One Part Method for Making Geopolymer Paste using Flocculated Sidoarjo Mud

• Autorzy: Syihabuddin Thilal , Ekaputri Januarti Jaya , Maulana Mahendra A. , Soemitro Ria Asih Aryani , Petrus Himawan Tri Bayu Murti , Chikako Fujiyama

Identyfikatory

DOI

10.24425/amm.2024.151406

• Języki publikacji: EN

Abstrakty

EN

Some efforts have proposed the utilization of Sidoarjo mud for geopolymer paste. However, the original dry mud in geopolymer concrete showed decreased compressive strength and increased required water. In this paper, the one-part method is proposed to reduce the water in the mixture. First, the mud was chemically flocculated. Then, the dry mud was mixed with fly ash, activated geothermal silicate, and sodium hydroxide mixture in solid form before then the distilled water was added. This reduced the required water to 50% compared to the two-part method. The flocculant sedimented heavy metal that resulted in higher compressive strength at a later age. At 28 days, dry flocculated mud showed higher compressive strength than the original dry mud, with a compressive strength of 13 MPa and 11 MPa, respectively. This is because of the increase of silica, alumina, and iron content from 70% in dry LUSI to 75% in dry flocculated mud.

Słowa kluczowe

EN

sidoarjo mud; flocculation; geothermal silicate; one-part geopolymer; geopolymer paste

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2024
• Tom: Vol. 69, iss. 4
• Strony: 1401--1406
• Opis fizyczny: Bibliogr. 28 poz., rys., tab.

Twórcy

autor

Syihabuddin Thilal

• Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

• https://orcid.org/0000-0001-9963-9370

autor

Ekaputri Januarti Jaya

• Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

• https://orcid.org/0000-0002-9547-8132

autor

Maulana Mahendra A.

• Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

• https://orcid.org/0000-0002-0933-1362

autor

Soemitro Ria Asih Aryani

• Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia

• https://orcid.org/0000-0003-3489-4068

autor

Petrus Himawan Tri Bayu Murti

• Universitas Gadjah Mada, Sleman, Indonesia

• https://orcid.org/0000-0001-9372-0784

autor

Chikako Fujiyama

• Yokohama National University, Yokohama, Japan

• https://orcid.org/0000-0002-8424-287X

Bibliografia

• [1] M.C.G. Juenger, F. Winnefeld, J.L. Provis, J.H. Ideker, Cem. Concr. Res. 41 (12), 1232-1243 (2011). DOI: https://doi.org/10.1016/j.cemconres.2010.11.012.
• [2] J.S. Damtoft, J. Lukasik, D. Herfort, D. Sorrentino, E.M. Gartner, Cem. Concr. Res. 38 (2), 115-127 (2008). DOI: https://doi.org/10.1016/j.cemconres.2007.09.008
• [3] A. Sivakrishna, A. Adesina, P.O. Awoyera, K.R. Kumar, Mater. Today Proc. 27, 54-58 (2020). DOI: https://doi.org/10.1016/j.matpr.2019.08.202
• [4] S. Anandaraj, J. Rooby, P.O. Awoyera, R. Gobinath, Constr. Build. Mater. 197, 862-870 (2019). DOI: https://doi.org/10.1016/j.conbuildmat.2018.06.090
• [5] G.S. Plumlee et al., United States Geol. Surv., (2008). DOI: https://doi.org/10.3133/ofr20081019
• [6] P. Risdanareni, A. Karjanto, J.J. Ekaputri, P. Puspitasari, F. Khakim, Mater. Sci. Forum 857, 377-381 (2016). DOI: https://doi.org/10.4028/www.scientific.net/MSF.857.377
• [7] A. Mazzini, F. Scholz, H.H. Svensen, C. Hensen, S. Hadi, Mar. Pet. Geol. 90, 52-66 (2018). DOI: https://doi.org/10.1016/j.marpetgeo.2017.06.018
• [8] A. Harijoko, H.W. Utama, S. Husein, Proc. 5th Indones. Int. Geotherm. Conv. Exhib. 2017, (August), 1-9 (2017).
• [9] ASTM International, ASTM C 618-12a Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. (2014), 1-5. DOI: https://doi.org/10.1520/C0618
• [10] D. Hardjito, Antoni, Asian Bull. Eng. Sci. Technol. 1 (1), 1-6 (2014). [Online]. Available: http://repository.petra.ac.id/17077/
• [11] Triwulan, J.J. Ekaputri, T. Adiningtyas, J. Teknol. dan Rekayasa Sipil 33 (3), 33-45 (2007).
• [12] Y. Bu, R. Ma, J. Du, S. Guo, H. Liu, L. Zhao, R. Soc. Open Sci. 7 (2) (2020). DOI: https://doi.org/10.1098/rsos.191230
• [13] J.J. Ekaputri, Triwulan, S. Junaedi, Fansuri, R.B. Aji, Mater. Sci. Forum 803, 63-74 (2015). DOI: https://doi.org/10.4028/www.scientific.net/MSF.803.63
• [14] T.C. Jennerjahn, I. Jänen, C. Propp, S. Adi, S.P. Nugroho, Estuar. Coast. Shelf Sci. 130, 152-160 (2013). DOI: https://doi.org/10.1016/j.ecss.2013.04.007
• [15] A. Mazzini, G. Etiope, H. Svensen, Earth Planet. Sci. Lett., 317-318, (May 2006), 305-318 (2012). DOI: https://doi.org/10.1016/j.epsl.2011.11.016
• [16] R.J. Zhang, Y. Qing Qiao, J. Jie Zheng, C. Qiang Dong, Acta Geotech. 16 (1), 279-301 (2021). DOI: https://doi.org/10.1007/s11440-020-00961-5
• [17] C.Q. Dong, R.J. Zhang, J.J. Zheng, W.H. Jiang, Appl. Clay Sci. 193, (October 2019), 105676 (2020). DOI: https://doi.org/10.1016/j.clay.2020.105676
• [18] D.I. Verrelli, D.R. Dixon, P. Scales, Colloids Surfaces A Physicochem. Eng. Asp. 348 (1-3), 14-23 (2009). DOI: https://doi.org/10.1016/j.colsurfa.2009.06.013
• [19] H. Wei, B. Gao, J. Ren, A. Li, H. Yang, Water Res. 143 (2015), 608-631 (2018). DOI: https://doi.org/10.1016/j.watres.2018.07.029
• [20] S. Diamond, E.B. Kinter, Transp. Res. Board Natl. Acad. Sci. (92), 83-102 (1965). [Online]. Available: http://onlinepubs.trb.org/onlinepubs/hrr/1965/92/92-006.pdf
• [21] I. Demers, J. Finch, E. El-Ammouri, Miner. Eng. 22 (5), 506-512 (2009). DOI: https://doi.org/10.1016/j.mineng.2009.01.004
• [22] W.W.A. Zailani, M.M.A. Abdullah, M.F. Arshad, D.D. Burduhos-Nergis, M.F.M. Tahir, IOP Conf. Ser. Mater. Sci. Eng. 877 (1) (2020). DOI: https://doi.org/10.1088/1757-899X/877/1/012017
• [23] R. Jun Zhang, C. Qiang Dong, Z. Lu, H. Fu Pu, Constr. Build. Mater. 228 (2019). DOI: https://doi.org/10.1016/j.conbuildmat.2019.116742
• [24] J.J. Ekaputri, Triwulan, J. Teor. Dan Terap. Bid. Rekayasa Sipil 20 (1), 1-10 (2013).
• [25] C. Fujiyama, D. Kanai, Y. Cui, Januarti Jaya Ekaputri, JCI 44 (1), 1090-1095 (2022).
• [26] R. Bayuaji, A.K. Yasin, T.E. Susanto, M.S. Darmawan, AIP Conf. Proc., 1887, (September), (2017). DOI: https://doi.org/10.1063/1.5003505
• [27] H.T.B.M. Petrus et al., J. Clean. Prod. 293 (2), 126143 (2021). DOI: https://doi.org/10.1016/j.jclepro.2021.126143
• [28] American Association State and H. and T. Officials, ASTM Int., 95, (Reapproved), 1-2, (2003), [Online]. Available: www.astm.org

Uwagi

The authors gratefully acknowledge financial support from the Institut Teknologi Sepuluh Nopember for this work, under the project scheme of the Publication Writing and IPR Incentive Program (PPHKI) 2022.