Influence of Lay Plan Solution in Fabric Efficiency and Consume in Cutting Section

• Autorzy: Dumishllari E. , Guxho G.

Identyfikatory

DOI

https://doi.org/10.1515/aut-2015-0055

• Języki publikacji: EN

Abstrakty

EN

One cutting order may require several lies and markers to achieve optimal efficiency and selection of right Lay Plan is one of the major challenges in cutting section, in a way to lead in fabric economy and reduced costs. The main purpose of this paper is to determine the best solution of lay plan and its influence, in the cutting room, starting from the analysis of the lay indicators calculations. We have studied an order with 200 jackets, with specific sizes. Markers are made by Gemini CAD (Gemini Cut Plan and Gemini Nest Expert). From Gemini CAD, we have taken different solutions of lay plans and chose the three best of them (lay plans that have a smaller number of lies, plies etc.), and then, for three best solutions are calculated lay indicators. From this calculation, we have determined the best solution of lay plan. The order to study has 5 different fabrics, so the calculations are made for each of them, and in the end are combined, in a way to have conclusions for an order in general. Best solution of lay plans combination, resulted one which had a better weighted efficiency and a low lay consumption.

Słowa kluczowe

EN

lay plan; marker; fabric; efficiency; plies

PL

znacznik; tkanina; wydajność; warstwy

• Wydawca: Lodz University of Technology, Faculty of Material Technologies and Textile Design
• Czasopismo: Autex Research Journal
• Rocznik: 2016
• Tom: Vol. 16, no. 4
• Strony: 222--227
• Opis fizyczny: Bibliogr. 15 poz.

Twórcy

autor

Dumishllari E.

• Department of Textile and Fashion, Polytechnic University of Tirana, Albania

autor

Guxho G.

• Department of Textile and Fashion, Polytechnic University of Tirana, Albania

Bibliografia

• [1] A Puri. 2013. Efficacy of Pattern Making Software in Product Development.
• [2] Assignmentpoint. Fabric Spreading and Cutting Section of Garments Industry. Retrieved Dec 2014, from Assignmentpoint: http://www.assignmentpoint.com/science/textile/fabric-spreading-and-cutting-section-of-garments-industry.html
• [3] CHAN SIU HO. 1999. A study of fabric loss during spreading.
• [4] David J. Tyler. 2008. Carr and Latham’s Technology of Clothing Manufacture. Blackwell.
• [5] Fashion Incubator. What is a marker? Retrieved November 2014, from Fashion Incubator: http://www.fashion-incubator.com/archive/what-is-a-marker/
• [6] Gemini CAD SYSTEMS. 2010. Gemini Cut Plan User manual rev X9. Pg 2.
• [7] Kahn, Cohen and Soto. 5/18/2005. The Fashion Manufacturing Process A Product Development Approach.
• [8] Khush boo Priyambada, Feb 2014. Apparel Production Overview.
• [9] Kurt Salmon. 2012. Excellence in Global Sourcing.
• [10] Mausmi A. 2013. Fabric Utilization, Cut Order Planning.
• [11] Ondogan Z, Erdogan C. 2006. The Comparison of the Manual and CAD Systems for Pattern Making, Grading and Marker Making Processes.
• [12] P Lakshmanakanth. 2012. Spreading and Cutting of Apparel Products.
• [13] Prabir Jane. StitchWorld. 2008. Cut Order Planning – The Dot Com Way.
• [14] Ruth E. Glock. Grance I, Kunz. 2005. Apparel Manufacturing Sewn Product Analysis, Fourth Edition. Pg 395. PEARSON Prentice Hall, New Jersey.
• [15] Wong. W, Leung. S.Y. S. 2009. A Hybrid Planning for Improving Fabric Utilization.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.