Influence of the elastomeric coating on parameters of steady state vibrations of coil springs in the resonance and outside it

• Autorzy: Michalczyk K.
• Języki publikacji: EN

Abstrakty

EN

The computational model of steady state vibrations of the coil spring covered with an elastomeric layer under resonance conditions and outside them is presented in the paper. It enables one to assess the reduction effectiveness of dynamic stresses in function of the material and geometrical parameters of the applied coating. The considerations are supplemented with the numerical examples.

Słowa kluczowe

EN

helical springs vibrations; coil springs; dynamic stresses; damping

• Wydawca: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
• Czasopismo: Journal of Theoretical and Applied Mechanics
• Rocznik: 2014
• Tom: Vol. 52 nr 2
• Strony: 507--518
• Opis fizyczny: Bibliogr. 29 poz., rys.

Twórcy

autor

Michalczyk K.

• AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, Krakow, Poland

Bibliografia

• 1. Abdelmouleh M., Boufi S., Belgacem M.N., Dufresne A., 2007, Short natural-fibre reinforced polyethylene and natural rubber composites: Effect of silane coupling agents and fibr es loading, Composites Science and Technology, 67, 1627-1639
• 2. Boschi A., 1961, Antivibration Washer for Helical Spring Suspensions, US 3051469A1
• 3. Branowski B., 1997, Sprężyny metalowe, PWN, Warszawa
• 4. Clark H.H., 1961, Stranded-Wire Helical Springs, Spring Design and Application, McGraw-Hill Book Company, New York, USA
• 5. Costello G.A., Phillips J.W., 1979, Static response of stranded-wire helical springs, International Journal of Mechanical Sciences, 21, 171-178
• 6. Dickhart III W.W., Herring J.J.M., 1985, Zwischen dem Wagenkasten eines Eisenbahnwagens und einem Drehgestell Angeordnete Mechanische Schraubenfeder, DE 3529477A1
• 7. FIAT – Bollettino Tecnico 1962/3, Alcun note su un caso particolare di vibrazione delle molle
• 8. Flenker Ch., Uphoff U., 2005, Efficient valve-spring modelling with MBS valve-train design, MTZ, 66, 12
• 9. Giergiel J., 2000, Drgania mechaniczne, Wydawnictwa AGH, Krakow, p. 397
• 10. Krużelecki J., 1990, Optimal design of helical springs, Mechanika Teoretyczna i Stosowana, 28, 1/2, 109-114
• 11. Lipiński J., 1985, Machines Foundations, Arkady, Warszawa, p. 33
• 12. Liu H., Kim D., 2009, Effects of end coils on the natural frequency of automotive engine Valle springs, International Journal of Automotive Technology, 10, 4, 413-42
• 13. Mayers W.T., 1985, Helical Coil Damper Assemblies, US 4538563A1
• 14. Michalczyk K., 2012, The analysis of damping properties of helical spring shock – absorbing holder, Przegląd Mechaniczny, 5, 21-24
• 15. Michalczyk K., 2013, Analysis of the influence of elastomeric layer on helical spring on its resonant dynamic stresses, caused by its longitudinal vibrations, Archives of Civil and Mechanical Engineering, XIII, 1, 21-26
• 16. Michalczyk K., Lepiarczyk D., 2011, Analysis of new construction of amortized handle of coil springs, Przegląd Mechaniczny, 70, 4, 29-32
• 17. Michalczyk J., Majkut L., 2003, Analysis of wave effects in complex vibration isolation systems, Archive of Mechanical Engineering, L, 363-385
• 18. Michalczyk J., Michalczyk K., 2009, Coil Spring Clamp with the Shock Absorber, Polish Patent No. PL 387894A1
• 19. Michalczyk K., Salwiński J., 2011, Influence of Mounting Way of Helical Compression Spring on its Certain Operating Features (in Polish), Wydawnictwa AGH, Krakow, p. 72
• 20. Muhr T.H., 1993, New technologies for engine valve springs, SAE Paper 930912, New Engine Design and Engine Component Technology, SAE SP-972, 199-208
• 21. Muzio C., 1998, Coated Coil Spring, Particularly for Automotive Suspensions, EP0 878637A2
• 22. Nishiyama M., Umetsu C., Kebukawa A., Andoh M., 1988, Coated Coil Spring, US 4763882
• 23. Nix S., 2001, Schubfeder, DE 10104936A1
• 24. Pietra L.D, Valle S.D., 1982, On the dynamic behavior of axially excited helical springs, Meccanica, 17, 1, 31-43
• 25. Shulgin N.M., Sjemionov G.A., 1985, Ustroistvo dlya kreplenia cilindricheskoi vintovi puzhiny, SU 12640539A1
• 26. Solecki R., Szymkiewicz J., 1964, Układy prętowe i powierzchniowe, obliczenia dynamiczne, Arkady, Warszawa, p. 65
• 27. Wittrick W.H., 1966, On elastic wave propagation in helical springs, International Journal of Mechanical Science, 8, 25-47
• 28. Yang O., Engel P., Prasad B.G.S., Woollatt D., 1966, Dynamic response of compressor valve springs to impact loading, International Compressor Engineering Conference, Paper 1131
• 29. Żukowski S., 1955, Sprężyny, PWT, Warszawa, p. 286