Thermodynamic properties of Al in ternary lead-free solder Al-Sn-Zn alloys

• Autorzy: Odusote Y. A. , Popoola A. I. , Adedayo K. D. , Ogunjo S. T.

Identyfikatory

DOI

10.1515/msp-2017-0080

• Języki publikacji: EN

Abstrakty

EN

Thermodynamic properties of Al were calculated using the molecular interaction volume model (MIVM) by analyzing the activities of components in the constitutive binary Al-Sn, Al-Zn and Sn-Zn subsystems of the ternary lead-free solder Al-Sn-Zn systems. The activities of Al content in the ternary system at three cross-sections with constant molar ratios of Sn:Zn = 2:1, 1:1 and 1:2, respectively, were calculated and compared with available experimental data at 973 K. Based on the agreement between the calculated activity values and corresponding literature data for Al-Sn-Zn alloys and their subsystems, the activity of Al content in the ternary Al-Sn-Zn system was estimated at the same cross-sections and mole ratios in the temperature range of 1073 K to 1373 K, respectively. It has been observed through the computed activity values of Al that the thermodynamic properties of the ternary Al-Sn-Zn systems do not change appreciably with temperature across the molar sections.

Słowa kluczowe

EN

molecular interaction volume model; activity; ternary Al-Sn-Zn system; lead-free solder

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2017
• Tom: Vol. 35, No. 3
• Strony: 583--593
• Opis fizyczny: Bibliogr. 42 poz., rys., tab.

Twórcy

autor

Odusote Y. A.

• Department of Physics, School of Sciences, Federal University of Technology, Akure, Nigeria

autor

Popoola A. I.

• Department of Physics, School of Sciences, Federal University of Technology, Akure, Nigeria

autor

Adedayo K. D.

• Department of Physics, School of Sciences, Federal University of Technology, Akure, Nigeria

autor

Ogunjo S. T.

• Department of Physics, School of Sciences, Federal University of Technology, Akure, Nigeria

Bibliografia

• [1] ABTEW M., SELVADURAY G., Mater. Sci. Eng. R, 27 (2000), 95.
• [2] MOELANS N., HARI KUMAR K.C., WOLLANTS P., J. Alloy. Compd., 360 (1) (2003), 98.
• [3] MERRILL J.C., MORTON J.J.P., SOILEAU S.D., Metals, in: HAYERS A.W. (Ed.), Principles and methods of toxicology, CRC Press, 2007.
• [4] HUA F., GLAZER J., Lead-free solders for electronic assembly, design and reliability of solders and solder interconnections, in: MAHIDHARA R.K., FREAR D.R., SASTRY S.M.I., LIAW K.L., WINTERBOTTOM W.L. (Eds.), The minerals, metals and materials society, Orlando, 1997, p. 65.
• [5] GNECCO F., RICCI E., AMORE S., GUIRANNO D., BORZONE G., ZANICCHI G., NOVAKOVIC R., Int. J. Adhes. Adhes., 27 (5) (2007), 409.
• [6] KNOTT S., MIKULA A., Mater. Trans., 43 (8) (2002), 1868.
• [7] LIU X.J., YAMAKI T., OHNUMA I., KAINUMA R., ISHIDA K., Mater. Trans., 45 (3) (2004) 637.
• [8] Official Journal of the European Union, L37 (2003), 19.
• [9] LAURILA V., VUORINEN V., KIVILAHTI J.K., Mater. Sci. Eng. R, 49 (1 - 2) (2005), 1.
• [10] ODUSOTE Y.A., POPOOLA I.A., OLUYAMO S.S., Appl. Phys. A, 122 (2) (2016), 80.
• [11] LEE J., SHIMODA W., TANAKA T., Mater. Trans., 45 (9) (2004), 2864.
• [12] ANUSIONWU B.C., Pramana-J. Phys., 67 (2) (2006), 319.
• [13] NOVAKOVIC R., GIURANNO D., RICCI E., LANATA T., Surf. Sci., 602 (11) (2008), 1957.
• [14] AMORE S., RICCI E., LANATA T., NOVAKOVIC R., J. Alloy. Compd., 452 (2008), 161.
• [15] CHENG S.C., LIN K.L., J. Electron. Mater., 31 (9) (2002), 940.
• [16] KNOTT S., FLANDORFER H., MIKULA A., Z. Metallkd., 96 (1) (2005), 33.
• [17] ODUSOTE Y.A., HUSSAIN, L.A., AWE O.E., J. Non-Cryst. Solids, 353 (11-12) (2007), 1167.
• [18] MURRAY J.L., Bull. Alloy Phase Diag., 4 (1) (1983), 55.
• [19] MEY S.A., EFFENBERG G., Z. Metallkd., 77 (7) (1986), 449.
• [20] MEY S.A., Z. Metallkd., 84 (7) (1993), 451.
• [21] CHEN S.L., CHANG Y.A., CALPHAD, 17 (2) (1993), 113.
• [22] SINGH B.P., KOIRALA R.P., JHA I.S., ADHIKARI D., Appl. Phys. A-Mater., (2015), 1.
• [23] PRASAD L.C., MIKULA A., Physica B, 373 (2006), 64.
• [24] KONG L.X., YANG B., XU B.Q., LI Y.F., HU Y.S., Metall. Mater. Trans. A, 46A (2015), 1205.
• [25] POPESCU C.A., TALOI D., UPB Sci. Bull., 69 (1) (2007), 78.
• [26] ARAGON E., SEBAOUN A., J. Therm. Anal. Calorim., 52 (1998), 523.
• [27] SEBAOUN A., VINCENT D., TREHEUX D., Mater. Sci. Tech.-Lond., 3 (1987), 241.
• [28] LIN K.L., WEN L.H., LIU T.P., J. Electron. Mater., 27 (1998), 97.
• [29] LIN K., LIU T.P., Oxid. Met., 50 (1998), 255.
• [30] FRIES S.G., LUKAS H., KUANG S., EFFENBERG G., Users aspects of phase diagram, in: HAYES F. (Ed.), The Institute of Metals, London, 1991, p. 280.
• [31] PRASAD L.C., MIKULA A., Physica B, 373 (2006), 142.
• [32] CHOU K.C., CALPHAD, 19 (3) (1995), 315.
• [33] HILLERT M., CALPHAD, 4 (1980), 1.
• [34] TERZIEFF P., LI Z., KNOTT S., MIKULA A., Physica B, 388 (1-2) (2007), 312.
• [35] PLEVACHUK Y., SKLYARCHUK V., GERBETH G., ECKERT S., NOVAKOVIC R., Surf. Sci., 605 (11-12) (2011), 1034.
• [36] TAO D.P., Thermochim. Acta, 363 (2000), 105.
• [37] TAO D.P., J. Alloy. Compd., 457 (2008), 124.
• [38] TAO D.P., J. Mater. Sci. Technol., 22 (4) (2006), 559.
• [39] TAO D.P., Thermochim. Acta, 383 (2002), 45-51.
• [40] IIDA T., GUTHRIE R. I.L., The physical properties of liquid metals, Clarendon Press, Oxford, 1993.
• [41] HULTGREN R., DESAI P.D., HAWKINS D.T., GLEISER M., KELLY K.K., Selected values of the thermodynamic properties of binary alloys, American Society for Metals, Metals Park, Ohio, 1973.
• [42] SINGH R.N., SOMMER F., Rep. Prog. Phys., 60 (1997), 57.