Water absorption behavior and its effect on Charpy impact test of jute yarn reinforced polyester composites

• Autorzy: Djeghader Djamel , Redjel Bachir
• Języki publikacji: EN

Abstrakty

EN

Plates of bidirectional jute/polyester composite material were manufactured by the contact molding method. These plates were cut to form notched test pieces 80x15x4 mm and immersed in water (1, 10, 30, 90, 180 and 270 days) in order to study the impact behavior of this material. The studied composite exhibited a water saturation limit after an immersion period of approximately 30 days, with Fickian diffusion of water within the material. Williams’ method based on linear elastic fracture mechanics was used to calculate impact toughness GIC, which is due to the intrinsic characteristics of the material.

Słowa kluczowe

EN

jute; polyester; absorption; Charpy impact test; immersion; diffusion

PL

juta; poliester; absorpcja; próba udarowa Charpy'ego; zanurzenie; dyfuzja

• Wydawca: Polskie Towarzystwo Materiałów Kompozytowych
• Czasopismo: Composites Theory and Practice
• Rocznik: 2022
• Tom: R. 22, nr 2
• Strony: 65--71
• Opis fizyczny: Bibliogr. 36 poz., rys., tab.

Twórcy

autor

Djeghader Djamel

• Abdel Hafid Boussouf University Center, Technical Sciences Department, Mila, 43000, Algeria

autor

Redjel Bachir

• Badji Mokhtar University, Civil Engineering Department, Annaba, 23000, Algeria

Bibliografia

• [1] Donald V.R., Dominick V.R., Reinforced Plastics, third ed., Elsevier Advanced Technology 2004.
• [2] Alam M.K., Khan M.A., Comparative study of water absorption behavior in Biopol and jute-reinforced biopol composite using neutron radiography technique, Reinf. Plast. Compos. 2006, August, 25, 11, 1179-1187, DOI: 10.1177/0731684406066365.
• [3] Roudier A., Analyse multi-échelle du comportement hygro-mécanique des fibres de lin. PHD Thesis, Université Blaise Pascal, Clermont-Ferrand II, France, 2012.
• [4] Weitsman Y.J., Fluid Effects in Polymers and Polymeric Composites, Mechanical Engineering Series, Springer US, Boston, MA, 2012.
• [5] Pascaut J.P., Sautereau H., Verdu J., Williams R.J., Thermosetting Polymers, first ed., CRC Press, 2002.
• [6] Akil H.M., Cheng L.W., MohdIshak Z.A., Abu Bakar A., AbdRahman M.A., Water absorption study onpultruded jute fibre reinforced unsaturated polyester composites, Compos. Sci. Technol. 2009, September, 11-12, 1942-1948, DOI: 10.1016/j.compscitech.2009.04.014.
• [7] Sen I., Aral A., Seki Y., Sarikanat M., Sever K., Variations of mechanical properties of jute/polyester composite aged in various media, J. Compos. Mater. 2012, January, 18, 2219-2225, DOI: 10.1177/0021998311430866.
• [8] Dhakal H.N., Zhang Z.Y., Mow R., Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Compos. Sci. Technol. 2007, June, 7-8, 1674-1683, DOI: 10.1016/j.compscitech.2006.06.019.
• [9] Aggarwal P.K., Raghu N., Karmarkar A., Chuahan S., Jute – polypropylene composites using m-TMI – grafted – polypropylene as a coupling agent, Mater. Des. 2013, 43, 112-117, DOI: 10.1016/j.matdes.2012.06.026.
• [10] Dittember D.D., GangaRao H.V.S., Critical review of recent publications on use of natural composites in infrastructure, Compos. Part A Appl. Sci. Manuf. 2012, August, 8, 1419-1429, DOI: 10.1016/j.compositesa.2011.11.019.
• [11] Alamri H., Low I.M., Effect of water absorption on the mechanical properties of nano clay filled recycled cellulose fibre reinforced epoxy hybrid nano composites. Compos. Part A Appl. Sci. Manuf. 2013, January, 44, 23-31, DOI: 10.1016/j.compositesa.2012.08.026.
• [12] Salleh Z., Taib Y.M., Hyie K.M., Mihat M., Berhan M.N., Ghani M.A.A., Fracture toughness investigation on long kenaf/woven glass hybrid composite due to water absorption effect, Procedia Eng. 2012, 41, 1667-1673, DOI: 10.1016/j.proeng.2012.07.366.
• [13] Hossain M.K., Dewan M.W., Hosur M., Jeelani S., Mechanical performances of surface modified jute fiber reinforced biopolnanophased green composites, Compos. B. Eng. 2011, 42, 1701-1707, DOI: 10.1016/j.compositesb.2011.03.010.
• [14] Athijayamania A., Thiruchitrambalam M., Natarajana U., Pazhanivelc B., Effect of moisture absorption on the mechanical properties of randomly oriented natural fibers/polyester hybrid composite, Mater. Sci. Eng. A, 2009, August, 1-2, 344-353, DOI: 10.1016/j.msea.2009.04.027.
• [15] Djeghader D., Redjel B., Effect of water absorption on the Weibull distribution of fatigue test in jute-reinforced polyester composite materials, Adv. Compos. Lett. 2019, May, 28, 1-11, DOI: 10.1177/0963693519853833.
• [16] Severson P., Analysis of Multi-Directional Recycled Jute Fiber Composite Behavior Using Experimental, Numerical, and Analytical Methods. Thesis of Master of Science in Engineering, University of Wisconsin, Milwaukee 2012.
• [17] Biswas S., Ahsan Q., Verpoest I., Hasan M., Effect of span length on the tensile properties of natural fibers, Adv. Mat. Res. 2011, June, 264-265, 445-450, DOI: 10.4028/www. scientific.net/AMR.264-265.445.
• [18] Gierszewska-Drużyńska M., Ostrowska-Czubenko J., Mechanism of water diffusion into non-crosslinked and ionically crosslinked chitosan membranes, Prog. Chem. Appl. Chitin. Deriv. 2012, 17, 63-70.
• [19] Chun K.S., Husseinsyah S., Yeng C.M., Effect of green coupling agent from waste oil fatty acid on the properties of polypropylene/cocoapod husk composites, Polym. Bull, 2016, April, 73, 3465-3484, DOI: 10.1007/s00289-016-1682-7.
• [20] Wang W., Sain M., Cooper P.A., Study of moisture absorption in natural fibre composites, Compos. Sci. Technol. 2006, March, 3-4, 379-386, DOI: 10.1016/j.compscitech.2005.07.027.
• [21] Carter H.G., Kibler K.G., Langmuir-type model for anomalous moisture diffusion in composite resins, J. Compos. Mater. 1978, July, 2, 118-131, DOI: 10.1177/002199837801200201.
• [22] William M.B., Dumolin F., Hayward D., Pethrick A., Li Z.C., Non-destructive examination of composite joint structures: a correlation of water absorption and high-frequency dielectric propagation, J. Phys. D., 1996, 29, 233-239.
• [23] Turner C.E., Fracture toughness and specific fracture energy: A re-analysis of results, Mater. Sci. Eng. 1973, May, 5, 275-282, DOI: 10.1016/0025-5416(73)90092-X.
• [24] Plati E., Williams J.G., The determination of fracture parameters in impact, Polym. Eng. Sci. 1975, June, 15, 470-477, DOI: 10.1002/pen.760150611
• [25] Redjel B., De Charentenay F.X., Résistance au choc des matériaux composites SMC à base de résinephénolique Journal de physique IV, Colloque C3, Suppl. au Journal de Physique III 1991, V. 1, 297-304.
• [26] Pierron F., Poirette Y., Vautrin A., A novel procedure for identification of 3D moisture diffusion parameters on thick composites: Theory, validation and experimental results, J. Compos. Mater. 2002, 36, 2219-2243, DOI: 10.1177/0021998302036019003.
• [27] George J., Bhagawan S.S., Thomas S., Effects of environment on the properties of low-density polyethylene composites reinforced with pineapple-leaf fibre, Compos. Sci. Technol. 1998, September, 9, 1471-1485, DOI: 10.1016/S0266-3538(97)00161-9.
• [28] Kushwaha P.K., Kumar R., Studies on water absorption of bamboo-polyester composites: Effect of silane treatment of mercerized bamboo, Polym. Plast. Technol. Eng. 2009, October, 49, 45-52, DOI: 10.1080/03602550903283026.
• [29] Ehi I.P., Bidemi J.K., Yahaya L.E., Kinetic studies on water absorption properties of cocoa-pod epoxy composites, Iranica Journal of Energy and Environment, 2016, 7, 48-51, DOI: 10.5829/idosi.ijee.2016.07.01.07
• [30] Karaduman Y., Onal L., Water absorption behavior of carpet waste jute-reinforced polymer composites, J. Compos. Mater. 2010, December, 15, 1559-1571, DOI: 10.1177/0021998310385021.
• [31] Toubal L., Zitoune R., Collombet F., Gleizes N., Moisture effects on the material properties of a jute/epoxy laminate: impulse excitation technique contribution, J. Nat. Fibers 2017, May, 15, 39-52, DOI: 10.1080/15440478.2017.1302389.
• [32] Marcovich N.E., Reboredo M.M., Aranguren M.I., Moisture diffusion in polyester-woodflour composites, Polym. 1999, December, 26, 7373-7320, DOI: 10.1016/S0032-3861(99)00093-2.
• [33] Stevulova N., Cigasova J., Purcz P., Schwarzova I., Kacik F., Geffert A., Water absorption behavior of hemp hurds composites, Mater. 2015, May, 8(5), 2243-2257, DOI: 10.3390/ma8052243.
• [34] Privas E., Matériauxligno-cellulosiques: Elaboration et caractérisation, PHD Thesis, Ecole Nationale Supérieure des Mines de Paris, France, 2013.
• [35] Mahmud S., Hasan K.M.F., Jahid M.A., Mohiuddin K., Zhang R., Zhu J., Comprehensive review on plant fiber-reinforced polymeric biocomposites, J. Mater. Sci. 2021, January, 56, 7231-7264, DOI: 10.1007/s10853-021-05774-9.
• [36] Bismark A., Askargorta I.A., Springer J., Surface characterization of flax, hemp and cellulose fibers; Surface properties and the water uptake behavior, Polym. Compos. 2002, April, 23, 872-894, DOI: 10.1002/pc.10485.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).