Ferromagnetic flow of viscous fluid in a slot between fixed surfaces of revolution

• Autorzy: Sawicki J.

Identyfikatory

DOI

10.1515/pomr-2016-0075

• Języki publikacji: EN

Abstrakty

EN

In this paper the steady laminar flow of viscous incompressible ferromagnetic fluid is considered in a slot between fixed surfaces of revolution having a common axis of symmetry. The boundary layer ferromagnetic equations for axial symmetry are expressed in terms of the intrinsic curvilinear orthogonal coordinate system x, θ ,y.The method of perturbation is used to solve the boundary layer equations. As a result, the formulae defining such parameters of the flow as the velocity components vx, vy, and the pressure , were obtained.

Słowa kluczowe

EN

laminar flow; incompressible ferromagnetic fluid; method of perturbation

• Wydawca: Gdańsk University of Technology, Faculty of Ocean Engineering & Ship Technology
• Czasopismo: Polish Maritime Research
• Rocznik: 2016
• Tom: nr 4
• Strony: 99--104
• Opis fizyczny: Bibliogr. 16 poz., rys.

Twórcy

autor

Sawicki J.

• University of Science and Technology in Bydgoszcz Faculty of Mechanical Engineering Department of Applied Mechanics Al. Prof. S. Kaliskiego 7 85-796 Bydgoszcz, Poland

Bibliografia

• 1. Bednarek S.: Ferromagnetic fluids - materials with unusual properties and their applications, 2009, Foton, Institute of Physics, Jagiellonian University, spring 104
• 2. Buhler L.: Magnetohydrodynamic flow in ferromagnetic pipes, Forschungszentrum Karsruhe GmbH, 2002
• 3. Ezekiel F.D.: Ferrolubricants: 1975, New Application, Mechanical Engineering, 2
• 4. Huang W., Wang X.: Ferrofluids lubrication: a status report, 2015, Lubrication Science, 02
• 5. Lemarquand V. , Lemarquan G.: Ferrofluid seals, ,New Tribological Ways, 2011, 04.
• 6. McAlister K. W., Rice W.: Throughflows between rotating surfaces of revolution, having similarity solutions, J. Appl. Mech. Trans. ASME, Series E, 1970, 37, 4
• 7. McAlister K.W., Rice W.: Flows between stationary surfaces of revolution, having similarity solutions, J. Appl. Mech. Trans. ASME, Series E,1972, 39, 2
• 8. Muc A., Barski M.: Magnetorheological fluids and their practical applications, Technical magazine, Cracow University of Technology , 2007, Z1-M
• 9. Nada G.S., Osman T.A.: Journal bearings lubricated by magnetic fluids with couple stresses, Tribology Letters, 2007, 27, 3
• 10. Neuringer J.L., Rosenzweig R.E.: Ferrohydrodynamics, Phys. Fluids, 1964, 7, 12
• 11. Ravaud R., Lemarquand G., Lemarquand V.: Mechanical properties of ferrofluids applications: Centering effect and capacity of a seal, Tribology International , 2010, 01.
• 12. Reinhardt E., Lund W.J. : The influence of fluid inertia on the dynamic properties of journal bearings, J. Lubric. Technol., Trans. ASME, Series F , 1975,, 97, 2
• 13. Safar Z.S., Nada G.S., Osman T.A.: Static and dynamic characteristic of magnetized journal bearing lubricated with ferrofluids, Tribology International , 2001, 02
• 14. Sawicki J.,: Magnetohydromagnetic flow of viscous fluid in a slot between curvilinear surfaces of revolution, Engineering Transactions, PAN-IPPT, 1996, 44 ,1
• 15. Szliomis M.I.: Magnitnyye zhidkosti ( in Russian), Usp., Fiz. Nauk, 1974, 112, 3
• 16. Walicki E. , Sawicki J., Ziejewski M.: Inertia effect in magnetic throughflow fluid in a slot between fixed surfaces of revolution, Mec. Applique, 1978, 23, 6.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.