Creation and properties of the (Mn-N-O) layers on aluminium

• Autorzy: Serbiński W.
• Języki publikacji: EN

Abstrakty

EN

Purpose: Many methods are well-known for surface consolidation of aluminium alloys. Fabrication of the new surface layers on aluminium alloys with high hardness and good tribological properties are presented in this paper. Design/methodology/approach: In that aspect, the conception of creating the surface layers containing manganese, nitrogen and oxygen (Mn-N-O) on AlSi13Mg1CuNi alloy used in production of the internal-combustion engine pistons was considered and described. Findings: The (Mn-N-O) layers are structurally connected by diffusion with aluminium base, demonstrates a zonal microstructure with the surface hardness about 358 HV0.01. The (Mn-N-O) layers increase significant the wear resistance of AlSi13Mg1CuNi alloys in frictional association with grey cast iron (hardness 197 HB) and simultaneously decreases the corrosion resistance in 0.01 M solution H2SO4. Research limitations/implications: In the future tribological researches should be applied also another materials as anti-specimens, for example spheroidal cast iron with chromium or molybdenum coatings. Practical implications: The (Mn-N-O) surface layers can be recommended as the tribological layers limiting the abrasive wear of the machine parts made from aluminium alloys. Originality/value: In the article performed the fabrication method of the new (Mn-N-O) surface layers and its beneficial structural and tribological properties for increase the wear resistance of the aluminium alloys.

Słowa kluczowe

EN

surface treatment; Mn-N-O layers; tribology; corrosion

PL

obróbka powierzchniowa; warstwy powierzchniowe; trybologia; korozja

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2006
• Tom: Vol. 17, nr 1-2
• Strony: 397--400
• Opis fizyczny: Bibliogr. 15 poz., rys., tab., wykr.

Twórcy

autor

Serbiński W.

• Department of Materials Science and Technology, Mechanical Engineering Faculty, Gdańsk University of Technology, G. Narutowicza 11/12, 80-952 Gdańsk, Poland

Bibliografia

• [1] J.P. Celis, D. Drees, M.Z. Huq, P.Q. Wu, M. De Bonte, Hybrid processes - a versatile technique to match process requirements and coating needs, Surface and Coatings Technology113 (1999) 165-181.
• [2] United States Council for Automotive Research. About Specific Technologies. Cheaper Aluminum Would Allow Automakers to „Lighten Up”. Taken from the summer 1998 newsletter.
• [3] A.A. Voevodin, J.P. O`Neill, J.S. Zabinski, Nanocomposite Tribological Coatings for Aerospace Applications, Surface and Coatings Technology 116-119 (1999) 36-45.
• [4] B.S. Andersson, Vehicle tribology, 17th Leeds-Lyon Symposium on Tribology, Elsevier Tribology Series 18 (1991) 503-506.
• [5] P. Kurze, H.J. Kletze, Method of producing articles of aluminium, magnesium or titanoum with an oxide ceramic layer filled with fluorine polymers, US5487825 (1996).
• [6] V. Kot, S. Sitkaleyeva, New Aspect of Coating Formation on Aluminium and Aluminium Alloys Substrates, TS`93 Aachen, 3-5 March 1993, 333-336.
• [7] I. Apachitei, J. Duszczyk, Autocatalytic Nickel Coatings on Aluminium with Improved Abrasive Wear Resistance, Surface and Coatings Technology 132 (2000) 89-98.
• [8] C.M. Taylor, Automobile engine tribology-design considerations for efficiency and durability, Wear 221 (1998) 1-8.
• [9] W. Serbiński, The combined method of forming the surface layer on aluminium alloys, International Technical-Scientific Conference on: The influence of production technology on the state of surface layer SL'90, IBEN Gorzów Wlkp., Gorzów Wlkp.-Lubniewice, Poland, 15-19 October 1990, 349-355, (in Polish).
• [10] W. Serbiński, The Wear Resistance and Thermal Stability of the Manganese-Nitrogen-Oxygen Layers Created on Al-Si Alloy, Advances in Materials Science. Vol. 1, Nr 1 (1), (2001) 79-86.
• [11] Patent SE 8404761-2, 06 Nov. 1986.
• [12] Patent SE 8404762-0, 06 Nov. 1986.
• [13] Patent WO 86/01836, 27 March 1986.
• [14] T. Łubiński, Testing of friction dynamics on a tribometer PT-3/96, World Tribology Congress, Abstract of papers, London, 8-12 September 1997, 709.
• [15] W. Serbiński, The Creation and Investigation of the Wear Resistance Multicomponent Surface Layer on Aluminium Alloy. Surface Treatment V. Computer Methods and Experimental Measurements for Surface Treatment Effects. Seville 2001. Edit. C.A. Brebbia. Southampton, Boston: WIT Press 2001, 369-375.