Numerical analysis of the stress-strain state of a rope strand with linear contact under tension and torsion loading conditions

• Autorzy: Kalentev E. , Václav S. , Božek P. , Tarasov V. , Korshunov A.

Identyfikatory

DOI

10.12913/22998624/71181

• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of a numerical analysis of the stress-strain state of a rope strand with linear contact under tension and torsion loading conditions. Calculations are carried out using the ANSYS software package. Different approaches to calculation of the stress-strain state of ropes are reviewed, and their advantages and deficiencies are considered. The analysis of the obtained results leads us to the conclusion that the proposed method can be used in engineering calculations.

Słowa kluczowe

EN

numerical analysis; stress-strain state; rope

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2017
• Tom: Vol. 11, no 2
• Strony: 231--239
• Opis fizyczny: Bibliogr. 15 poz., fig., tab.

Twórcy

autor

Kalentev E.

• Institute Mechanics Ural Branch of the Russian Academy of Sciences, T. Baramzina 34, 426067 Izhevsk, Russia

autor

Václav S.

• Slovak University of Technology, Faculty of Material Science and Technology, J. Bottu 25, 91724 Trnava, Slovak Republic

autor

Božek P.

• Slovak University of Technology, Faculty of Material Science and Technology, J. Bottu 25, 91724 Trnava, Slovak Republic

autor

Tarasov V.

• Institute Mechanics Ural Branch of the Russian Academy of Sciences, T. Baramzina 34, 426067 Izhevsk, Russia

autor

Korshunov A.

• Institute Mechanics Ural Branch of the Russian Academy of Sciences, T. Baramzina 34, 426067 Izhevsk, Russia

Bibliografia

• 1. Peterka P., Krešák J., Kropuch S., Fedorko G., Molnar V. and Vojtko M. Failure analysis of hoisting steel wire rope. Eng. Fail. Anal., 45, 2014, 96–105.
• 2. Gajdos I., Slota J., Spisak E., Jachowicz T. and Tor- Swiatek A. Structure and tensile properties evaluation of samples produced by Fused Deposition Modeling. Open Engineering 2016, 6 (1), 86–89.
• 3. Molnár V., Boroška J. and Dečmanová J. Mechanical properties of steel rope wires -– quality test assurance. Acta Montan. Slovaca, 15, 2010, 23–30.
• 4. Stanova E., Fedorko G., Kmet S., Molnar V. and Fabian M. Finite element analysis of spiral strands with different shapes subjected to axial loads. Adv. Eng. Softw., 83, 2015, 45–58.
• 5. Madáč K., Durkáč V. and Kráľ J. Design of applications for CAD system Creo Parametric 1.0. Int. Sci. Her., 4, 2012, 278–284.
• 6. Debski H., Koszalka G. and Ferdynus M. Application of FEM in the analysis of the structure of a trailer supporting frame with variable operation parameters. Eksploat. i Niezawodn. – Maint. Reliab., 14, 2012, 107–113.
• 7. Kmet S., Stanova E., Fedorko G., Fabian M. and Brodniansky J. Experimental investigation and finite element analysis of a four-layered spiral strand bent over a curved support. Eng. Struct., 57, 2013, 475–483.
• 8. Glushko M.F. Steel wire hoisting ropes. Technika, Kiev, 1966.
• 9. Musalimov V.M. Mechanics of Deformable Cable, St. Petersburg, 2005.
• 10. Dinnik A.N. Mining engineering articles. Ugletekhizdat, Moscow, 1966.
• 11. Getman I.P. and Ustinov Y.A. Concerning methods of ropes analysis. Strain-torsion problem, 2008, 81–90.
• 12. Taltykin V.S. Method validation for improvement of mining ropes durability with regard to contact interaction of wires, (2009).
• 13. Erdönmez C. and İmrak C.E. Modeling and numerical analysis of the wire strand. J. Nav. Sci. Eng., 5, 2009, 30–38.
• 14. Goryacheva I.G. and Dobychin M.N. Contact problems in tribology. Engineering, Moscow, 1988.
• 15. Božek P. and Pivarčiová E. Flexible manufacturing system with automatic control of product quality, Strojarstvo, 55(3), 2013, 211-221.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)