Analysis of Cooling a Printed 3D Mold Using a Casting and Solidification Simulation of a CuSn20 Bronze Bell Casting

• Autorzy: Nadolski Maciej , Bernat Łukasz , Cekus Dawid , Kwiatoń Paweł , Pietrzak Adam

Identyfikatory

DOI

10.24425/amm.2024.147823

• Języki publikacji: EN

Abstrakty

EN

The work done in this study is a preliminary investigation into the possibility of modelling the filling and solidification process of castings in molds made with the additive method. The work originated from an experiment to produce a bronze casting with a high tin content in an additive mold. The mold filling and solidification simulation was carried out in the MAGMASOFT program, and the lambda thermal conductivity coefficient used in the program’s material database was corrected based on the actual temperature values of the printed form. The results were compared with the modeling results for the physical properties of furan molds based on the program database. The microstructure of the castings obtained in the compared forms was assessed.

Słowa kluczowe

EN

fran mold; sand-base 3D printing; bell bronze; 3D printing; casting; solidification

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2024
• Tom: Vol. 69, iss. 1
• Strony: 303--308
• Opis fizyczny: Bibliogr. 17 poz., fot., rys., tab.

Twórcy

autor

Nadolski Maciej

• Czestochowa University of Technology, Faculty of Production Engineering and Materials, Department of Metallurgy and Metal Technology, 42-200 Czestochowa, Poland

• https://orcid.org/0000-0001-6099-1369

autor

Bernat Łukasz

• Poznan University of Technology, Faculty of Mechanical Engineering, Institute of Materials Technology, Division of Foundry and Plastic Working, 60-965 Poznan, Poland

• https://orcid.org/0000-0002-2232-1628

autor

Cekus Dawid

• Czestochowa University of Technology, Faculty of Mechanical Engineering and Computer Science, Department of Mechanics and Machine Design Fundamentals, 42-200 Czestochowa, Poland

• https://orcid.org/0000-0002-5551-1153

autor

Kwiatoń Paweł

• Czestochowa University of Technology, Faculty of Mechanical Engineering and Computer Science, Department of Mechanics and Machine Design Fundamentals, 42-200 Czestochowa, Poland

• https://orcid.org/0000-0002-0067-0384

autor

Pietrzak Adam

• AGH University of Kraków, Faculty of Foundry Engineering, Department of Foundry, Al. Mickiewicza 30, 30-059 Krakow, Poland

• https://orcid.org/0000-0002-0193-3318

Bibliografia

• [1] O. Abdulhameed, A. Al-Ahmari, W. Ameen, S.H. Mian, Adv. Mech. Eng. 11 (2), (2019). DOI: https://doi.org/10.1177/1687814018822880
• [2] C.W. Hull, Apparatus for production of three-dimensional objects by stereo-lithography. US Patent No. US5556590 A, (1996).
• [3] C.R. Deckard, Method and apparatus for producing parts by selective sintering. European Patent No. EP0287657, (1989).
• [4] T. Sivarupan, N. Balasubramani, P. Saxena, D. Nagarajan, M. El Mansori, K. Salonitis, M. Jolly, M.S. Dargush, Addit. Manuf. 40, 101889 (2021). DOI: https://doi.org/10.1016/j.addma.2021.101889
• [5] B. Lu, China Mech. Eng. 31 (1), 19-23 (2020). DOI: https://doi.org/10.3969/j.issn.1004-132X.2020.01.003
• [6] S.R. Sama, J. Wang, G. Manogharan, J. Manuf. Proc. 34B, 765-775 (2018). DOI: https://doi.org/10.1016/j.jmapro.2018.03.049
• [7] D. Tachibana, K. Matsubara, R. Matsuda, T. Furukawa, S. Maruo, Y. Tanaka, O. Fuchiwaki, H. Ota, Adv. Mat. Tech. 5 (1), 1900794 (2019). DOI: https://doi.org/10.1002/admt.201900794
• [8] M. Gao, L. Li, Q. Wang, Z. Ma, X. Li, Z. Liu, Int. J. Pr. Eng. Man-GT 9, 305-322 (2022). DOI: https://doi.org/10.1007/s40684-021-00323-w
• [9] J. Walker, E. Harris, C. Lynagh, A. Beck, R. Lonardo, B. Vuksanovich, J. Thiel, K. Rogers, B. Conner, E. MacDonald, Int. J. Metalcast. 12, 785-796 (2018). DOI: https://doi.org/10.1007/s40962-018-0211-x
• [10] P. Rodriguez-Gonzalez, P. Zapico, P.E. Robles-Valer, J. Barreiro, Addit. Manuf. 59A, 103142 (2022). DOI: https://doi.org/10.1016/j.addma.2022.103142
• [11] N. Hawaldar, J. Zhang, Int. J. Adv. Man. Tech. 97, 1037-1045 (2018). DOI: https://doi.org/10.1007/s00170-018-2020-z
• [12] S. Tang, L. Yang, Z. Fan, W. Jiang, X. Liu, China Foundry 18, 249-264 (2021). DOI: https://doi.org/10.1007/s41230-021-1003-0
• [13] L. Wang, X. Dong, S. Guo, China Foundry 18, 344-350 (2021). DOI: https://doi.org/10.1007/s41230-021-1091-x
• [14] K. Hu, H. Wang, K. Lu, Q. Feng, D. Yang, J. Cao, B. Zhang, Z. Lu, X. Ran, China Foundry 19, 369-379 (2022). DOI: https://doi.org/10.1007/s41230-022-2048-4
• [15] P. Kwiatoń, D. Cekus, M. Nadolski, K. Sokół, Z. Saternus, P. Pavlicek, Acta Phys. Pol. A 142 (1), 188-191 (2022). DOI: https://doi.org/10.12693/APhysPolA.142.188
• [16] M. Nadolski, D. Cekus, The influence of casting parameters on the sound of a bell, in: METAL 2017: 26th International Conference on Metallurgy and Materials, TANGER LTD, 1893-1898, 2017.
• [17] D. Cekus, P. Kwiatoń, M. Nadolski, K. Sokół, Eng. Sci. Tech. Int. J. 24 (4), 1042-1048 (2021). DOI: https://doi.org/10.1016/j.jestch.2021.01.012