PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Maintaining thermal comfort and air quality in buildings

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Utrzymanie komfortu cieplnego i jakości powietrza w budynku
Języki publikacji
EN
Abstrakty
EN
Maintaining the proper indoor microclimate and the correct level of thermal comfort is extremely important due to the impact of the surrounding environment on people's satisfaction, well-being, health, and work. This problem is particularly important in rooms where children spend long periods as the environment has a stronger influence on their still-developing organisms. The study assessed the microclimate parameters, the state of human thermal comfort, and the level of carbon dioxide concentration, as well as the maintained levels of comfort and air quality after the application of improvements aimed at rationalizing heat consumption in educational buildings. The results of basic thermal and personal microclimate parameter measurements, as well as carbon dioxide levels, were presented. The assessment of human thermal comfort was based on measured values, the Predicted Mean Vote, and Predicted Percentage Dissatisfied. The average rating of thermal comfort in the observed environment was within the acceptable comfort zone, but high concentrations of carbon dioxide indicates low efficiency of the ventilation system.
PL
Utrzymanie właściwego stanu mikroklimatu wnętrz oraz prawidłowego poziomu komfortu cieplnego osób jest niezwykle ważne ze względu na wpływ otaczającego środowiska i zadowolenia ludzi z warunków, w jakich przebywają na ich samopoczucie, zdrowie i komfort pracy. Problem ten jest szczególnie istotny w pomieszczeniach przeznaczonych do długotrwałego przebywania dzieci ze względu na silniejszy wpływ otoczenia na jeszcze nie w pełni ukształtowany organizm. W pracy dokonano oceny parametrów mikroklimatu, stanu komfortu cieplnego i poziomu stężenia ditlenku węgla, a także oceny utrzymania warunków komfortu i jakości powietrza po zastosowaniu ulepszeń mających na celu racjonalizację zużycia ciepła w budynkach edukacyjnych. Przedstawiono wyniki pomiarów podstawowych termicznych i osobowych parametrów mikroklimatu oraz poziomu stężenia ditlenku węgla. Ocenę komfortu cieplnego ludzi oparto na zmierzonych wartościach przewidywanego średniej oceny komfortu cieplnego i przewidywanego procentu osób niezadowolonych z istniejących warunków otoczenia. Średnia ocena komfortu cieplnego w obserwowanym środowisku mieściła się w dopuszczalnej strefie komfortu, ale wysokie stężenie ditlenku węgla wskazuje na niską wydajność systemu wentylacji.
Rocznik
Strony
137--144
Opis fizyczny
Bibliogr. 28 poz., rys., tab.
Twórcy
autor
  • Czestochowa University of Technology, Faculty of Civil Engineering, ul. Akademicka 3, 42-218 Czestochowa
Bibliografia
  • [1] Djongyanga N., Tchindac R., Njomo D., Thermal comfort: A review paper, Renewable and Sustainable Energy Reviews 2010, 14(9), 2626-2640.
  • [2] Carlucci S., Thermal Comfort Assessment of Buildings, Springer Briefs in Applied Sciences and Technology, Springer, Milano 2013.
  • [3] Fabbri K., Indoor Thermal Comfort Perception, Springer International Publishing, Switzerland, 2015.
  • [4] Fanger P.O., Popiołek Z., Wargocki P., Środowisko wewnętrzne. Wpływ na zdrowie, komfort i wydajność pracy, Wydawnictwo Politechniki Śląskiej, Gliwice 2003.
  • [5] Godish T., Indoor Environmental Quality, Lewis Publishers, Boca Raton, London New York Washington, 2016.
  • [6] Al Horr Y., Arif M., Katafygiotou M., Mazroei A., Kaushik A., Elsarrag E., Impact of indoor environmental quality on occupant well-being and comfort: A review of the literature, International Journal of Sustainable Built Environment 2016, 5(1), 1-11.
  • [7] Directive 2018/844/EU of The European Parliament and of the Council of 30 May 2018 amending Directive 2010/31/EU on the energy performance of buildings and Directive 2012/27/EU on energy efficiency.
  • [8] Evolution of WHO air quality guidelines: past, present and future, WHO Regional Office for Europe, Copenhagen, 2017.
  • [9] Enescu D., A review of thermal comfort models and indicators for indoor environments, Renewable and Sustainable Energy Reviews 2017, 79, 1353-1379.
  • [10] Taleghani M., Tenpierik M., Kurvers S., den Dobbelsteen A., A review into thermal comfort in buildings, Renewable and Sustainable Energy Reviews 2013, 26, 201-215.
  • [11] Carluccia S., Baiab L., de Dearc R., Yang L., Review of adaptive thermal comfort models in built environmental regulatory documents, Building and Environment 2018, 137, 73-89.
  • [12] Halawaa E., van Hoof J., The adaptive approach to thermal comfort: A critical overview, Energy and Buildings 2012, 51, 101-110.
  • [13] Mihaia T., Iordacheb V., Determining the indoor environment quality for an educational building, Energy Procedia 2016, 85, 566–574.
  • [14] School environment: policies and current status, WHO Regional Office for Europe, 2015.
  • [15] Zomorodian Z.S., Tahsildoosta M., Hafezi M., Thermal comfort in educational buildings: A review article, Renewable and Sustainable Energy Reviews 2016, 59, 895-906.
  • [16] Turunen M., Toyinbo O., Putus T., Nevalainen A.,, Shaughnessy R., Haverinen-Shaughnessy U., Indoor environmental quality in school buildings, and the health and wellbeing of students. International Journal of Hygiene and Environmental Health 2014, 217(7) 733-739.
  • [17] Haverinen-Shaughnessy U., Shaughnessy R.J., Cole E.C., Toyinbo O., Moschandreas D.J., An assessment of indoor environmental quality in schools and its association with health and performance. Building and Environment 2015, 9(1), 35-40.
  • [18] PN-EN 16798-1:2019-06 Energy performance of buildings - Ventilation for buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6.
  • [19] ASHRAE Standard 55-2017 Thermal Environmental Conditions for Human Occupancy.
  • [20] PN-EN ISO 7730:2006, Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria.
  • [21] PN-EN ISO 9920:2009, Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble.
  • [22] PN-EN ISO 8996:2005, Ergonomics of the thermal environment - Determination of metabolic rate.
  • [23] Kapalo P., Domniţa F., Bacoţiu C., Spodyniuk N., The impact of carbon dioxide concentration on the human health - case study, Journal of Applied Engineering Sciences 2018, 8(21), 61-66.
  • [24] Regulation of the Minister of Family, Labour and Social policy of 12th June 2018 on maximum permissible concentration and intensity of agents harmful to health in the working environment (OJ 2018, item. 1286).
  • [25] Januszkiewicz K., The health protective and energy saving urban environment at the time of climate change, Budownictwo o zoptymalizowanym potencjale energetycznym 2017, 2(20), 43-50.
  • [26] Sowa J., Jakość powietrza w budynkach modernizowanych, Izolacje 2018,. 23(2), 76-82.
  • [27] Materials for Energy Efficiency and Thermal Comfort in Buildings, Ed.: M.R.Hall, Woodhead Publishing Limited, 2010.
  • [28] Yang L., Yan H., Lam J.C., Thermal comfort and building energy consumption implications - A review, Applied Energy 2014, 115, 164-173.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-4926180c-4f07-4d9e-8635-7fe97b4a617d
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.