The influence of welding heat input on the microstructure of joints of S1100QL steel in one-pass welding

• Autorzy: Nowacki J. , Sajek A. , Matkowski P.

Identyfikatory

DOI

10.1016/j.acme.2016.05.001

• Języki publikacji: EN

Abstrakty

EN

Microstructure transformations of a welded joint of the of quenched and tempered advanced high-strength S1100QL steel in relation to the heat input and its effect on the strength of the joint. The gas metal arc welding method was used with varying values of the heat input in the range from 5.5 to 7.1 kJ/cm. Metallographic examination, hardness, impact strength, and tensile strength tests were carried out. Innovative methodology of welding impact test using drop tower impact resistance tester, has been applied. Joints with strength higher than that of welded steel were created. The amount of heat input necessary to produce joints of S1100QL steel whose strength would be higher than that of parent material was determined. The advantages of using S1100QL steel were indicated and a method of one-pass welding that allows for production of joints of optimum strength parameters with the use of mismatched filler metals was presented. As the result of detailed weld cracking dynamics analysis of the S1100QL steel the course of joint deformation was determined as a function of time, loading force and impact energy. It was found that the dynamically loaded samples welded with lower heat input display higher limit of elasticity, which is manifested by higher loading forces and longer deformation time.

Słowa kluczowe

EN

gas metal arc welding; advanced high strength steels; weld microstructure; impact testing; welding heat input

PL

stal o wysokiej wytrzymałości; mikrostruktura spoiny; spawanie

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2016
• Tom: Vol. 16, no. 4
• Strony: 777--783
• Opis fizyczny: Bibliogr. 16 poz., rys., tab., wykr.

Twórcy

autor

Nowacki J.

• West Pomeranian University of Technology, Szczecin, Poland

autor

Sajek A.

• West Pomeranian University of Technology, Szczecin, Poland

autor

Matkowski P.

• Teleskop Ltd., ul. Belgijska 5, 66-470 Kostrzyn nad Odrą, Poland

Bibliografia

• [1] B. Alexandrov, K. Theis, M. Streitenberger, H. Herold, I. Martinek, Cold cracking in weldments of steel S 690 QT, Welding in the World 49 (5/6) (2005) 64–73.
• [2] H.L. Yi, K.Y. Lee, H.K.D.H. Bhadeshia, Stabilisation of ferrite in hot rolled d-TRIP steel, Materials Science and Technology 27 (2) (2011) 525–529.
• [3] R. Datta, D. Mukerjee, S. Jha, K. Narasimhan, R. Veeraraghavan, Weldability characteristics of shielded metal arc welded high strength quenched and tempered plates, Journal of Materials Engineering and Performance 11 (1) (2002) 5–10.
• [4] Z. Qingdong, C. Qiang, Z. Xiaofeng, A modified Johnson–Cook model for advanced high-strength steels over a wide range of temperatures, Journal of Materials Engineering and Performance 23 (12) (2014) 4336–4341.
• [5] G. Magudeeswaran, V. Balasubramanian, G. Madhusudhan Reddy, Effect of welding consumables on fatigue performance of shielded metal arc welded high strength, Q&T steel joints, Journal of Materials Engineering and Performance 18 (1) (2009) 49–56.
• [6] J. Hildebrandt, F. Werner, Change of structural condition of welded joints between high-strength fine-grained and structural steels, Journal of Civil Engineering and Management 10 (2) (2004) 87–95.
• [7] Y. Tao, G. Hongming, Z. Shenghu, S. Jingwei, W. Lin, The study on plasma-MIG hybrid arc behaviour and droplet transfer for mild steel welding, Reviews on Advanced Materials Science 33 (2013) 459–464.
• [8] J. Nowacki, S. Krajewski, P. Matkowski, PTA-GMA hybrid welding of UHSS steel in structures of large-scale, Archives of Materials Science and Engineering 71 (2) (2015) 53–62.
• [9] M. Mazar Atabaki, J. Ma, G. Yang, R. Kovacevic, Hybrid laser/ arc welding of advanced high strength steel in different butt joint configurations, Materials and Design 64 (2014) 573–587.
• [10] S. Krajewski, J. Nowacki, Dual-phase steels microstructure and properties consideration based on artificial intelligence techniques, Archives of Civil and Mechanical Engineering 14 (2) (2014) 278–286.
• [11] W. Ozgowicz, E. Kalinowska-Ozgowicz, Investigations on the impact strength of constructional high-strength Weldox steel at lowered temperature, Archives of Materials Science and Engineering 32 (2) (2008) 89–94.
• [12] M.S. Węglowski, M. Zeman, M. Łomozik, Physical simulation of weldability of Weldox 1300 steel, Materials Science Forum 762 (2013) 551–555.
• [13] M. Gáspár, A. Balogh, GMAW experiments for advanced (Q + T) high strength steels, Production Processes and Systems 6 (1) (2013) 9–24.
• [14] J. Nowacki, A. Sajek, P. Matkowski, Welding of MART steel with the use of matching fillers, Archives of Materials Science 70 (2) (2014) 77–86.
• [15] M. Pitrun, D. Nolan, D. Dunne, Diffusible hydrogen content in rutile flux-cored arc welds as a function of the welding parameters, Welding in the World 49 (1) (2004) 2–13.
• [16] M.S. Węglowski, M. Zeman, Prevention of cold cracking in ultra-high strength steel Weldox 1300, Archives of Civil and Mechanical Engineering 14 (2014) 417–424.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę