Physico-mechanical properties of Ti-containing chromium-free conversion coatings on zinc coated steel

• Autorzy: Winiarski J. , Szczygieł B.
• Języki publikacji: EN

Abstrakty

EN

This work aims at physico-mechanical properties of the Ti-containing chromium-free conversion coatings on zinc coated steel. The wear resistance of the whole conversion coating/zinc coating system depends on the deposition time of these coatings. As the duration of the deposition of conversion coatings containing titanium increases, the wear resistance of the samples decreases. The reason for this deterioration in wear resistance is likely worse adhesion of these coatings obtained at longer deposition times. The best adhesion to the zinc substrate posses coatings deposited for 20 s.

Słowa kluczowe

EN

zinc coating; corrosion resistance; conversion coating; adhesion; wear resistance

• Wydawca: Foundation for Young Scientists
• Czasopismo: Challenges of Modern Technology
• Rocznik: 2011
• Tom: Vol. 2, no. 4
• Strony: 27--30
• Opis fizyczny: Bibliogr. 11 poz., fot., rys., wykr.

Twórcy

autor

Winiarski J.

• Wrocław University of Technology, Division of Surface Engineering, Catalysis and Corrosion, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, phone: [phone]

autor

Szczygieł B.

Bibliografia

• [1] Berger, R., et al. “A comparative study of the corrosion protective properties of chromium and chromium free passivation methods.” Surface and Coatings Technology 2007: 391–397.
• [2] http://www.surtec.pl (on 26 may 2011)
• [3] http://www.enthone.pl (on 26 may 2011)
• [4] http://www.enthone.com.pl (on 26 may 2011)
• [5] da Silva, C.G., et al. “The molybdate-zinc conversion process.” Corrosion Science 2009: 151–158.
• [6] Song, Y.K., and F. Mansfeld. “Development of a Molybdate–Phosphate–Silane–Silicate (MPSS) coating process for electrogalvanized steel.” Corrosion Science 2006: 154–164.
• [7] Winiarski, J., and B. Szczygieł. „Odporność na korozję powłok konwersyjnych otrzymanych z roztworów zawierających związki Ti(III).” Ochrona przed Korozją 2010: 133–136 [in Polish].
• [8] Smit, M.A., et al. “Effect of organic additives on the performance of titanium-based conversion coatings.” Corrosion Science 2003: 1903–1920.
• [9] Adhikari, S., et al. “Hexafl uorozirconic acid based surface pretreatments: Characterization and performance assessment.” Electrochimica Acta 2011: 1912–1924.
• [10] Arenas, M.A., and J.J. de Damborenea. “Surface characterisation of cerium layers on galvanised steel” Surface & Coatings Technology 2004: 320–325.
• [11] Wilson, B., N. Fink, and G. Grundmeier. “Formation of ultra-thin amorphous conversion films on zinc alloy coatings Part 2: Nucleation, growth and properties of inorganic–organic ultra-thin hybrid films.” Electrochimica Acta 2006: 3066–3075.