Ciśnienie i docisk oraz szerokość strefy kontaktu między cylindrami i wałkami w drukującej maszynie offsetowej – przegląd literatury

Jurkiewicz, A.; Pyr'yev, Y.

Artykuł - szczegóły

Tytuł artykułu

Ciśnienie i docisk oraz szerokość strefy kontaktu między cylindrami i wałkami w drukującej maszynie offsetowej – przegląd literatury

Autorzy

Jurkiewicz A. , Pyr'yev Y.

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

Warianty tytułu

Pressure, press clamping and width of a contact zone between cylinders and rollers in an offset printing machine – review of the printing literature

Języki publikacji

Abstrakty

The printing literature provides different values of pressure between cylinders in the printing unit and between rollers in the ink unit of the offset printing machine. Very often there is no information on whether a given value of pressure is maximum or average. Another frequent problem referred to in the printing literature is that authors do not reveal the source of theorems, equations or other important information. This article includes a set of values collected for pressure, line pressure, press clamping and the contact zone width that have been presented by other authors in their specific articles and books. It also includes definitions of pressure, line pressure, press clamping, indentation of blanket and metric clamping. In addition, the article briefly presents findings of the experimental research related to the contact zone between cylinders and rollers was carried out in the printing unit and in the ink unit until present. This article also gives publication references which provide for different equations concerned with the clamping force of cylinders, their compression or indentation, the contact zone width and the impact the specific stress-strain has on blankets.

Słowa kluczowe

drukowanie offsetowe maszyna offsetowa nacisk strefa kontaktu

offset printing offset printing machine pressure press clamping contact zone

Wydawca

Centralny Ośrodek Badawczo-Rozwojowy Przemysłu Poligraficznego

Czasopismo

Acta Poligraphica

Rocznik

2016

Tom

Vol. 8

Strony

9--27

Opis fizyczny

Bibliogr. 66 poz.

Twórcy

autor

Jurkiewicz A.

Politechnika Warszawska

autor

Pyr'yev Y.

Politechnika Warszawska

Bibliografia

1. Behnke R., Bridges V., Flint W., Byers J., Method of making a printing blanket with a convex compressible layer, 1999, US Patent 5,863,367, URL https://www.google.com/patents/US5863367.
2. Bohan M., Claypole T., Gethin D., Megat Ahmed M., A model for ink impression in printing contacts, „Journal of pulp and paper science” 2000, nr 26 (11), s. 414–419.
3. Bohan M., Lim C., Korochkina T., Claypole T., Gethin D., Roylance B., An investigation of the hydrodynamic and mechanical behaviour of a soft nip rolling contact, Proceedings of the Institution of Mechanical Engineers, Part J, „Journal of Engineering Tribology 1997”, nr 211 (1), s. 37–49.
4. Ciupalski S., Maszyny offsetowe zwojowe, Warszawa 2000.
5. Ciupalski S., Maszyny drukujące konwencjonalne, Warszawa 2001.
6. Coupe R., Hsu B., Penetration of varnishes and inks into paper under pressure, „JOCCA” 1960, nr 43 (10), s. 720–736.
7. Czichon H., Czichon M., Offsetowe gumy obciągowe, „Świat Druku” 1998, nr 1.
8. Čechman Ja. I., Senkus’ V. T., Didyč V. P., Bosak V.O., Drukars’ke ustatkuvannja. Pidručnyk, Lwów 2005.
9. De Grace J., Mangin P., A mechanistic approach to ink transfer. part i: Effect of substrate properties and press conditions, „Advances in Printing Science and Technology” 1984, nr 17.
10. De Grace J., Mangin P., A mechanistic approach to ink transfer. part 2-the splitting behaviour of inks in printing nips, „Advances in Printing Science and Technology” 1988, nr 21.
11. De Paoli A., The effect of printing conditions on dot gain, „TAGA Journal of Graphic Technology” 1981.
12. Dejidas L. P., Destree T., Technologia offsetowego drukowania arkuszowego, Warszawa 2007.
13. Destree T., Zak J., Trudności w arkuszowym drukowaniu offsetowym. Poradnik, Warszawa 2007.
14. Eriksen O., Gregersen O.W., Ink pigment location measured as the position of clay in yellow coldset ink, „Nordic Pulp and Paper Research Journal” 2006, nr 21 (4), s. 460.
15. Eschenbach W., Wagenbauer K., Impression forces and pressure distribution in the cylinder contact areas of a sheet offset printing press, Proceeding of the Fifth International Conference of Printing Research Institutes, Pergumm Press, New York, 109–127, 1961.
16. Franklin A.T., Paper/ink/press relationships, „Professional Printer” 1980, nr 24 (2), s. 2–5.
17. George H., Oppenheimer R., Deflection compensating roll for providing uniform contact pressure, 1984, US Patent 4,487,122, URL https://www.google.com/patents/US4487122.html.
18. Germanies E., Sprawočnaja kniga technologa poligrafista, Moskwa 1982.
19. Goossen C., Peterson S., Compressible printing blanket, 1976, uS Patent 3,983,287, URL http://www.google.com/patents/US3983287.
20. Henry H., Ink distributing means comprising a bundle of skewed rollers, 1972, US Patent 3,687,073, URL https://www.google.com/patents/US3687073.
21. Hermanies E. (red.), Polygrafische Technik, Leipzig 1978.
22. Hinge K., Maniatty A., The effect of skew angle on the axial pressure distribution between flexible rubber-covered rollers, „International journal of mechanical sciences”1995, nr 38 (6), s. 607–619.
23. Hoffmann E., Sameit C., Schmid G., Method and printing unit for influencing lateral web spreading in particular in rotary presses, 2006, US Patent 7,127,991, URL https://www.google.com/patents/US7127991.
24. Hsu B., Some observations on the ink-paper relationship during printing, Printing, Packaging & Allied Trades Research Association, 1961.
25. Jarema S. M., Mechanika kontaktnoji vzaemodiji frykcijnych par kočennja poligrafičnych system (Mechanics of contact interaction of pairs of rolling friction of printing systems), Kijów 2006.
26. Jurkiewicz A., Pyr’yev Y., Analiza nacisków pomiędzy wałkami w arkuszowej offsetowej maszynie drukującej, „Opakowanie” 2011, nr 3.
27. Jurkiewicz A., Pyr’yev Y., Analysis of stress problem between two rollers or two cylinders in sheet-fed offset printing machine, „Acta Mechanica et Automatica” 2011, nr 5 (4), s. 58–61.
28. Jurkiewicz A., Pyr’yev Y., Analysis of pressure force between two cylinders, „Challenges of Modern Technology” 2012, nr 3 (1), 10–14.
29. Jurkiewicz A., Pyr’yev Y., The change of printouts’ quality depending on pressure of a blanket cylinder against an impression cylinder and a plate cylinder in offset machine, „Acta Mechanica et Automatica” 2014, nr 8 (1), s. 9–15.
30. Jurkiewicz A., Pyr’yev Y., Kowalczyk J., Printouts’ quality depending on too small pressure of a blanket cylinder against an impression cylinder and a plate cylinder in offset machine, „Challenges of Modern Technology” 2013, nr 4 (4).
31. Jurkiewicz A., Pyr’yev Y., Kowalczyk J., Wpływ zbyt małego nacisku pomiędzy cylindrem pośrednim i jednocześnie cylindrem formowym i dociskowym w maszynie offsetowej na jakość wydruków, [w:] Wyzwania współczesnej techniki, s. 63–74, Warszawa 2014.
32. Kasjanova E. L. Osnovnye vidy pečati. Učebnoe posobie, Novosibirsk 2012.
33. Kipphan H. (red.), Handbook of print media, Berlin Heidelberg 2001.
34. Kozarovickij L., Bumaga i kraska v processe pečatanija, Moskwa, 1965.
35. Kubert V., Automatic cylinder skewing apparatus, 1982, US Patent 4,365,552, URL https://www.google.com/patents/US4365552.
36. Nordman Lars S., Rolf Ginman R., Olofsson G., Eravuo V., Piezoelectric measurement of printing pressure, „TAGA Journal of Graphic Technology” 1959.
37. Lim C. H., Bohan M. F. J., Claypole T.C., Gethin D.T., Roylance B. J.,A finite element investigation into a soft rolling contact supplied by a non-newtonian ink, „Journal of Physics D: Applied Physics” 1996, nr 29 (7).
38. Marogulowa N., Stefanow S., Raschodnye materialy dla offsetnoj pečati, Ruskij uniwersitet, Moskwa 2002.
39. Mcguire C., Pneumatic cellular structure, 1950, US Patent 2,503,164, URL http://www.google.com/patents/US2503164.
40. Miloševic R., Kašikovic N., Novakovic D., Prica M., Draganov S., Investigation of the printing pressure level application influence on sheet-fed offset print quality, „Machine Design” 2013, nr 5 (4), s. 171–176.
41. Miloševic R., Kašikovic N., Novakovic D., Prica M., Draganov S., The effects of different printing pressure level application on sheet-fed offset print quality, International „Circular of Graphic Education and Research” 2014, nr 7, s. 54–65.
42. Mitrofanov V., Analitičeskaja statika pečatnogo processa, „Izwiestija wyższych uczebnych zawiedienij. Problemy poligrafii i izdatielskogo dieła” 2000, nr 1–2, s. 5–10.
43. Oittinen P., Lindqvist U., The behavior of printing ink in an offset printing nip, „Paperi ja Puu – Paper and Timber” 1981, nr 63 (6–7), s. 432.
44. Oittinen P., Saarelma H., Papermaking science and technology: Book 13: Printing, Helsinki [etc.]: Fapet Oy [etc.], 1998.
45. Olsson I., Pihl L., Printing studies at the swedish graphic arts research laboratory, Stockholm, Sweden, „TAPPI” 1954, nr 37 (1), s. 42–46.
46. Panak J., Čeppan M. i in., Poligrafia – procesy i technika, Warszawa 2009.
47. Peterson S., Smash-resistant offset printing blanket, 1966, US Patent 3,285,799, URL http://www.google.com/patents/US3285799.
48. Pihl L., The ink transfer to paper in printing, „Svensk Papperstidning” 1952, nr 10, s. 358–362.
49. Pobboravsky I., Pearson M., Daniel C., Application of a dynamic measurement technique for the investigation of the cause of dot gain in web offset lithography, „TAGA Journal of Graphic Technology” 1989.
50. Poprjaduchin P., Technologija pečatnych processov, Moskwa 1968.
51. Raskina A. N. (red.), Technologija pečatnych processov, Moskwa 1989.
52. Sarela S., Uncoated paper surface for coldset web offset printing: set-off studies, Rozprawa doktorska, Helsinki University of Technology, 2004.
53. Sarela S., Harkonen E., Paulapuro H., Evaluation of ink transfer theory, „TAGA Proceedings (2002)”, 2002.
54. Senthil Vadivu K., Sankaranarayanan N., Mahalakshmi N.V., Design and development of a pressure sensing device in offset printing machine, „Journal of the Institution of Engineers: Mechanical Engineering Division” 2006, nr 87, s. 12–14.
55. Shuqin W., Yiming W., Chengwen C., Jianjun B., Research on the methods of the measurement of printing pressure in offset press, Measuring Technology and Mechatronics Automation, 2009. ICMTMA’09. International Conference on, tom 1, 342–344, IEEE, 2009.
56. Stachowicz S., Kamińska M., Strefa kontaktu układu drukującego, „Opakowanie” 2005, nr 12, s. 31–33.
57. Stępień K., Eksploatacja obciągów offsetowych, „Świat Druku” 2005, nr 3.
58. Szarkowski R., Właściwości i ograniczenia obciągów w procesie offsetowego drukowania zwojowego (prezentacja), XXXI Konfrontacje Poligraficzne, Warszawa 2015.
59. Tir K.V., Rabinovič M. B., Žovdak A.V., Techničeskaja ekspluatacija ploskich mašyn s ostanavlivajuščimsja pečatnym cylindrom i tigel’nych mašyn, Moskwa 1952.
60. Tjurin A.A., Pečatnye mašyny – avtomaty, Moskwa 1980.
61. Vadivu K.S., Sankaranarayanan N., Blankets – how they influence print quality, „Rind Survey” 2013, nr 34 (3), s. 12–23.
62. Varga A., Stott T. F., Distribution of pressure between a pair of pressure rollers, 1956, US Patent 2,762,295, URL https://www.google.com/patents/US2762295.html.
63. Varga J. M. J., Pressure rollers, 1966, US Patent 3,240,148, URL http://www.google.ch/patents/US3240148.
64. Vrotacoe J., Hammond C., Gagne D.,Varying profile cylinder blanket, 2001, US Patent 6,283,027, URL https://www.google.com/patents/US6283027.
65. Wanske M., Klein R., Grossmann H., Assessing the surface structure of printing papers under pressure, „Wochenblatt fur Papierfabrikation” 2006, nr 134 (19), s. 1109–1114.
66. Wu Jin-zhi, Gong Zhong-zhi, Printing pressure distribution in contact areas of offset press cylinder, „TAGA Proceedings” 1988, 251–258.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-49cab2f1-180f-477e-ac84-5d98e6987609