Confinement effectiveness of CFRP strengthened ultra-high performance concrete cylinders exposed to elevated temperatures

• Autorzy: Abadel Aref A. , Alharbi Yousef R.

Identyfikatory

DOI

10.2478/msp-2021-0040

• Języki publikacji: EN

Abstrakty

EN

Fire-related damage is an alarming concern to reinforced concrete (RC) structures throughout their service lives. When exposed to extreme temperatures, concrete can endure severe damage. Given that a complete replacement and/or demolition of fire-damaged structures can be an economic waste, a more viable option for extending the service life of the damaged structures involves repairing or strengthening the damaged members. Due to its more efficient qualities over conventional concrete, the use of concrete, such as ultra-high-performance concrete (UHPC) in the building industry, has dramatically grown in recent years. However, limited information is available about the confinement behavior of the unheated and heated UHPC members, particularly when wrapped with fiber-reinforced polymers (FRP). This paper investigates the effect of carbon fiber reinforced polymer (CFRP) sheet strengthening on the compressive strength of both UHPC and ultra-high-performance fiber reinforced concrete (UHPFRC). In this study, strengthening has been considered for the UHPC cylinders before and after they were subject to an elevated temperature of 400°C, and they were left to cool by air cooling. Six UHPC mixes, which were made without the use of fibers, steel fibers (SF) alone, a hybrid system of SF and polyethylene alcohol (PVA), in addition to a hybrid system of steel, PVA, and polypropylene (PP) fibers were tested. Regarding the plain and various fiber-reinforced UHPC both at room temperature and after being exposed to 400°C, the ultimate compressive strength of CFRP-confined concrete has shown an increase by 25% to 33% and 52% to 61%, respectively compared with the unheated specimens.

Słowa kluczowe

EN

UHPC; UHPFRC; steel fibre; synthetic fibre; confinement of CFRP; high temperature

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2021
• Tom: Vol. 39, No. 4
• Strony: 478--490
• Opis fizyczny: Bibliogr. 38 poz., rys., tab.

Twórcy

autor

Abadel Aref A.

• Department of Civil Engineering, College of Engineering, King Saud University, Saudi Arabi

autor

Alharbi Yousef R.

• Department of Civil Engineering, College of Engineering, King Saud University, Saudi Arabi

Bibliografia

• [1] Habel K, Viviani M, Denarié E, Brühwiler E. Development of the mechanical properties of an Ultra-High Performance Fiber Reinforced Concrete (UHPFRC). CemConcr Res. 2006;36:1362–70. https://doi.org/10.1016/J.CEMCONRES.2006.03.009
• [2] Ahmad S, Rasul M, Adekunle SK, Al-Dulaijan SU, Maslehuddin M, Ali SI. Mechanical properties of steel fiber-reinforced UHPC mixtures exposed to elevated temperature: Effects of exposure duration and fiber content. Compos Part B. 2019;168:291–301. https://doi.org/10.1016/J.COMPOSITESB.2018.12.083
• [3] Guler S, Yavuz D, Korkut F, Ashour A. Strength prediction models for steel, synthetic, and hybrid fiber reinforced concretes. Struct Concr. 2019;20:428–45. https://doi.org/10.1002/SUCO.201800088
• [4] Abadel A, Abbas H, Almusallam T, Al-Salloum Y, Siddiqui N. Mechanical properties of hybrid fibre-reinforced concrete – analytical modelling and experimental behaviour. Mag Concr Res. 2016;68:823–43. https://doi.org/10.1680/JMACR.15.00276
• [5] Guler S, Yavuz D, Aydın M. Hybrid fiber reinforced concrete-filled square stub columns under axial compression. Eng Struct. 2019;198:109504. https://doi.org/10.1016/J.ENGSTRUCT.2019.109504
• [6] Guler S, Akbulut ZF, Siad H, Lachemi M. Effect of macro polypropylene, polyamide and steel fibers on the residual properties of SCC at ambient and elevated temperatures. Constr Build Mater. 2021;289:123154 https://doi.org/10.1016/J.CONBUILDMAT.2021.123154
• [7] Abadel A, Elsanadedy H, Almusallam T, Alaskar A, Abbas H, Al-Salloum Y. Residual compressive strength of plain and fiber reinforced concrete after exposure to different heating and cooling regimes. Eur J Environ Civ Eng. 2021;1–20. https://doi.org/10.1080/19648189.2021.1960898
• [8] Poon CS, Azhar S, Anson M, Wong YL. Comparison of the strength and durability performance of normal-and high-strength pozzolanic concretes at elevated temperatures. Cem Concr Res. 2001;31:1291–300. https://doi.org/10.1016/S0008-8846(01)00580-4
• [9] Bastami M, Chaboki-Khiabani A, Baghbadrani M, Kordi M. Performance of high strength concretes at elevated temperatures. Sci Iran. 2011;18:1028–36. https://doi.org/10.1016/J.SCIENT.2011.09.001
• [10] Khan MS, Abbas H. Performance of concrete subjected to elevated temperature. Eur J Environ Civ Eng. 2015;20:532–43. https://doi.org/10.1080/19648189.2015.1053152
• [11] Kalifa P, Chéné G, Gallé C. High-temperature behavior of HPC with polypropylene fibres: From spalling to microstructure. Cem Concr Res. 2001;31:1487–99. https://doi.org/10.1016/S0008-8846(01)00596-8
• [12] Bangi MR, Horiguchi T. Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures. CemConcr Res. 2012;42:459–66. https://doi.org/10.1016/J.CEMCONRES.2011.11.014
• [13] Almusallam T, Ibrahim SM, Al-Salloum Y, Abadel A, Abbas H. Analytical and experimental investigations on the fracture behavior of hybrid fiber reinforced concrete. Cem Concr Compos. 2016;74:201–17. https://doi.org/10.1016/J.CEMCONCOMP.2016.10.002
• [14] Yermak N, Pliya P, Beaucour AL, Simon A, Noumowé A. Influence of steel and/or polypropylene fibres on the behaviour of concrete at high temperature: Spalling, transfer and mechanical properties. Constr Build Mater. 2017;132:240–50. https://doi.org/10.1016/J.CONBUILDMAT.2016.11.120
• [15] Noumowé A, Carré H, Daoud A, Toutanji H. High-strength self-compacting concrete exposed to fire test. J Mater Civ Eng. 2006;18:754–8. https://doi.org/10.1061/(ASCE)0899-1561(2006)18:6(754)
• [16] Phan L. Spalling and mechanical properties of high strength concrete at high temperature. Actes Des Journées Scientifiques Du LCPC. 2007:1595–608.
• [17] Chan SY, Peng GF, Chan JK. Comparison between high strength concrete and normal strength concrete subjected to high temperature. Mater Struct. 1996;29:616–9. https://doi.org/10.1007/BF02485969
• [18] Aslani F, Bastami M. Constitutive relationships for normal-and high-strength concrete at elevated temperatures. ACI Mater J. 2011;108:355–64. https://doi.org/10.14359/51683106
• [19] Lau A, Anson M. Effect of high temperatures on high performance steel fibre reinforced concrete. Cem Concr Res. 2006;36:1698–707. https://doi.org/10.1016/J.CEMCONRES.2006.03.024
• [20] Varona FB, Baeza FJ, Bru D, Ivorra S. Influence of high temperature on the mechanical properties of hybrid fibre reinforced normal and high strength concrete. Constr Build Mater. 2018;159:73–82. https://doi.org/10.1016/J.CONBUILDMAT.2017.10.129
• [21] Elsanadedy HM, Al-Salloum YA, Alsayed SH, Iqbal RA. Experimental and numerical investigation of size effects in FRP-wrapped concrete columns. Constr Build Mater. 2012;29:56–72. https://doi.org/10.1016/J.CONBUILDMAT.2011.10.025
• [22] Al-Salloum YA, Al-Amri GS, Siddiqui NA, Al-musallam TH, Abbas H. Effectiveness of CFRP strengthening in improving cyclic compression response of slender RC columns. J Compos Constr. 2018;22:04018009. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000842
• [23] Thériault M, Neale KW. Design equations for axially loaded reinforced concrete columns strengthened with fibre reinforced polymer wraps. Can J Civ Eng. 2011;27:1011–20. https://doi.org/10.1139/L00-019
• [24] Demers M, Neale KW. Confinement of reinforced concrete columns with fibre-reinforced composite sheets - an experimental study. Can J Civ Eng. 2011;26:226–41. https://doi.org/10.1139/L98-067
• [25] Al-Salloum YA, Almusallam TH, Elsanadedy HM, Iqbal RA. Effect of elevated temperature environments on the residual axial capacity of RC columns strengthened with different techniques. Constr Build Mater. 2016;115:345–61. https://doi.org/10.1016/J.CONBUILDMAT.2016.04.041
• [26] Abadel AA, Khan MI, Masmoudi R. Axial capacity and stiffness of post-heated circular and square columns strengthened with carbon fiber reinforced polymer jackets. Structures. 2021;33:2599–610. https://doi.org/10.1016/J.ISTRUC.2021.05.081
• [27] Alrshoudi F, Abbas H, Abadel A, Albidah A, Altheeb A, Al-Salloum Y. Compression behavior and modeling of FRP-confined high strength geo polymer concrete. Constr Build Mater. 2021;283:122759. https://doi.org/10.1016/J.CONBUILDMAT.2021.122759
• [28] Mandal S, Hoskin A, Fam A. Influence of concrete strength on confinement effectiveness of fiber-reinforced polymer circular jackets. Struct J. 2005;102:383–92. https://doi.org/10.14359/14409
• [29] Cui C, Sheikh SA. Experimental study of normal-and high-strength concrete confined with fiberreinforced polymers. J Compos Constr. 2010;14:553–61. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000116
• [30] Zohrevand P, Mirmiran A. Behavior of ultrahigh-performance concrete confined by fiber-reinforced polymers. J Mater Civ Eng. 2011;23:1727–34. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000324
• [31] Saiidi MS, O’Brien M, Sadrossadat-Zadeh M. Cyclic response of concrete bridge columns using super elastic nitinol and bendable concrete. Struct J. 2009;106:69–77. https://doi.org/10.14359/56285
• [32] Wang W, Wu C, Liu Z, Si H. Compressive behavior of ultra-high performance fiber reinforced concrete (UHPFRC) confined with FRP. Compos Struct. 2018;204:419–37. https://doi.org/10.1016/J.COMPSTRUCT.2018.07.102
• [33] Lam L, Huang L, Xie JH, Chen JF. Compressive behavior of ultra-high performance concrete confined with FRP. Compos Struct. 2021;274:114321. https://doi.org/10.1016/J.COMPSTRUCT.2021.114321
• [34] Khan MS, Prasad J, Abbas H. Shear strength of RC beams subjected to cyclic thermal loading. Constr Build Mater. 2010;24:1869–77. https://doi.org/10.1016/J.CONBUILDMAT.2010.04.016
• [35] Khan MS, Prasad J, Abbas H. Bond strength of RC beams subjected to cyclic thermal loading. Constr Build Mater. 2013;38:644–57. https://doi.org/10.1016/J.CONBUILDMAT.2012.09.018
• [36] ISO. Fire-resistance tests – elements of building construction – part 1: General requirements. vol. ISO 834-1: 1999.
• [37] ASTM-C39. Standard test method for compressive strength of cylindrical concrete. Annual Book of ASTM Standards 2010. https://doi.org/D.O.I:10.1520/C0039_C0039M-10
• [38] Komonen J, Penttala V. Effects of high temperature on the pore structure and strength of plain and polypropylene fiber reinforced cement pastes. Fire Technol. 2003;39:23–34. https://doi.org/10.1023/A:1021723126005