Structural Properties and Mechanical Behavior of the 2 Step-Reinforced Al-Si/SiCp Metal Matrix Composite by Titanium-Fiber

• Autorzy: Oak J.-J. , Lee Y. C. , Park Y. H.

Identyfikatory

DOI

10.1515/amm-2017-0097

• Języki publikacji: EN

Abstrakty

EN

In this study, the newly designed Al-9Si/SiC particles (SiC_p) + Ti-fiber (2step-reinforced Al-9Si alloy matrix) metal matrix composites (MMCs) were fabricated by hot-pressing sintering at 560°C. 2step-reinforced Al-based MMCs were characterized by thermal shrinkage, phase transition, microstructure and tensile strength. The addition of Ti-fiber reduced thermal shrinkage was caused by temperature difference in sintering process as well as enhanced assistance for tensile strength and plastic deformation at room temperature. Experimental results reveal that the 2step-reinforcment sintering by ceramic and metal has a significant effect to increase interface bonding in boundary of each component material and the improved mechanical properties were due to the influence of interfacial product by diffusion. Tensile strength and elongation at room temperature by 2step-reinforcement were improved in 19.5% and 26.2% more than those of Al-9Si/SiC_p, respectively. Especially, it reveals that diffusion direction may be varied by sintering methods at low temperature in this study.

Słowa kluczowe

EN

metal matrix composite; sintering; Ti fiber; mechanical properties; diffusion

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 2B
• Strony: 1089--1097
• Opis fizyczny: Bibliogr. 29 poz., rys.,tab.

Twórcy

autor

Oak J.-J.

• Material Analysis Laboratory, DAE-IL Corporation, 8, Bonggyenonggong-Gil, Dudong-Myeon, Ulju-Gun, Ulsan 44914, Korea (Republic of)

autor

Lee Y. C.

• Korea Institute of Industrial Technology, Busan, Korea (Republic of)

autor

Park Y. H.

• Department of Materials Science and Engineering, Pusan National University, Busan, Korea (Republic of)

Bibliografia

• [1] W.S. Miller, L. Zhuang, J. Bottema, A. Wittebrood, P. De Smet, A. Haszler, A. Vieregge, Mat. Sci. Eng. A 280, 37 (2000).
• [2] P. Kapranos, D.H. Kirkwood, H.V. Atkinson, J.T. Rheinlander, J.J. Bentzen, P.T. Toft, C.P. Debel, G. Laslaz, L. Maenner, S. Blais, J.M. Rodriguez-Ibabe, L. Lasa, P. Giordano, G. Chiarmetta, A. Giese, J. Mater. Process. Tech. 135, 271 (2003).
• [3] Z.X. Liang, B. Ye, L. Zhang, Q.G. Wang, W.Y. Yang, Q.D. Wang, Mater. Lett. 97, 104 (2013).
• [4] M. Gupta, S. Ling, J. Alloy. Compd. 287, 284 (1999).
• [5] G. Chirita, D. Soares, F S. Silva, Mater. Des. 29, 20 (2008).
• [6] O.E. Sebaie, A.M. Samuel, F.H. Samuel, H.W. Doty, Mat. Sci. Eng. A 480, 342 (2008).
• [7] S. Scudino, G. Liu, M. Sakaliyska, K.B. Surreddi, J. Eckert, Acta Mater. 57, 4529 (2009).
• [8] S.Q. Wu, Z.S. Wei, S.C. Tjong, Compos. Sci. Technol. 60, 2873 (2000).
• [9] G.H. Zhang, J.X. Zhang, B.C. Li, W. Cai, Prog. Nat. Sci. 21, 380 (2011).
• [10] S. Tzamtzis, N.S. Barekar, N. Hari Babu, J. Patel, B.K. Dhindaw, Z. Fan, Compos. Part A-Appl. S. 40, 144 (2009).
• [11] G. Miranda, M. Buciumeanu, S. Madeira, O. Carvalho, D. Soares, F.S. Silva, Compos. Part B-Eng. 74, 153 (2015).
• [12] X.Y. Huang, C.M. Liu, X.J. Lv, G.H. Liu, F.Q. Li, J. Mater. Process. Tech. 211, 1540 (2011).
• [13] A. Arias, R. Zaera, J. López-Puente, C. Navarro, Compos. Struct. 61, 151 (2003).
• [14] S. Naher, D. Brabazon, L. Looney, Compos. Part A-Appl. S. 38, 719 (2007).
• [15] A. Fujiki, Mater. Chem. Phys. 67, 298 (2001).
• [16] D.P. Bishop, J.R. Cahoon, M.C. Chaturvedi, G.J. Kipouros, W.F. Caley, Mater. Sci. Eng. A 290, 16 (2000).
• [17] N. Showaiter, M. Youseffi, Mater. Des. 29, 752 (2008).
• [18] S.S. Su, I.T.H. Chang, W.C.H. Kuo, Mater. Chem. Phys. 139, 775 (2013).
• [19] H.K. Lee, Korean J. Mater. Res. 23, 574 (2013).
• [20] Y. Li, Q. Luo, J.Y. Zhang, Q. Li, in “Light Metals 2013”, p. 391. John Wiley & Sons, Inc., 2013.
• [21] O. Dezellus, B. Gardiola, J. Andrieux, M. Lomello-Tafin, J.C. Viala, J. Phase. Equilib. Diff. 35, 137 (2014).
• [22] X.G. Chen, M. Fortier, J. Mater. Process. Tech. 210, 1780 (2010).
• [23] N. Saheb, T. Laoui, A.R. Daud, M. Harun, S. Radiman, R. Yahaya, Wear 249, 656 (2001).
• [24] M. Zeren, E. Karakulak, J. Alloy. Compd. 450, 255 (2008).
• [25] A.C. Ferro, B. Derby, Acta Metall. Mater. 43, 3061 (1995).
• [26] D. Walter, I.W. Karyasa, J. Chin. Chem. Soc-Taip 52, 873 (2005).
• [27] S. Anand, T.S. Srivatsan, Y. Wu, E.J. Lavernia, J. Mater. Sci. 32, 2835 (1997).
• [28] A. Inoue, Y. Kawamura, H.M. Kimura, H. Mano, Metastable, Mechanically Alloyed and Nanocrystalline Materials, Ismanam-2000, Mater. Sci. Forum 360-3, 129 (2001).
• [29] Q. Luo, Q. Li, J.Y. Zhang, S.L. Chen, K.C. Chou, J. Alloy. Compd. 602, 58 (2014).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)