Influence of linear feed drive controller setting in CNC turning lathe on the stability of machining

• Autorzy: Grau Jan , Sulitka Matej , Soucek Pavel

Identyfikatory

DOI

10.5604/01.3001.0013.2221

• Języki publikacji: EN

Abstrakty

EN

The paper deals with the influence of linear feed drive controller setting of a CNC turning lathe on the stability of machining. A coupled simulation model of feed drive control and ball screw drive mechanics with a transmission belt was created and validated by the feed drive diagnostic measurements. The influence of drive control on the overall dynamic compliance at the TCP and the limits of stable depth of cut was examined. Impact of the feed drive actual kinematics configuration on the stability limits was studied as well.

Słowa kluczowe

EN

chatter; ball-screw; feed drive

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2019
• Tom: Vol. 19, No. 2
• Strony: 18--31
• Opis fizyczny: Bibliogr. 19 poz., rys., tab.

Twórcy

autor

Grau Jan

• CTU – Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Production Machines and Equipment, Prague, Czech Republic

autor

Sulitka Matej

• CTU – Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Production Machines and Equipment, Prague, Czech Republic

autor

Soucek Pavel

• CTU – Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Production Machines and Equipment, Prague, Czech Republic

Bibliografia

• [1] QUINTANA G., CIURANA J., 2011, Chatter in machnining processes: A review, International Journal of Machine Tools and Manufacture, 51/5, 363–376.
• [2] TAYLOR F.W., 1907, On the art of cutting metals, New York, American Society of Mechanical Engineers, 2888763.
• [3] TLUSTY J., POLACEK M., 1963, The stability of machine tools against self-excited vibrations in machining, Proceedings of the ASME International Research in Production Engineering, 465–474.
• [4] TOBIAS S.A., FISHWICK W., 1958, A theory of Regenerative chatter, The Engineer-London.
• [5] MERRITT H.E., 1965, Theory of Self-Excited Machine-Tool Chatter: Contribution to Machine-Tool Chatter Research, Journal of Engineering for Industry, 87, 447–454.
• [6] ALTINTAS Y., BUDAK E., 1995, Analytical Prediction of Stability Lobes in Milling, CIRP Annals – Manufacturing Technology, 44/1, 357–362.
• [7] STONE B., 2014, Chatter and Machine Tools, Springer International Publishing, 978-3-319-05235-9.
• [8] KOLAR P., et al. 2012, An integrated approach to the development of machine tool structural parts, MM Science Journal, 9th International Conference on Machine Tools, Automation, Technology and Robotics MATAR, 1–7.
• [9] KOLAR P., et al. 2013, Modern Methods for efficientMachine Tool Design, 10th International Conference on High Speed Machining, Darmstadt: Abele, Metternich, 26–27.
• [10] MÖHRING H.-Ch., et al., 2017, Intelligent Hybrid Material Slide Component for Machine Tools, Journal of Machine Engineering, 17/1, 31–45.
• [11] ITO Y., 2013, Position Paper – Fundamental Issues in Self-excited Chatter in Turning, Journal of Machine Engineering, 13/3, 7–25.
• [12] COWLEY A., BOYLE A., 1970, Active Dampers for Machine Tools, CIRP Anals, 18/1, 213–222.
• [13] BLEICHER F., SCHÖRGHOFER P., HABERSOHN C., 2018, In-process control with a sensory tool holde to avoid chatter, Journal of Machine Engineering, 18/3, 16–27.
• [14] MUNOA J., et al., 2015, Active Suppression of Structural Chatter vibrations Using Machine Drives and Accelerometers, Annals of the CIRP, 64/1, 385–388.
• [15] NOVOTNY L., et al., 2018, Damping in machine tool structure, Proceedings od 14th International Conference on High Speed Machining: Productivity, Quality and Digitalization, San Sebastian: Uriate, Munoa, 17–18 April.
• [16] BILBAO-GUILLERNA A., BARRIOS A., MANCISIDOR I., et al., 2010, Control laws for chatter suppression in milling using an inertial actuator, Proceedings of ISMA, International Conference on Noise and Vibration Engineering, Sep., 1–12.
• [17] LEHOTZKY D., TURI J., INSPERGER T., 2014, Stabilizability diagram for turning processes subjected to digital PD control: A review, International Journal of Dynamics and Control, 2195-268X, 2/1, 46–54.
• [18] BEUDAERT X., et al., 2016, Analysis of the feed drives control parameters on structural chatter vibrations, XIII International Conference on High Speed Machining (HSM2016), LEM3, Oct 2016, Metz, France, hal01484796.
• [19] SLAVIK J., STEJSKAL V., ZEMAN V., 1997, Zaklady dynamiky stroju, Praha, CVUT, 80-01-01622-6.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).