. (1993). Process capability indices. New York, United States: Chapman and Hall.
  • Kume, H. (1995). Management by quality. Tokyo, Japan: 3A Corporation.
  • Kume, H. (Ed.) (1985). Statistical methods for quality improvement. Tokyo, Japan: The Association for Overseas Technical Scholarship.
  • Magnusson, K., Kroslid, D., & Bergman, B. (2003). Six-sigma. The pragmatic approach. 2nd ed. Lund, Sweden: Student literature.
  • McClusky, R. (2000). The rise, fall and revival of six-sigma. Measuring Business Excellence, 4(2), 6-17.
  • Mishra, M.N. (2018). Identify critical success factors to implement integrated green and Lean Six Sigma. International Journal of Lean Six Sigma. doi: 10.1108/IJLSS-07-2017-0076
  • Muraliraj, J., Zailani, S., Kuppuswamy, S., & Santha, C. (2018). Annotated methodological review of Lean Six Sigma. International Journal of Lean Six Sigma, 9(1), 2-49. doi: 10.1108/IJLSS-04-2017-0028
  • Nwabueze, U. (2001). An industry betrayed: the case of total quality management in manufacturing. The TQM Magazine, 13(6), 400-408.
  • Padhy, R.K., & Sahu, S. (2011). A Real Option based Six-sigma project evaluation and selection model. International Journal of Project Management, 29, 1091-1102.
  • Pandey, A. (2007). Strategically focused training in six-sigma way: A case study. Journal of European Industrial Training, 31(2), 145-162.
  • Pyzdek, T. (2019). The six-sigma handbook: A complete guide for black belts, green belts and managers at all levels (5th edn.). New York, United States: McGraw-Hill.
  • Raman, R., & Basavaraj, Y. (2019). Defect reduction in a capacitor manufacturing process through Six Sigma concept: A case study. Management Science Letters, 9(2), 253-260.
  • Reeves, C.A., & Bednar, D.A. (1994). Defining quality: alternatives and implications. Academy of Management Review, 13, 419-445.
  • Roberts, C.M. (2004). Six-sigma signals. Credit Union Magazine, 70(1), 40-43.
  • Rucker, R. (2000). Citibank increases customer loyalty with defectfree processes. The Journal for Quality and Participation, 23, 32-36.
  • Schmidt, M., & Aschkenase, S. (2004). The building blocks of service. Supply Chain Management Review, 07-08, 34-40.
  • Sreedharan, R.V., Raju, R., Vijaya Sunder, M., & Jiju, A. (2019). Assessment of Lean Six Sigma Readiness (LESIRE) for manufacturing industries using fuzzy logic. International Journal of Quality & Reliability Management, 36(2), 137-161. doi: https://doi.org/10.1108/IJQRM-09-2017-0181
  • Su, C.T., & Chou, C.J. (2008). A systematic methodology for the creation of six-sigma projects: A case study of semiconductor foundry. Expert Systems with Applications, 34, 2693-2703.
  • Talapatra, S., Uddin, M.K., Rahman, M.H. (2018). Development of an Implementation Framework for Integrated Management System Based on the Philosophy of Total Quality Management. American Journal of Industrial Business Management, 8(6), 1507-1516.
  • Tobin, L.M. (1990). The new quality landscape: Total Quality Management. Journal of System Management, 41, 10-14.
  • Topalovic, S. (2015). The Implementation of Total Quality Management in order to improve production performance and enhancing the level of customer satisfaction. Procedia Technology, 19, 1016-1022.
  • Valles, A., Sanchez, J., Morales, Noriega S., & Gomez Nunez, B. (2009). Implementation of Six Sigma in a Manufacturing Process: A Case Study. The International Journal of Industrial Engineering: Theory, Applications and Practice, 16, 171-181.
  • Wright, A. (1997). Public service quality: Lessons not learned. Quality Management, 8(5), 313-318.
  • Wyper, B., & Harrison, A. (2000). Deployment of six-sigma methodology in human resource function: a case study. Total Quality Management, 11(4-6), S720-S727.
  • Yang, T., & Hsieh, C.H. (2009). Six-sigma project selection using national quality award criteria and Delphi fuzzy multiple decision-making method. Expert Systems with Applications, 36, 7594-7603.
  • Yong, J., & Wilkinson, A. (2002). The long and winding road. The evolution of quality management. Total Quality Management, 13(1), 101-121.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-4cc0439d-82dd-41f8-ba34-589880a29a39
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.