Synthesis of Ti-Nb-Zr Alloys Combined Powder Metallurgy and Arc Melting Methods

• Autorzy: Matuła Izabela , Dercz Grzegorz , Prusik Krystian , Szklarska Magdalena , Kazek-Kęsik Alicja , Simka Wojciech , Sudoł E.

Identyfikatory

DOI

10.24425/amm.2023.145482

• Języki publikacji: EN

Abstrakty

EN

Scientists and medics are still searching for new metallic materials that can be used in medicine, e.g., as material for implants. The following article proposes materials based on titanium with vital elements prepared by combined powder metallurgy and arc melting methods. Four compositions of Ti-28Ta-9Nb, Ti-28Ta-19Nb, Ti-28Ta-9Zr and Ti-28Ta-19Zr (wt.%) have been prepared. The tested material was thoroughly analyzed by X-ray diffraction and scanning electron microscopy. Qualitative phase analysis using X-ray diffraction showed the presence of two phases, α' and β titanium. In addition, a microhardness test was conducted, and the material was characterized in terms of corrosion properties. It was found that the corrosion resistance decreases with an increase of the β phase presence.

Słowa kluczowe

EN

titanium-based alloys; biomaterials; arc-melting; structure; corrosion

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 3
• Strony: 1115--1120
• Opis fizyczny: Bibliogr. 29 poz., fot., rys., tab., wykr., wzory

Twórcy

autor

Matuła Izabela

• University of Silesia in Katowice, Institute of Materials Engineering, 75 Pułku Piechoty Str., 1 A, 41-500 Chorzów, Poland

• https://orcid.org/0000-0001-8013-7776

autor

Dercz Grzegorz

• University of Silesia in Katowice, Institute of Materials Engineering, 75 Pułku Piechoty Str., 1 A, 41-500 Chorzów, Poland

• https://orcid.org/0000-0003-3682-7184

autor

Prusik Krystian

• University of Silesia in Katowice, Institute of Materials Engineering, 75 Pułku Piechoty Str., 1 A, 41-500 Chorzów, Poland

• https://orcid.org/0000-0002-0538-0749

autor

Szklarska Magdalena

• University of Silesia in Katowice, Institute of Materials Engineering, 75 Pułku Piechoty Str., 1 A, 41-500 Chorzów, Poland

• https://orcid.org/0000-0001-8716-630X

autor

Kazek-Kęsik Alicja

• Silesian University of Technology, Faculty of Chemistry, 6 B. Krzywoustego Str., 44-100 Gliwice, Poland

• https://orcid.org/0000-0001-9971-7279

autor

Simka Wojciech

• Silesian University of Technology, Faculty of Chemistry, 6 B. Krzywoustego Str., 44-100 Gliwice, Poland

• https://orcid.org/0000-0002-2648-5523

autor

Sudoł E.

• Graduate, Institute of Materials Engineering, University of Silesia in Katowice, 75 Pułku Piechoty Street 1 A, 41-500 Chorzów, Poland

Bibliografia

• [1] A.M. Khorasani, M. Goldberg, E.H. Doeven, G. Littlefair, Titanium in Biomedical Applications-Properties and Fabrication: A Review, J. Biomater. Tissue Eng. 5, 593-619 (2015). DOI: https://doi.org/10.1166/jbt.2015.1361
• [2] Y. Li, C. Yang, H. Zhao, S. Qu, X. Li, Y. Li, New developments of ti-based alloys for biomedical applications, Materials 7, 1709-1800 (2014). DOI: https://doi.org/10.3390/ma7031709
• [3] M. Niinomi, M. Nakai, J. Hieda, Development of new metallic alloys for biomedical applications, Acta Biomater. 8, 3888-3903 (2012). DOI: https://doi.org/10.1016/j.actbio.2012.06.037
• [4] M. Long, H.J. Rack, Titanium alloys in total joint replacement - a materials science perspective, Biomaterials 19 (18), 1621-1639 (1998). DOI: https://doi.org/10.1016/S0142-9612(97)00146-4
• [5] K.J. Bozic, S.M. Kurtz, E. Lau, K. Ong, D.T.P. Vail, D.J. Berry, The epidemiology of revision total hip arthroplasty in the United States, J. Bone Joint Surg. Am. 91, 128-133 (2009). DOI: https://doi.org/10.2106/JBJS.H.00155
• [6] J. Willis, S. Li, S.J. Crean, F.N. Barrak, Is titanium alloy Ti-6Al-4 V cytotoxic to gingival fibroblasts - A systematic review, Clin. Exp. Dent. Res. 7, 1037-1044 (2021). DOI: https://doi.org/10.1002/CRE2.444
• [7] K. Wang, The use of titanium for medical applications in the USA, Materials Science and Engineering: A213 (1-2), 134-137 (1996). DOI: https://doi.org/10.1016/0921-5093(96)10243-4
• [8] S. Rao, T. Ushida, T. Tateishi, Y. Okazaki, S. Asao, Effect of Ti, Al, and V ions on the relative growth rate of fibroblasts (L929) and osteoblasts (MC3T3-E1) cells, Biomed. Mater. Eng. 6, 79-86 (1996). DOI: https://doi.org/10.3233/BME-1996-6202
• [9] K.L. Wapner, Implications of metallic corrosion in total knee arthroplasty, Clin. Orthop. Relat. Res. 271, 12-20 (1991).
• [10] I. Matuła, G. Dercz, M. Zubko, J. Maszybrocka, J. Jurek-Suliga, S. Golba, I. Jendrzejewska, Microstructure and porosity evolution of the Ti-35Zr biomedical alloy produced by elemental powder metallurgy, Materials 13 (20), 1532 (2020). DOI: https://doi.org/10.3390/ma13204539
• [11] T.B. Massalski, H. Okamoto, P.R. Subramanian, B. Massalski, L. Thaddeus, Binary Alloy Phase Diagrams, 2nd Editio, ASM International, 1990.
• [12] J. Breme, V. Wadewitz, Comparison of titanium-tantalum and titanium-niobium alloys for application as dental implants, Int. J. Oral Maxillofac. Implants. 4, 113-118 (1989).
• [13] Y. Guo, K. Georgarakis, Y. Yokoyama, A.R. Yavari, On the mechanical properties of TiNb based alloys, J. Alloys Compd. 571, 25-30 (2013). DOI: https://doi.org/10.1016/j.jallcom.2013.03.192
• [14] J.M. Cordeiro, T. Beline, A.L.R. Ribeiro, E.C. Rangel, N.C. da Cruz, R. Landers, L.P. Faverani, L.G. Vaz, L.M.G. Fais, F.B. Vicente, C.R. Grandini, M.T. Mathew, C. Sukotjo, V.A.R. Barão, Development of binary and ternary titanium alloys for dental implants. Dent. Mater. 33, 1244-1257 (2017). DOI: https://doi.org/10.1016/j.dental.2017.07.013
• [15] D. Kuroda, M. Niinomi, M. Morinaga, Y. Kato, T. Yashiro, Design and mechanical properties of new i type titanium alloys for implant materials, Mater. Sci. Eng. A 243, 244-249 (1998).
• [16] S. Miyazaki, K. Otsuka, Development of Shape Memory Alloys, ISIJ Int. 29, 353-377 (1989). DOI: https://doi.org/10.2355/isijinternational.29.353
• [17] D.B. Wiles, R.A. Young, A new computer program for Rietveld analysis of X-ray powder diffraction patterns, J. Appl. Cryst. 14, 149-151 (1981).
• [18] H.M. Rietveld, A Profile Refinement Method for Nuclear and Magnetic Structure, J. Appl. Cryst. 3, 65-69 (1969).
• [19] R.A. Young, The Rietveld method, 1993, Oxfor Univ. Press.
• [20] C.M. Lee, C.P. Ju, J.H. Chern Lin, Structure-property relationship of cast Ti-Nb alloys, J. Oral Rehabil. 29, 314-322 (2002). DOI: https://doi.org/10.1046/J.1365-2842.2002.00825.X
• [21] A.I. Mardare, A. Savan, A. Ludwig, A.D. Wieck, A.W. Hassel, A combinatorial passivation study of Ta-Ti alloys, Corros. Sci. 51, 1519-1527 (2009). DOI: https://doi.org/10.1016/J.CORSCI.2008.12.003
• [22] G. Dercz, I. Matuła, M. Zubko, A. Kazek-Kęsik, J. Maszybrocka, W. Simka, J. Dercz, P. Świec, I. Jendrzejewska, Synthesis of porous Ti-50Ta alloy by powder metallurgy, Mater. Charact. 142, 124-136 (2018). DOI: https://doi.org/10.1016/j.matchar.2018.05.033
• [23] W.F. Ho, W.K. Chen, S.C. Wu, H.C. Hsu, Structure, mechanical properties, and grindability of dental Ti-Zr alloys, J. Mater. Sci. Mater. Med. 19, 3179-3186 (2008). DOI: https://doi.org/10.1007/s10856-008-3454-x
• [24] M. Takahashi, M. Kikuchi, O. Okuno, Grindability of Dental Cast Ti-Zr Alloys, Mater. Trans. 50 (4), 859-863 (2009). DOI: https://doi.org/10.2320/matertrans.MRA2008403
• [25] M. Abdel-Hady, H. Fuwa, K. Hinoshita, H. Kimura, Y. Shinzato, M. Morinaga, Phase stability change with Zr content in B-type Ti-Nb alloys, Scr. Mater. 57, 1000-1003 (2007). DOI: https://doi.org/10.1016/j.scriptamat.2007.08.003
• [26] M. Abdel-Hady Gepreel, M. Niinomi, Biocompatibility of Ti-alloys for long-term implantation, J. Mech. Behav. Biomed. Mater. 20, 407-415 (2013). DOI: https://doi.org/10.1016/j.jmbbm.2012.11.014
• [27] G. Dercz, I. Matuła, M. Zubko, J. Dercz, Phase composition and microstructure of new Ti-Ta-Nb-Zr biomedical alloys prepared by mechanical alloying method, Powder Diffr. 32, S186-S192 (2017). DOI: https://doi.org/10.1017/S0885715617000045
• [28] S. Ozan, J. Lin, Y. Li, C. Wen, New Ti-Ta-Zr-Nb alloys with ultrahigh strength for potential orthopedic implant applications, J. Mech. Behav. Biomed. Mater. 75, 119-127 (2017). DOI: https://doi.org/10.1016/j.jmbbm.2017.07.011
• [29] X. Tang, T. Ahmed, H.J. Rack, Phase transformations in ­Ti-Nb-Ta and Ti-Nb-Ta-Zr alloys, J. Mater. Sci. 35, 1805-1811 (2000). DOI: https://doi.org/10.1023/A:1004792922155