Secondary separation of coking coal middlings in spiral separators

• Autorzy: Friebe Paweł , Matusiak Piotr , Kowol Daniel

Identyfikatory

DOI

10.32056/KOMAG2024.3.3

• Języki publikacji: EN

Abstrakty

EN

The results of recovery by secondary separation tests of coking coal middlings are presented. The gravitational separation method, based on the differences in densities among the feed grains in the stream of flowing water, was used in the tests. Coking coal middlings, obtained in the three-product separation process in the coal fines jig of the processing plant of the coking coal mine in the Silesian Voivodeship, were tested. The following spiral separators were used during the separation process: Reichert LD-4 and Krebs 2.85. Based the test results, the most advantageous feed density was determined for each separator. Using the above-mentioned feed density, the concentrate of the lowest ash content and the highest waste output was obtained. The process was repeated for the optimal density to check how the grain classes of the feed separate in the secondary separation products containing coking coal interlayers.

Słowa kluczowe

EN

coking coal; spiral separators; coal interlayers

PL

węgiel; separatory; maszyny górnicze

• Wydawca: Instytut Techniki Górniczej KOMAG
• Czasopismo: Mining Machines
• Rocznik: 2024
• Tom: vol. 42, iss. 3
• Strony: 193--205
• Opis fizyczny: Bibliogr. 24 poz., tab., wykr.

Twórcy

autor

Friebe Paweł

• KOMAG Institute of Mining Technology, Pszczyńska 3744-100 Gliwice, Poland

autor

Matusiak Piotr

• KOMAG Institute of Mining Technology, Pszczyńska 3744-100 Gliwice, Poland

autor

Kowol Daniel

• KOMAG Institute of Mining Technology, Pszczyńska 3744-100 Gliwice, Poland

Bibliografia

• [1] Blaschke J.:Procesy technologiczne w przeróbce kopalin użytecznych, Kraków: Wydawnictwo Akademii Górniczo-Hutniczej im. S. Staszica, 1987, pp. 9.
• [2] Balasubramanian A.:Overview of mineral processing methods, Mysore: University of Mysore, 2015, pp. 1-13.
• [3] Blaschke W.:Inne metody wzbogacania, in: Poradnik górnika, 2nd ed., vol. 5. Z. Szczygieł-Antoniak, Ed. Katowice: Wydawnictwo „Śląsk”, 1976, pp. 556.
• [4] Blaschke S.:Przeróbka mechaniczna kopalin, vol. 1. Katowice: Wydawnictwo „Śląsk”, 1982, pp. 407.
• [5] Walklate J. and Fourie P.: A history of gravity separation at Richards Bay Minerals. Journal-South African Institute of Mining and Metallurgy vol. 106(11), pp. 741-748, 2006
• [6] Blaschke W.: Technika wzbogacania grawitacyjnego. Wzbogacalniki strumieniowe. Katowice: Wydawnictwo „Śląsk”, 1999, pp. 7.
• [7] Nienaber E. C. and Auret L.: Experimental modelling and plant simulation of spiral concentrators: Comparing response surface methodology and extended Holland-Batt models, Minerals Engineering, vol. 141, pp. 105833, 2019.
• [8] Marion C., Grammatikopoulos T., Rudinsky S., Langlois R., Williams H., Chu P., Awais M., Gauvin R., Rowson N. A.and Waters K. E.: A mineralogical investigation into the pre-concentration of the Nechalacho deposit by gravity separation, Minerals Engineering, vol. 121, pp. 1–13, 2018.
• [9] Holland-Batt A. B. and Holtham P. N.: Particle and fluid motion on spiral separators, Minerals Engineering, vol. 4, no. 3-4, pp. 457–482, 1991.
• [10] Richards R. G., MacHunter D. M., Gates P. J.and Palmer M. K.: Gravity separation of ultra-fine (−0.1mm) minerals using spiral separators, Minerals Engineering, vol. 13, no. 1, pp. 65–77, 2000.
• [11] Szpyrka J. and Lutyński M.: Analysis of selected methods of beneficiating coal slurries deposited impoundments, Physicochemical Problems of Mineral Processing, vol. 48, no. 2, pp. 581-589, 2012.
• [12] Friebe P.: Przegląd literatury dotyczącej odzysku sproszkowanej mieszaniny stopu NdFeB z KOMEKO 2023, Przemysł Przyjazny dla środowiska. Konferencja naukowo-techniczna, Instytut Techniki Górniczej KOMAG, Gliwice 2023, s. 61-67, DOI:10.32056/KOMAG/KOMEKO2023.7, ISBN978-83-65593-32-0.
• [13] Baron R., Friebe P., Kowol D., Matusiak P.: Concept of a technological system for manufacturing the composite products based on impregnated wood waste Min. Mach. 2023, nr 4, s. 248-260, DOI: 10.32056/KOMAG2023.4.4
• [14] Friebe P., Suponik T., Nuckowski P.M: Research on Hard Drives in the Context of the Construction of Shredding Knives in the Recovery of Rare Earth Elements. Global Challenges for a Sustainable Society. EURECA-PRO 2022. Springer Proceedings in Earth and Environmental Sciences 2023, DOI:10.1007/978-3-031-25840-4_12.
• [15] Friebe P.: Development of a prototype shredder for WEEE equipped with NdFeB magnets. Min. Mach. 2023, nr 2, s. 143-157, DOI:10.32056/KOMAG2023.2.6.
• [16] Vysyaraju R., Pukkella A. K.and Subramanian S.: Experimental Investigation of Novel Enhanced Gravity Closed Spiral Classifier, Transactions of the Indian Institute of Metals, vol. 72, no. 8, pp. 2239–2248, 2019.
• [17] Can I., Ozsoy B. and Ergun L.: Developing an optimum beneficiation route for a low-grade chromite ore,Physicochemical problems of mineral processing, vol. 55, no. 4, pp. 865-878, 2019.
• [18] Das A., Hill B., Rossiter P., Wyss G.and Young C.: Characterization and processing of plant tailings for the recovery of fine garnet -a case study, Separation Science and Technology, vol. 56, no. 4, pp. 821–833, 2020.
• [19] Bazin C., Sadeghi M., Bourassa M., Roy P., Lavoie F., Cataford D., Rochefort C.and Gosselin C.: Size recovery curves of minerals in industrial spirals for processing iron oxide ores, Minerals Engineering, vol. 65, pp. 115–123, 2014.
• [20] Rozanski Z., Suponik T., Matusiak P., Kowol D., Szpyrka J., Mazurek M. and Wrona P.: Coal recovery from a coal waste dump, in Proc. E3S Web of Conferences, vol. 8, pp. 01052, 2016.
• [21] Holtham P. N.: Primary and secondary fluid velocities on spiral separators, Minerals Engineering, vol. 5, no. 1, pp. 79–91, 1992.
• [22] Mazurek M. and Manowska A.: Laboratoryjno-statystyczna ocena skuteczności wzbogacania mułów węglowych we wzbogacalniku spiralno-zwojowym typu Reichert LD-4, Systemy Wspomagania w Inżynierii Produkcji, vol. 6, no. 3, pp. 136-149, 2017.
• [23] Friebe P.: Wzbogacalniki strumieniowo-zwojowe do wydzielenia substancji węglowych z miałów,Maszyny Górnicze, vol. 156, no. 2, pp. 28-38, 2018.
• [24] Szpyrka J., Suponik T. and Lutyński M.:Impact of spiral separator geometrical parameters on the density separation of various fine-grained materials, in Proc. E3S Web of Conferences, vol. 18, pp. 01035, 2017.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).