Manufacturing of highly ordered porous anodic alumina with conical pore shape and tunable interpore distance in the range of 550 nm to 650 nm

Norek, M.; Łażewski, M.

doi:10.1515/msp-2017-0058

Powiadomienia systemowe

Sesja wygasła!
Sesja wygasła!
Sesja wygasła!

Artykuł - szczegóły

Tytuł artykułu

Manufacturing of highly ordered porous anodic alumina with conical pore shape and tunable interpore distance in the range of 550 nm to 650 nm

Autorzy

Norek M. , Łażewski M.

Wybrane pełne teksty z tego czasopisma

Identyfikatory

DOI

10.1515/msp-2017-0058

Warianty tytułu

Języki publikacji

Abstrakty

In this work, highly ordered porous anodic alumina (PAA) with tapered pore structure and interpore distance (D_c) in the range of 550 nm to 650 nm were fabricated. To produce hexagonal close-packed pore structure a two-step process, combining anodization in etidronic acid electrolyte in the first step and high-concentration, high-temperature anodization in citric acid electrolyte in the second step, was applied. The Al pre-patterned surface obtained in the first anodization was used to produce regular tapered pore arrays by subsequent and alternating anodization in 20 wt.% citric acid solution and pore wall etching in 10 wt.% phosphoric acid solution. The height of the tapered pores was ranging between 2.5 μm and 8.0 μm for the PAA with D_c = 550 nm and D_c = 650 nm, respectively. The geometry of the obtained graded structure can be used for a production of efficient antireflective coatings operating in IR spectral region.

Słowa kluczowe

porous anodic alumina guided anodization citric acid etidronic acid tapered pores AR coatings

Wydawca

De Gruyter

Czasopismo

Materials Science Poland

Rocznik

2017

Tom

Vol. 35, No. 3

Strony

511--518

Opis fizyczny

Bibliogr. 48 poz., rys., tab.

Twórcy

autor

Norek M.

malgorzata.norek@wat.edu.pl

Department of Advanced Materials and Technologies, Faculty of Advanced Technologies and Chemistry, Military University of Technology, 2 Kaliskiego St., 00-908 Warszawa, Poland

autor

Łażewski M.

Department of Advanced Materials and Technologies, Faculty of Advanced Technologies and Chemistry, Military University of Technology, 2 Kaliskiego St., 00-908 Warszawa, Poland

Bibliografia

[1] CHATTOPADHYAY S., HUANG Y.F., JEN Y.J., GANGULY A., CHEN K.H., CHEN L.C., Mater. Sci. Eng. R, 69 (2010), 1.
[2] RAUT H.K., GANESH V.A., NAIR A.S., RAMAKRISHNA S., Energ. Environ. Sci., 4 (2011), 3779.
[3] HOBBS D.S., MACLEOD B.D., Proc. SPIE, 5786 (2005), 349.
[4] FREY B., LEVITON D., MADISON T., Proc. SPIE, 6273 (2006), 62732J.
[5] GULDIN S., KOHN P., STEFIK M., SONG J., DIVITINI G., ECARLA F., DUCATI C., WIESNER U., STEINER U., Nano Lett., 13 (2013), 5329.
[6] JOO W., KIM H.J., KIM J.K., Langmuir, 26 (2010), 5110.
[7] CAMARGO K.C., MICHELS A.F., RODEMBUSCH F.S., HOROWITZ F., Chem. Commun., 48 (2012), 4992.
[8] YILDRIM A., KHUDIYEV T., DAGLAR B., BUDUNOGLU H., OKYAY A.K., BAYINDIR M., ACS Appl. Mater. Inter., 5 (2013), 853.
[9] YANAGISHITA T., NISHIO K., MASUDA H., Appl. Phys. Express, 2 (2009), 022001.
[10] RAUT H.K., DINACHALI S.S., LOKE Y.C., GANESAN R., ANSAH-ANTWI K.K., GÓRA A., KHOO E.H., GANESH V.A., SAIFULLAH M.S.M., RAMAKRISHNA S., ACS Nano, 9 (2015), 1305.
[11] RAUT H.K., DINACHALI S.S., HE A.Y., GANESH V.A., SAIFULLAH M.S.M., LAW J., RAMAKRISHNA S., Energ. Environ. Sci., 6 (2013), 1929.
[12] RAHMAN A., ASHRAF A., XIN H., TONG X., SUTTER P., EISAMAN M.D., BLACK C.T., Nat. Commun., 6 (2015), 5963.
[13] ASADOLLAHBAIK A., BODEN S.A., CHARLTON M.D.B., PAYNE D.N.R., COX S., BAGNALL D.M., Opt. Express, 22 (2014), A402.
[14] CHEN J.Y., CHANG W.-L., HUANG C.K., SUN K.W., Opt. Express, 19 (2011), 14411.
[15] RAGUIN D.H., MORRIS G.M., Appl. Opt., 32 (1993), 1154.
[16] SOUTHWELL W.H., J. Opt. Soc. Am. A, 8 (1991), 549.
[17] GONZALEZ F.L., GORDON M.J., Opt. Express, 22 (2014), 12808.
[18] LI J., ZHU J., GAO X., Small, 10 (2014), 2578.
[19] CAI J., QI L., Mater. Horiz., 2 (2015), 37.
[20] LEE W., LEE J.-K., Adv. Mater., 14 (2002), 1187.
[21] LI J., LI C., GAO X., Appl. Surf. Sci., 257 (2011), 10390.
[22] LI C., LI J., CHEN C., ZHU J., GAO X., Chem. Commun., 48 (2012), 5100.
[23] LI J., LI C., CHEN C., HAO Q., WANG Z., ZHU J., GAO X., ACS Appl. Mater. Inter., 4 (2012), 5678.
[24] SUN B., LI J., JIN X., ZHOU C., HAO Q., GAO X., Electrochim. Acta, 112 (2013), 327.
[25] CHOI K., PARK S.H., SONG Y.M., LEE Y.T., HWANGBO C.K., YANG H., LEE H.S., Adv. Mater., 22 (2010), 3713.
[26] CHOI K., PARK S.H., SONG Y.M., CHOC C., LEE H.S., J. Mater. Chem., 22 (2012), 17037.
[27] KIKUCHI T., NISHINAGA O., NATSUI S., SUZUKI R.O., Electrochim. Acta, 156 (2015), 235.
[28] TAKENAGA A., KIKUCHI T., NATSUI S., SUZUKI R.O., ECS Solid State Lett., 4 (2015), P55.
[29] KIKUCHI T., NISHINAGA O., NATSUI S., SUZUKI R.O., Appl. Surf. Sci., 34 (2015), 119.
[30] KIKUCHI T., NAKAJIMA D., NISHINAGA O., NATSUI S., SUZUKI R.O., Curr. Nanosci., 11 (2015), 560.
[31] HORCAS I., FERNANDEZ R., GOMEZ-RODRIGUEZ J.M., COLCHERO J., GOMEZ-HERRERO J., BARO A.M., Rev. Sci. Instrum., 78 (2007), 013705.
[32] STĘPNIOWSKI W.J., NOWAK-STĘPNIOWSKA A., BOJAR Z., Mater. Charact., 78 (2013), 79.
[33] STĘPNIOWSKI W.J., BOJAR Z., Surf. Coat. Tech., 206 (2011), 265.
[34] STĘPNIOWSKI W.J., ZASADA D., BOJAR Z., Surf. Coat. Tech., 206 (2011), 1416.
[35] SU Z., ZHOU W., JIANGA F., HONG M., J. Mater. Chem., 22 (2012), 535.
[36] KELLER F., HUNTER M.S., ROBINSON D.L., J. Electrochem. Soc., 100 (1953), 411.
[37] EBIHARA K., TAKAHASHI H., NAGAYAMA M., J. Met. Finish. Soc. Jpn., 34 (1983), 548.
[38] PARKHUTIK W.P., SHERSHULSKY V.I., J. Phys. D Appl. Phys., 25 (1992), 1258.
[39] LI F.Y., ZHANG L., METZGER R.M., Chem. Mater., 10 (1998), 2470.
[40] HAN X.Y., SHEN W.Z., J. Electroanal. Chem., 655 (2011), 56.
[41] NOREK M., DOPIERAŁA M., STĘPNIOWSKI W.J., J. Electroanal. Chem., 750 (2015), 79.
[42] CHEN S.H., CHAN D.-S., CHEN C.-K., CHANG T.-H., LAI Y.-H., LEE C.-C., Jpn. J. Appl. Phys., 49 (2010), 015201.
[43] WANG Q., LONG Y., SUN B., J. Porous Mat., 20 (2013), 785.
[44] BELLEMARE J., SIROIS F., MÉNARD D., J. Electrochem. Soc., 161 (2014), E75.
[45] CHEN X., YU D., CAO L., ZHU X., SONG Y., HUANG H., LU L., CHEN X., Mater. Res. Bull., 57 (2014), 116.
[46] COZ LE F., ARURAULT L., DATAS L., Mater. Charact., 61 (2010), 283.
[47] WADA K., SHIMOHIRA T., YAMADA M., BABA N., J. Mater. Sci., 21 (1986), 3810.
[48] BURGHOORN M., ROOSEN-MELSEN D., RIET DE J., SABIK S., VROON Z., YAKIMETS I., BUSKENS P., Materials, 6 (2013), 3710.

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-4b537d29-6fa6-4e02-960d-b91038f4d91f