Strength analysis of the frame of a trailer

• Autorzy: Medvecká-Beňová S.

Identyfikatory

DOI

10.20858/sjsutst.2017.96.10

• Języki publikacji: EN

Abstrakty

EN

A trailer for carrying a small boat or water scooters was designed for a private sector company. It was a category O1 non-braked trailer with a gross weight up to 750 kg and a height-adjustable traction device. The frame must be designed and installed in such a way that, during its proposed lifetime, it will withstand all the loads and influences that may occur during construction and operation with an appropriate level of reliability. The designed frame of the trailer is a welded galvanized structure. The article is devoted to the problems related to the stress analysis of a trailer frame.

Słowa kluczowe

EN

trailer; frame; design; strength analysis; Finite Element Method

PL

naczepa; rama; projekt; analiza wytrzymałościowa; metoda elementów skończonych

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Zeszyty Naukowe. Transport / Politechnika Śląska
• Rocznik: 2017
• Tom: z. 96
• Strony: 105--113
• Opis fizyczny: Bibliogr. 13 poz.

Twórcy

autor

Medvecká-Beňová S.

• Faculty of Mechanical Engineering, Department of Construction, Automotive and Transport Engineering Technical University of Košice, Letná 9 Street, 042 00 Košice, Slovakia

Bibliografia

• 1. Czech Piotr. 2012. “Diagnosis of industrial gearboxes condition by vibration and timefrequency, scale-frequency, frequency-frequency analysis.” Metalurgija 51(4): 521-524. ISSN: 0543-5846.
• 2. Czech Piotr. 2012. “Identification of leakages in the inlet system of an internal combustion engine with the use of Wigner-Ville transform and RBF neural networks.” In: Jerzy Mikulski, ed., 12th International Conference on Transport Systems Telematics. Katowice Ustron, Poland. 10-13 October 2012. Telematics in the Transport Environment. Book Series: Communications in Computer and Information Science Vol. 329: 414-422. DOI: http://doi.org/10.1007/978-3-642-34050-5_47. ISSN: 1865-0929. ISBN: 978-3- 642-34049-9.
• 3. Figlus Tomasz, Marcin Stańczyk. 2016. “A method for detecting damage to rolling bearings in toothed gears of processing lines.” Metalurgija 55(1): 75-78. ISSN: 0543- 5846.
• 4. Figlus Tomasz, Marcin Stańczyk. 2014. “Diagnosis of the wear of gears in the gearbox using the wavelet packet transform.” Metalurgija 53(4): 673-676. ISSN: 0543-5846.
• 5. Gąska Damian, Tomasz Haniszewski, Jerzy Margielewicz. 2017. “I-beam girders dimensioning with numerical modelling of local stresses in wheel-supporting flanges.” Mechanika 23(3): 347-352. ISSN 1392-1207.
• 6. Kim Jung-Seok. 2006. “Fatigue assessment of tilting bogie frame for Korean tilting train: analysis and static tests.” Engineering Failure Analysis 13(8): 1326-1537. ISSN 1350- 6307.
• 7. Lotte Berghman, Roel Leus. 2015. “Practical solutions for a dock assignment problem with trailer transportation.” European Journal of Operational Research. 246(3): 787-799. ISSN 0377-2217. DOI: http://doi.org/10.1016/j.ejor.2015.05.057.
• 8. Lučanin Vojkan J., Simić Goran Ž., Milković Dragan D., Ćuprić Nenad, Golubović Snežana D. 2010. “Calculated and experimental analysis of cause of the appearance of cracks in the running bogie frame of diesel multiple units of Serbian railways.” Engineering Failure Analysis 17(1): 236-248. ISSN 1350-6307.
• 9. Madej Henryk, Czech Piotr. 2010. “Discrete wavelet transform and probabilistic neural network in IC engine fault diagnosis.” Eksploatacja i Niezawodnosc – Maintenance and Reliability 4(48): 47-54. ISSN 1507-2711.
• 10. Manesis Stamatis. 1998. “Off-tracking elimination in road trains of heavy duty trucks with multiple semi-trailers.” IFAC Proceedings Volumes 31(20): 355-359. DOI: http://doi.org/10.1016/S1474-6670(17)41820-9.
• 11. Mathissen Marcel, Scheer Volker, Kirchner Ulf, Vogt Rainer, Benter Thorsten. 2012. “Non-exhaust PM emission measurements of a light duty vehicle with a mobile trailer.” Atmospheric Environment 59: 232-242. ISSN 1352-2310.
• 12. Standard STN EN 1993-1-8: Eurokód 3 Design of Steel Structures. Part 1-8: Design of Nodes. Bratislava: STUN, 2007.
• 13. Wittek Adam Marek, Damian Gąska, Bogusław Łazarz, Tomasz Matyja. 2014. “Automotive stabilizer bar – stabilizer bar strength calculations using FEM, ovalization of radial areas of tubular stabilizer bars.” Mechanika 20(6): 535-542. ISSN 1392-1207.