Structural optimization on the design of an automobile engine intake pipe

• Autorzy: Xie Jianxin , Liu Zimeng

Identyfikatory

DOI

10.15632/jtam-pl/151069

• Języki publikacji: EN

Abstrakty

EN

The engine intake pipe is an important part of the engine. A reasonable layout of the intake pipe can prolong service life of the engine and improve engine power. The optimization of design of the intake pipe has a great impact on the overall performance of the engine. The design of the intake pipe based on experience is subjective and unilateral, and the design cycle and experimental period are long. Ansys Fluent software is used to simulate the design, which can more intuitively reflect the air flow condition of the intake pipe and enable selection of the best layout. First of all, a three-dimensional model of the intake pipe is simulated and the airflow characteristics are studied and analyzed. The streamline diagram and velocity contour under various conditions are obtained. Then, compared with the simulation results, the position of the intake pipe is optimized. Finally, the optimized intake pipe is simulated and verified. According to the experimental results, the intake performance of the optimized intake pipe is greatly improved.

Słowa kluczowe

EN

engine; intake pipe; Fluent; optimization design

• Wydawca: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
• Czasopismo: Journal of Theoretical and Applied Mechanics
• Rocznik: 2022
• Tom: Vol. 60 nr 3
• Strony: 449--461
• Opis fizyczny: Bibliogr. 22 poz., rys., tab.

Twórcy

autor

Xie Jianxin

• College of Intelligent Manufacturing, Qingdao Huanghai University, Qingdao, China

autor

Liu Zimeng

• College of Intelligent Manufacturing, Qingdao Huanghai University, Qingdao, China

Bibliografia

• 1. Adithya K., Ahmed F., Padmanathan P., Mohan C.G., Prakash R., 2020, Design optimization of intake manifold of dual fuel engine, Materials Today: Proceedings, 45, 646-651.
• 2. Agureev I.E., Elagin M.Yu., Pavlov D.V., Khmelev R.N., 2020, Studies of the process of heating air in the inlet pipe for starting a diesel engine at low temperatures, IOP Conference Series: Materials Science and Engineering, 971, 4, 042028.
• 3. Dhital N.B., Yang H.H., Wang L.C., Hsu Y.T., Zhang H.Y., Young L.H., Lu J.H., 2019, VOCs emission characteristics in motorcycle exhaust with different emission control devices, Atmospheric Pollution Research, 10, 5, 1498-1506.
• 4. Gao W.J., Zhou W.W., Zhao H.B., Zhang Q., 2017, Analysis of flow characteristics in intake pipe of gas engine (in Chinese), Internal Combustion Engines and Accessories, 3, 45-47.
• 5. Gobi K., Kannapiran B., Devaraj D., Valarmathi K., 2019, Design, performance evaluation and analysis of the inlet tube of pressure sensor for chamber pressure measurement, Sensor Review, 39, 4, 612-621.
• 6. Karthickeyan V., 2019, Effect of combustion chamber bowl geometry modification on engine performance, combustion and emission characteristics of biodiesel fuelled diesel engine with its energy and exergy analysis, Energy, 176, 830-852.
• 7. Khoa N.X., Lim O., 2019, The effects of combustion duration on residual gas, effective release energy, engine power and engine emissions characteristics of the motorcycle engine, Applied Energy, 248, 54-63.
• 8. Li H., 2018, Application of CFD analysis in intake manifold design (in Chinese), Proceedings of Henan Society of Automotive Engineering, 160-166.
• 9. Lin S.M., Lv Q.H., 2019, Cause analysis and countermeasures of carbon deposition in intake pipe of EA888 engine, Automotive Practical Technology, 10, 125-126.
• 10. Magdas V.B., Moldovanu D., Mastan D.C., 2019, Intake and exhaust pipe optimization for an internal combustion engine, IOP Conference Series: Materials Science and Engineering, 568, 1, 012048.
• 11. Mazzaro R.S., Hanriot S.M., Amorim R.J., Magalhães P.A.A. Jr , 2020, Numerical analysis of the air flow in internal combustion engine intake ducts using Herschel-Quincke tubes, Applied Acoustics, 165, 107310.
• 12. Shi D.X., Guo L.X., Li K.N., Yao C.D., Yang H.T., 2020, Effect of intake pipe structure on exhaust gas recirculation rate uniformity of natural gas engine (in Chinese), Internal Combustion Engine Engineering, 41, 3, 42-48.
• 13. Sun Z.Z., Wang B.T., Zheng X.Q., Kawakubo T., Tamaki H., Numakura R., 2020, Effect of bent inlet pipe on the flow instability behavior of centrifugal compressors, Chinese Journal of Aeronautics, 33, 8, 2099-2109.
• 14. Wahono B., Setiawan A., Lim O., 2019, Experimental study and numerical simulation on in-cylinder flow of small motorcycle engine, Applied Energy, 255, 113863.
• 15. Wang Y.Y., Ma Z.M., Hu S., Wang H.C., Gao Z.B., 2018, Study on the influence of intake manifold injection on the accelerated loading process of diesel engine, Automotive Engine, 5, 14-19.
• 16. Xu M., Wang D., Zhang Q.K., Zhang X.L., Wei S.T., Wang X.Z., 2021, Effect of structural optimization of light truck intake pipe on flow field characteristics of the system, Automotive Practical Technology, 46, 17, 128-130+141.
• 17. Yan K.N., Geng J., Wang X.J., Wang D.J., 2020, Optimal design of intake pipe of Honda energy saving racing engine (in Chinese), Internal Combustion Engines and Accessories, 23, 1-2.
• 18. Yi T., Bu Y.H., Chen M., Ju J., 2018, Model reconstruction and CFD analysis of gasoline engine intake pipe based on reverse design (in Chinese), Mechanical Design, 35, S1, 79-82.
• 19. Yin A.H., Li Z.Y., Wan P.Y., Zuo F.S., 2020, Research on short circuit fault of pure electric vehicle motor based on multi parameter, Forest Engineering, 36, 1, 103-108.
• 20. Zhang J., Ye L., Sun S.L., 2019, Shuli research on optimization design and processing technology of engine intake system based on Fluent (in Chinese), Hydraulic and Pneumatic, 9, 50-55.
• 21. Zheng Q.M., Zuo F.S., Zhu Y.X., Li Z.Y., Zhang Y., 2019, Research on vibration of permanent magnet synchronous motor based on modal analysis, Forest Engineering, 35, 5, 76-81.
• 22. Zhuang S.K., Lin M.S., Hu B.K., Zhuang W.J., 2020, Material technology and forming of engine variable diameter and different direction intake pipe, Employment and Security, 3, 23-24.