PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Investigation of waste heat recovery for automobile application based on a thermoelectric module

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The article presents a brief discussion about issues of energy harvesting of waste heat generated during the operation of the SI (spark ignition) internal combustion engine (ICE). The available methods of implementation and the problems associated with them were presented. In recent years, there has been an increase in the significance of successful researches on new types of thermoelectric modules. Despite relatively low efficiency of the thermoelectric modules, a systematic growth in their interest is observed. Their application seems to be reasonable because of many advantages - mainly the simplicity. The paper contains the literature review in the subject of interest. For the purpose of this work, a test rig was designed and manufactured. The test rig consists of a single thermoelectric module and makes it possible to work in variety of operating conditions for different values of the exhaust gas flow rate and temperature. It is equipped with an automatic, servo controlled, movable element, which control direction of the exhaust gas flow and as a result changes the heat flux transferred via the thermoelectric module. This solution allows achieving the maximum power of the thermoelectric module in a wide range of ICE operating conditions and also allows adjusting operating parameters to actual working conditions of the whole system. The problems encountered during the construction of the test rig and the proposed solutions of practical implementation were described. Experimental research was conducted on a small size automobile petrol engine. The influence of electrical parameters at the output on the whole system was analysed. The results suggest that the actual thermoelectric module parameters, especially the thermal conductivity, vary from declared by the producer. Maximum achieved electric power output reached about 10 W from a single thermoelectric module (57 mm x 54 mm), which is nearly half of the declared value.
Twórcy
autor
  • Silesian University of Technology Faculty of Energy and Environmental Engineering Konarskiego Street 18, 44-100 Gliwice, Poland
  • Silesian University of Technology Faculty of Energy and Environmental Engineering Konarskiego Street 18, 44-100 Gliwice, Poland
autor
  • Silesian University of Technology Institute of Thermal Technology Faculty of Energy and Environmental Engineering Konarskiego Street 18, 44-100 Gliwice, Poland
autor
  • Silesian University of Technology Institute of Power Engineering and Turbomachinery Konarskiego Street 18, 44-100 Gliwice, Poland tel.: +48 32 2372822, fax: +48 32 2372680
Bibliografia
  • [1] Arsie, I., Cricchio, A., Pianese, C., De Cesare, M., Ricciardi, V., Modeling analysis of waste heat recovery via thermo-electric generator and electric turbo-compound for CO2 reduction in automotive SI engines, Energy Procedia, Vol. 82, pp. 81-88, 2015.
  • [2] Baatar, N., Kim, S., A thermoelectric generator replacing radiator for internal combustion engine vehicles, Telekomnika, Vol. 9, No. 3, pp. 523-530, 2011.
  • [3] BMW Turbosteamer technology details: access online: https://www.press.bmwgroup.com/ global/article/detail/T0119738EN/.
  • [4] Espinosa, N., Lazard, M., Aixala, L., Scherrer, H., Modeling a thermoelectric generator applied to diesel automotive heat recovery, Journal of Electronic Materials, Vol. 39, No. 9, pp. 1446-1455, 2010.
  • [5] Gabriel-Buenaventura, A., Azzopardi, B,. Energy recovery systems for retrofitting in internal combustion engine vehicles: A review of techniques, Renewable and Sustainable Energy Reviews, Vol. 41, pp. 955-964, 2015.
  • [6] Izidoro, C. L., Ando Junior, O. H., Carmo, J. P., Schaeffer, L., Characterization of thermoelectric generator for energy harvesting, Measurement, http://dx.doi.org/10.1016/j.measurement.2016. 01.010, 2016.
  • [7] Karvonen, M., Kapoor, R., Uusitalo, A., Ojanen, V., Technology competition in the internal combustion engine waste heat recovery: a patent landscape analysis, Journal of Cleaner Production, Vol. 112, pp. 3735-3743, 2016.
  • [8] Kempf, N., Zhang, Y., Design and optimization of automotive thermoelectric generators for maximum fuel efficiency improvement, Energy Conversion and Management, Vol. 121, pp. 224-231, 2016.
  • [9] Lineykin, S., Ben-Yaakov, S., Modeling and analysis of thermoelectric modules, IEEE Transactions on Industry Applications, Vol. 43, No. 2, pp. 505-512, 2007.
  • [10] Liu, X., Deng, Y.D., Chen, S., Wang, W.S., Xu, Y., Su, C.Q., A case study on compatibility of automotive exhaust thermoelectric generation system, catalytic converter and muffler, Case Studies in Thermal Engineering, Vol. 2, pp. 62-66, 2014.
  • [11] Liu, X., Deng, Y.D., Zhang, K., Xu, M., Xu, Y., Su, C.Q., Experiments and simulations on heat exchangers in thermoelectric generator for automotive application, Applied Thermal Engineering, Vol. 71, pp. 364-370, 2014.
  • [12] Liu, X., Li, C., Deng, Y.D., Su, C.Q., An energy-harvesting system using thermoelectric power generation for automotive application, Electrical Power and Energy Systems, Vol. 67, pp. 510-516, 2015.
  • [13] Martins, J., Brito, F.P., Gonclaves, L.M., Antunes, J., Thermoelectric exhaust energy recovery with temperature control through heat pipes, SAE 2011 World Congress, 2011-01-0315, Detroit, Michigan, USA.
  • [14] Meng, J., Wang, X., Chen, W., Performance investigation and design optimization of a thermo-electric generator applied in automobile exhaust waste heat recovery, Energy Conversion and Management, Vol. 120, pp. 71-80, 2016.
  • [15] Niu, Z., Diao, H., Yu, S., Jiao, K., Du, Q., Shu, G., Investigation and design optimization of exhaust-based thermoelectric generator system for internal combustion engine, Energy Conversion and Management, Vol. 85, pp. 85-101, 2014
  • [16] Rowe, D. M., Min, G., Evaluation of thermoelectric modules for power generation, Journal of Power Sources, Vol. 73, pp. 193-198, 1998.
  • [17] Saidur, R., Rezaei, M., Muzammil, W.K., Hassan, M.H., Paria, S., Hasanuzzaman, M., Technologies to recover exhaust heat from internal combustion engines, Renewable and Sustainable Energy Reviews, Vol. 16, pp. 5649-5659, 2012.
  • [18] Saqr, K.M., Mansour, M.K., Musa, M.N., Thermal design of automobile exhaust based thermoelectric generators: objectives and challenges, International Journal of Automotive Technology, Vol. 9, No. 2, pp. 155-160, 2008.
  • [19] Su, C.Q., Wang, W.S., Liu, X., Deng, Y.D., Simulation and experimental study on thermal optimization of the heat exchanger for automotive exhaust-based thermoelectric generators, Case Studies in Thermal Engineering Vol. 4, pp. 85-91, 2014.
  • [20] Temizer, İ., İlkılıç, C., The performance and analysis of the thermoelectric generator system used in diesel engines, Renewable and Sustainable Energy Reviews, Vol. 63, pp. 141-151, 2016.
  • [21] Thermoelectric generator module GM250-449-10-12, Product Detail, access online: http://www. europeanthermodynamics.com
  • [22] Weng, C., Huang, M., A simulation study of automotive waste heat recovery using a thermo-electric power generator, International Journal of Thermal Sciences, Vol. 71, pp. 302-309, 2013.
  • [23] Zhang, Y., Joshi, G., Cleary, M., Meda, L., Wang, X., Kempf, N., Schoensee, N., Yang, J., High-temperature and high-power-density nanostructured thermoelectric generator for automotive waste heat recovery, Energy Conversion and Management, Vol. 105, pp. 946-950, 2015.
  • [24] Zhu, S., Deng, K., Qu, S., Thermodynamic analysis of an in-cylinder waste heat recovery system for internal combustion engines, Energy, Vol. 67, pp. 548-556, 2014.
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-49d52f7e-cda6-499d-8bae-a26f6bdf6417
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.