Powiadomienia systemowe
- Sesja wygasła!
Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
This paper describes research that developed a prototype chemical and biological (CB) protective firefighter suit. It is presented as a case study demonstrating an integrated systems approach to designing, developing and evaluating a protective clothing ensemble based on end user requirements. It includes a discussion of the process that was used to gain an understanding of firefighter performance needs for a structural turnout suit that also incorporated chemical protection. It describes the design features of the turnout suit that were developed to meet these expectations as well as the program of testing and evaluation used to characterize garment performance. It discusses ensemble level performance evaluations in instrumented fire manikin tests and man-in-stimulant test procedures. It describes studies conducted to determine the impact of prototype garment design features on heat stress, wear comfort and ergonomic function in structural firefighting applications.
Wydawca
Rocznik
Tom
Strony
135--152
Opis fizyczny
Bibliogr. 15 poz., rys., tab., wykr.
Twórcy
autor
- Center for Research on Textile Protection and Comfort, North Carolina State University, Raleigh, USA
autor
- Center for Research on Textile Protection and Comfort, North Carolina State University, Raleigh, USA
autor
- Center for Research on Textile Protection and Comfort, North Carolina State University, Raleigh, USA
autor
- Center for Research on Textile Protection and Comfort, North Carolina State University, Raleigh, USA
Bibliografia
- 1.iSixSigma. Quality dictionary and glossary: voice of the customer (VOC). Retrieved April 1, 2010, from: http://www.isixsigma .com/index.php?option=com_glossary&task=list&glossid=1&letter=v.
- 2.National Fire Protection Association (NFPA). 1971 standard on protective ensembles for structural fire fighting and proximity fire fighting, 2007 edition. Quincy, MA, USA: NFPA; 2007.
- 3.National Fire Protection Association (NFPA). 1994 standard on protective ensembles for first responders to CBRN terrorism incidents, 2007 edition. Quincy, MA, USA: NFPA; 2007.
- 4.Pollard NA, Tuohy RV, Garwin T. Project responder interim report emergency responders’ needs, goals, and priorities. McLean, VA, USA: Hicks and Associates; 2003.
- 5.Jackson BA, Peterson DJ, Bartis JT, LaTourrette T, Brahmakulam I, Houser A, et al. Protecting emergency responders: lessons learned from terrorist attacks. Santa Monica, CA, USA: Rand; 2002. Retrieved April 1, 2010, from: http://www.rand.org/pubs/conf_proceedings/2006/CF176.pdf.
- 6.Heniford RC. The effects of batting materials on the performance of turnout thermal liners [master of science thesis]. Raleigh, NC, USA: North Carolina State University; 2005.
- 7.Center for Research on Textile Protection and Comfort, North Carolina State University. Final Report on “Light weightCBRN protective fire fighter turnout” (Task 1986B for the Technical Support Working Group, Department of Homeland Security Contract No. W91CBR-04-C-004); 2007.
- 8.American Society for Testing and Materials (ASTM). Standard test method for evaluation of flame resistant clothing for protection against flash fire simulations using an instrumented manikin (Standard No. ASTM F 1930-00). West Conshohocken, PA, USA: ASTM International; 2000.
- 9.American Society for Testing and Materials (ASTM). Standard test method for thermal and evaporative resistance of clothing materials using a sweating hot plate, part C (Standard No. ASTM F 1868-02). West Conshohocken, PA, USA: ASTM International; 2002.
- 10.American Society for Testing and Materials (ASTM). Standard test method for measuring the thermal insulation of clothing using a heated manikin (Standard No. ASTM F1291-05). West Conshohocken, PA, USA: ASTM International; 2005.
- 11.American Society for Testing and Materials (ASTM). Standard test method for measuring the evaporative resistance of clothing using a sweating manikin (Standard No. ASTM F2370-05). West Conshohocken, PA, USA: ASTM International; 2005.
- 12.Kaufman J, Coleman S. Physiological, comfort, and ergonomic evaluation of firefighter turnout and hazmat garments phase 1 and 2 [unpublished report submitted to the Technical Support Working Group]. Patuxent River, MD, USA: Naval Air Systems Command, Human Systems Department (AIR 4.6.5.6); 2006.
- 13.American Society for Testing and Materials (ASTM). Standard practices for qualitatively evaluating the comfort, fit, function, and integrity of chemicalprotective suit ensembles (Standard No. ASTM 1154-99a; reapproved 2004). West Conshohocken, PA, USA: ASTM International; 2004.
- 14.Charlotte Fire Department. Candidate physical agility test. Retrieved March 1, 2010, from: http://www.charmeck.org/Departments/Fire/Recruitment/CPAT.htm.
- 15.Barker RL, Deaton AS, Liston GC. Human factors performance of a prototype firefightersuit with deployable CBRN features. In: Proceedings of 13th International Conference on Environmental Ergonomics [CD-ROM]. Boston, MA, USA: USARIEM. p. 103–7.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-4bf2e925-96d5-4656-9ac9-c13a89e56d7e