Experimental Investigation of Process Parameters in Drilling LM25 Composites Coated with Multi Wall Carbon Nano Tubes Using Sonication Process

• Autorzy: Sangeetha M. , Prakash S.

Identyfikatory

DOI

10.1515/amm-2017-0268

• Języki publikacji: EN

Abstrakty

EN

Aluminium based metal matrix composites are widely used in automobile components such as cardan shaft of Chevrolet corvette, disc brake and engine push rod. In this experiment a Hybrid Metal Matrix Composites (HMMC) are fabricated and drilled. Drilling is the process of making slots in disc brake and thread in the engine parts. The surface quality of the drilled specimen depends on the speed, feed, drill type and the thrust force. Thrust force plays the major role in drilling the specimen. In this experiment HMMCs are fabricated using two processes-called, sonication and casting. Sonication is the process of coating the carbon nanotubes over the silicon carbide particles (SiCp). Semisolid stir casting is used to reinforce the coated SiCp in the LM 25 alloy. A drilling process is performed on HMMC to analyse the extent to which the input parameters influence the thrust force and Ovality. The tools used for drilling are solid carbide tools of three different diameters. Taguchi’s experimental design is adopted for the drilling operation. A mathematical model is used to determine the influence of input parameters on the outputs thrust force and ovality. This paper proves the combination of N₃ , f₁ and d1 of the carbide tool results in the lowest value of thrust force and ovality while drilling HMMCs. In this work the HMMC is prepared by coating the abrasive nature, silicon carbide particle and there is a good interfacial bonding between the reinforced particle and matrix and the drilling process becomes smoother. The new being of this article is the treated ceramics, SiCp with carbon nanotubes. This HMMC shows the improved mechanical properties compared to other metal matrix composites surveyed in the literatures.

Słowa kluczowe

EN

drilling; feed rate; Hybrid Metal Matrix Composites; response surface methodology; sonication; thrust force

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 3
• Strony: 1761--1770
• Opis fizyczny: Bibliogr. 32 poz., rys., tab., wzory

Twórcy

autor

Sangeetha M.

• Sathyabama University, Research Scholar, Department of Mechanical Engineering, 600119 Chennai, India

autor

Prakash S.

• Sathyabama University, Professor and Dean, School of Mechanical Engineering, 600119 Chennai India

Bibliografia

• [1] V. Saravanan, P. R.Thyla, S. R. Balakrishnan, Bulletin of Materials Science 38, 2, 335-342 (2015).
• [2] L. Meena, A. Manna, S. S. Banwait, International Journal of Engineering and Innovative Technology 3, 341-345 (2013).
• [3] N. Muthukrishnan, J. P. Davim, Journal of Mechanical Engineering Research 3, 1, 15-24 (2011).
• [4] C. Velmurugan, G. Saravanan, K. Shanmugasundaram, OSR Journal of Mechanical and Civil Engineering [IOSR-JMCE]. e-ISSN: 2278-1684, p-ISSN: 2320-334X, 88-92 (2014).
• [5] A. Rutecka, Z. L. Kowalewski, K. Makowska, K. Pietrzak, L. Dietrich, Archives of Metallurgy and Materials, 60, issue, Doi: 10.1515/amm-2015-0018, (2015).
• [6] J. Wieczorek, Archives of Metallurgy and Materials, 60, issue, Doi: 10.1515/amm-2015-0018, (2015).
• [7] S. Amiri, A. Rahimi, Iranian Polymer Journal, Print ISSN1026-1265, Online ISSN1735-5265, 1-19 (2016).
• [8] J. P. Davim, Journal of Materials Processing Technology, Elsevier Sc. 132, 250-254 (2003).
• [9] J. P. Davim, Journal of Process Mechanical Engineering, Proc. Instn. Mech. Engrs. Part E 215, 177-183 (2001).
• [10] T. Rajmohan, K. Palanikumar, J. P. Davim, Journal of Materials Science & Technology 28, 761-768 (2012).
• [11] A. Muniaraj, S. L. Das, K. Palanikumar, International Journal of Latest Research in Science and Technology 2, 4-8 (2013).
• [12] P. Suresh, K. Marimuthu, S. Ranganathan, T. Rajmohan, Transactions of Nonferrous Metals Society of China 24, 2805-2814 (2014).
• [13] S. Basavarajappa, G. Chandramohan, P.J. Davim, Journal of Materials Processing Technology 196, 332-338 (2008).
• [14] G. Tosun, M. Muratoglu, Composites Science and Technology 64, 299-308 (2004).
• [15] J. P. Davim, A. Monteiro Baptista, Journal of Materials Processing Technology, Elsevier Sc. 103, 417-423 (2000).
• [16] J. P. Davim, C. A. Conceicao Antonio, International Journal of Machine Tools and Manufacture, Elsevier Sc. 41, 21-31(2001).
• [17] M. Ramulu, P. N. Rao, H. Kao, Journal of Materials Processing Technology 124, 244-254 (2002).
• [18] B. M. Umesh Gowda, H. V. Ravindra, H. R. Gurupavan, G. Ugrasen, G. V. Naveen Prakash, Procedia Material Science 5, 2207-2214 (2014).
• [19] A. Mahamani, Procedia Materials Science 6, 950-960 (2014).
• [20] A. Pramanik, L. C. Zhang, G. A. Arsecularatne, International Journal of Machine Tools and Manufacture 48, 1613-1625 (2008).
• [21] P. Jayaraman, L. Mahesh Kumar, Procedia Engineering 97, 197-204 (2014).
• [22] B. Shivapragash, K. Chandrasekaran, C. Parthasarathy, M. Samuel, International Journal of Modern Engineering Reserch [IJMER] 3, 765-768 (2013).
• [23] K. Taskesen, K. Kutukde, Transaction of nonferrous Metals Society of China. 23, 2524-2536 (2012).
• [24] R. Ganesh, K. Chandrasekaran. Materials and Technology 48, 563-569 (2014).
• [25] Javadi, S. Mirdamadi, M. Faghisani, M. Shakhesi, Engineering and Technology 59, 16-22, (2011).
• [26] J. P. Davim, Machining of Metal Matrix Composites, Springer, London, ISBN: 978-0-85729-937-6, (2011).
• [27] A. Ashok, H. S. Maharana, A. Basu, Bulletin of Materials Science 38, 335-342, (2015).
• [28] L. H. Manjunatha, P. Dinesh, International Journal of Innovative Research in Science, Engineering and Technology 2, 500-507, (2013).
• [29] S. Charles, V. P. Arunachalam, Indian Journal of Engineering and Material Science 11, 473-480, (2004).
• [30] P. Gupta, D. Kumar, O. Parkash, A.K. Jha, Bulletin of Materials Science 39, 1, 299-305, (2013).
• [31] J. P. Davim, Machining Composite Materials, ISTE-Wiley, London, ISBN: 978-1-84821-103-4, (2009).
• [32] S. Kawashima, J.-W. Ted Seo, D. Corr, M. C. Hersam, S. P. Shah, Materials and Structures, DOI 10.1617/s11527-013-0110-9, (2013).

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).