Archives of Metallurgy and Materials - Tom Vol. 66, iss. 3 (2021) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 66, iss. 3

Czasopismo

Archives of Metallurgy and Materials

Wydawca

Institute of Metallurgy and Materials Science of Polish Academy of Sciences
Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences

Rocznik

2021

Identyfikatory

Zawartość wolumenu

Vol. 66, iss. 3
- artykuł: A Study on the Durability of Dimensionally Stable Electrode in High-Rate Electroplating Process Condition Using Accelerated Life Test (Park Sung Cheol, Jung Yeon Jae, Koo Seokbon, Lee Kee-Ahn, Son Seong Ho), s. 675--678
- artykuł: Development of Admixed Lubricant for Warm Die and Warm Compaction of High-Density PM Iron (Oh Min Chul, Ahn Byungmin), s. 679--682
- artykuł: Effects of ZrO2 and Al2O3 Addition on the Physical Properties of Cu-Mo-Cr Alloy by Liquid Phase Sintering (Cho Yeong-Woo, Sim Jae-Jin, Heo Sung-Gue, Kim Hyun-Chul, Lee Yong-Kwan, Byeon Jong-Soo, Lee Yong-Tak, Lee Kee-Ahn, Seo Seok-Jun, Park Kyoung-Tae), s. 683--687
- artykuł: High-Efficiency Cooling System Using Additive Manufacturing (Woo Yeong-Jin, Nam Dong-Ho, Lee Seok-Rok, Kim Eun-Ah, Lee Woo-Jin, Yang Dong-Yeol, Yu Ji-Hun, Park Yong-Ho, Lee Hak-Sung), s. 689--693
- artykuł: Influence of Si Addition on Oxide Growth of Al-6 mass%Mg Alloy Melts (Yoon Young-Ok, Ha Seong-Ho, Shah Abdul Wahid, Kim Bong-Hwan, Lim Hyun-Kyu, Kim Shae K.), s. 695--698
- artykuł: Effect of Cu Addition on Oxide Growth of Al-7 mass%Mg Alloy at High Temperature (Ha Seong-Ho, Shah Abdul Wahid, Kim Bong-Hwan, Yoon Young-Ok, Lim Hyun-Kyu, Kim Shae K.), s. 699--702
- artykuł: Microstructural Evolution of AlCuFeMnTi-0.75Si High Entropy Alloy Processed by Mechanical Alloying and Spark Plasma Sintering (Kim Minsu, Sharma Ashutosh, Chae Myoung Jin, Lee Hansung, Ahn Byungmin), s. 703--707
- artykuł: Morphology Control of One-Dimensional Gallium Nitride Nanostructures by Modulating the Crystallinity of Sacrificial Gallium Oxide Templates (Ko Yun Taek, Park Mijeong, Park Jingyeong, Moon Jaeyun, Choa Yong-Ho, Lee Young-In), s. 709--712
- artykuł: Laser Cladding of WC/T-800 Cermet: Fabrication, Microstructure and Wear Properties (Kim Kyoung-Wook, Kim Young-Kyun, Park Sun-Hong, Lee Kee-Ahn), s. 713--717
- artykuł: Application of Artificial Neural Network to Predict the Tensile Properties of Dual-Phase Steels (Shin Seung-Hyeok, Kim Sang-Gyu, Hwang Byoungchul), s. 719--723
- artykuł: Enhanced Energetic Performance of Polyvinylidene Fluoride-Coated Zirconium Particle (Heo Won Young, Bae Sung Hwa, Son Injoon), s. 725--728
- artykuł: Effect of Impurity Reduction on Mechanical Properties of Fe29.5Ti70.5 Alloy Prepared by Pretreated Ti Scraps (Yoo Suhwan, Oh Jung-Min, Yang Jaeyeol, Yoon Jaesik, Lim Jae-Won), s. 729--733
- artykuł: Effect of Milling Duration on Oxide-Formation Behavior of Oxide-Dispersion-Strengthened High-Entropy Alloys (Song Yongwook, Kim Daeyoung, Nam Seungjin, Lee Kee-Ahn, Choi Hyunjoo), s. 735--740
- artykuł: Selective Cu Electrodeposition on Micrometer Trenches Using Microcontact Printing and Additives (Shim Jinyong, Lee Jinhyun, Yoo Bongyoung), s. 741--744
- artykuł: A Novel Process for Recovery of Key Elements from Commercial Cathode Material of End-of-Life Lithium-Ion Battery (Wang Jei-Pil), s. 745--750
- artykuł: Loading Effect of Ag Nanoparticles on Photocatalytic Activity of TiO2 Nanorod Arrays Prepared by Hydrothermal Method (Lee Kwangmin, Yoo Daeheung, Zakiyuddin Ahmad), s. 751--754
- artykuł: Growth Temperature Effect of Atomic-Layer-Deposited GdOx Films (Ryu Sung Yeon, Yun Hee Ju, Lee Min Hwan, Choi Byung Joon), s. 755--758
- artykuł: Effect of Sintering Holding Time and Cooling Rate on the Austenite Stability and Mechanical Properties of Nanocrystalline FeCrC Alloy (Kim Gwanghun, Jeon Junhyub, Seo Namhyuk, Choi Seunggyu, Oh Min-Suk, Son Seung Bae, Lee Seok-Jae), s. 759--763
- artykuł: Change In Microstructure and Mechanical Properties Of Four-Layer Stack ARB Processed Complex Aluminum Sheet with Annealing (Jo Sang-Hyeon, Lee Seong-Hee), s. 765--770
- artykuł: Synthesis of Silica Microspheres Containing Iron Oxide Nanoparticles for Removal of Organic Pollutant by Adsorption and Photocatalytic Decomposition (Cho Young-Sang, Sung Sohyeon), s. 771--776
- artykuł: Evaluating the Durability of SiC-Coated Carbon Composites Under Thermal Shock Conditions (Lee Ji Eun, Bae Soo Bin, Cho Nam Choon, Lee Hyung Ik, Meng Zicheng, Lee Kee Sung), s. 777--782
- artykuł: Effect of Fe-Mn Solid Solution Precursor Addition on Modified AA 7075 (Kim Min Sang, Kim Dae Young, Kim Young Do, Choi Hyun Joo, Kim Se Hoon), s. 783--787
- artykuł: Microstructural Characteristics of Ti-Al-Dy Alloy Produced by High Energy Ball Milling (Kim Yuri, Rhee Hoseong, Chang Si Young), s. 789--783
- artykuł: Direct Energy Deposition of Mo Powder Prepared by Electrode Induction Melting Gas Atomization (Roh Goo-Won, Park Eun-Soo, Moon Jaeyun, Lee Hojun, Byun Jongmin), s. 795--798
- artykuł: Synthesis of Y2O3-Dispersed W Powders Prepared by Ultrasonic Spray Pyrolysis and Polymer Solution Route (Jo Hyeonhui, Lee Young-In, Suk Myung-Jin, Jeong Young-Keun, Oh Sung-Tag), s. 799--802
- artykuł: Reduction of Thermal Conductivity Through Complex Microstructure by Dispersion of Carbon Nanofiber in p-Type Bi0.5Sb1.5Te3 Alloys (Sharief P., Madavali B., Sohn Y., Han J. H., Song G., Hong S. J.), s. 803--808
- artykuł: Chemical and Mineralogical Analysis of Reformed Slag During Iron Recovery from Copper Slag in the Reduction Smelting (Erdenebold Urtnasan, Wang Jei-Pil), s. 809--818
- artykuł: Comparative Studies on a Chamfer Technology and a Convex Roll Technology During the Soft Reduction Process (Zong Nanfu, Jing Tao, Liu Yang), s. 819--829
- artykuł: Evaluation of the Mechanical and Electrical Properties of Spark Plasma Sintered Titanium Carbide Reinforced Alumina Ceramic Composite (Selvakumar G., Prakash S. Ram, Rajkumar K.), s. 831--838
- artykuł: Welding and Corrosion Behavior of AISI H13 Welds: The Effect of Filler Metal on the Microstructural Evolutions (Varmaziar Sadegh, Mostaan Hossein, Rafiei Mahdi, Yeganeh Mahdi), s. 839--846
- artykuł: A study on the Surface Roughness of Galvannealed Low Carbon Al-Killed and Ti-Nb Stabilized Interstitial Free Steels (Elkoca Sen Candan, Ekmekci Bulent, Elkoca Oktay), s. 841--857
- artykuł: Effect of Laser Surface Melting on Microstructure of Cold Sprayed Ni20Cr Coatings (Soboń D.), s. 853--860
- artykuł: Study on Synthesis and Modification of Conical Ni Structures by One-Step Method (Skibińska K., Semeniuk S., Kutyła D., Kołczyk-Siedlecka K., Jędraczka A., Żabiński P.), s. 861--869
- artykuł: Influence of nano TiO2/Micro (SiC/B4C) Reinforcement on the Mechanical, Wear and Corrosion Behaviour of A356 Metal Matrix Composite (Paulraj D., Jeyakumar Palanisamy D., Rajamurugan G., Krishnasamy Prabu), s. 871--880
- artykuł: Comparative Study on Mechanical Performances of Circular and Flat Geometry Welds in Friction Stir Welding of Aluminium Alloy (Senthil S. M., Ragu Nathan Seerangan, Parameshwaran Rathinasamy, Bhuvanesh Kumar M.), s. 881--886
- artykuł: Optimization of Process Parameters of Ultrasonic Welding on Dissimilar Metal Joints (Mohan Kumar Anand, Rajasekar R., Karthik Vaduganathan, Kheawhom Soorathep), s. 887--892
- artykuł: Influence of Dual Filler Reinforcement on the Curing and Tribo-Mechanical Behaviour of Natural Rubber Nanocomposite for Tire Tread Application (Harikrishna Kumar M., Subramaniam Shankar, Rajasekar Rathanasamy, Pal Samir Kumar, Palaniappan Sathish Kumar), s. 893--899
- artykuł: A Frontier Statistical Approach Towards Online Tool Condition Monitoring and Optimization for Dry Turning Operation of SAE 1015 Steel (Moganapriya Chinnasamy, Rajasekar Rathanasamy, Gobinath Velu Kaliyannan, Prabhakaran Paramasivam, Jaganathan Saravana Kumar), s. 901--909
- artykuł: Chemically Modified Cellulose Capped Zinc Oxide Nanocomposite: Spectral and Optical Properties (Jagadeeswari R., Selvakumar P., Jeevanantham V., Saravanan R.), s. 911--915
- artykuł: Microstructural Characterization of Ni-Based B4C Reinforced Composite Coating Produced by Tungsten Inert Gas Method (Kılıç Musa), s. 917--924

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.