Machine vision detection of the circular saw vibrations

• Autorzy: Sandak J. , Orlowski K. A.

Identyfikatory

DOI

10.5604/01.3001.0012.4617

• Języki publikacji: EN

Abstrakty

EN

Dynamical properties of rotating circular saw blades are crucial for both production quality and personnel safety. This paper presents a novel method for monitoring circular saw vibrations and deviations. A machine vision system uses a camera and a laser line projected on the saw’s surface to estimate vibration range. Changes of the dynamic behaviour of the saw were measured as a function of the rotational speed. The critical rotational speed of the circular saw blade as well as the optimal rotational speed of the saw were detected.

Słowa kluczowe

EN

circular saw blade; vibrations; machine vision system; supervising; critical rotational speed

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2018
• Tom: Vol. 18, No. 3
• Strony: 67--77
• Opis fizyczny: Bibliogr. 26 poz., rys.

Twórcy

autor

Sandak J.

• Innorenew CoE Renewable Materials and Healthy Environments Research and Innovation Centre of Excellence, Isola, Slovenia
• Trees and Timber Institute CNR-IVALSA, San Michele All’Adige, Italy

autor

Orlowski K. A.

• Gdansk University of Technology, Faculty of Mechanical Engineering, Department of Manufacturing Engineering and Automation, Poland

Bibliografia

• [1] SCHAJER G.S., 1986, Simple formulas for natural frequencies and critical speeds of circular saws, Forest Product Journal, 36/2, 37-43.
• [2] STAKHIEV Y.M., 1998, Research on circular saws vibration in Russia: from theory and experiment to the needs of industry, Holz als Roh- und Werkstoff, 56, 131-137.
• [3] DROBA A., JAVOREK L., SVOREŇ J., 2015, New design of circular saw blade body and its influence on critical rotational speed, DREWNO, 58/194, 147-157.
• [4] KACZMAREK A., ORLOWSKI K.A., JAVOREK L., 2016, A brief review and comparison of chosen experimental methods for measurements of natural frequencies of circular saw blades, DREWNO, 59/197, 231-239.
• [5] LI S.Y., WANG S.Y., ZHENG L.J., WANG Y.J., XU X.P., DING F., 2016, Dynamic stability of cemented carbide circular saw blades for woodcutting, Journal of Materials Processing Technology, December, 238, 108-123.
• [6] SCHAJER G.S., 1984, Understanding saw tensioning, Holz als Roh- und Werkstoff, 42/11, 425-430.
• [7] STAKHIEV Y.M., 2004, Coordination of saw blade tensioning with rotation speed: myth or reality?, Holz als Roh- und Werkstoff, 62, 313-315.
• [8] MERHAR M., BUCAR D.G., PEPELNJAK T., 2017, Dynamic behaviour analysis of a commercial roll-tensioned circular sawblade, BIORESOURCES, 12/3, 5569-5582.
• [9] CRISTÓVÃO L., EKEVAD M., GRÖNLUND A., 2012, Natural frequencies of roll-tensioned circular sawblades: effects of roller loads, number of grooves, and groove positions, BIORESOURCES, 7/2, 2009-2219.
• [10] HEISEL U., STEHLE T., GHASSEMI H., 2015, Experimental investigation into parameters influencing roll tensioning of circular saw blades, Journal of Machine Engineering, 15/1, 98-111.
• [11] IWATA H., HASHIMOTO K., MASUDA M., YOSHIDA, Y., 2003, Study on new tensioning method using internal pressure, Proc. of the 16th Inter. Wood Machining Seminar, Matsue, Japan, Part 2, Poster presentations, 627-635.
• [12] MÜNZ U.V., THIESSEN, B., 2003, Straightening and tensioning of hardness circular saw blades by laser beam, In: Proc. of the 16th International Wood Machining Seminar, Matsue, Japan, Part 1: Oral presentations, 234-247.
• [13] MÜNZ U.V., 2005, Vibration behavior and residual manufacturing stresses of circular sawblades, Proc. of the 17th International Wood Machining Seminar, 26-28 Sept., Rosenheim, Germany, 1, 407-417.
• [14] LI L., CHAO S., BAOTIAN X., 2000, The restricting factors on the limiting rotary speed of the circular saw, Forestry Studies in China, 2/2, 85-90.
• [15] NISHIO S., MARUI E., 1996, Effects of slots on the lateral vibration of a circular saw blade, Elsevier, International Journal of Machine Tools and Manufacture, 36/7, 771-787.
• [16] NISHIO S., 2005, Stable sawblade TM, In: Proc. of the 17th International Wood Machining Seminar, 26-28 Sept., Rosenheim, Germany, 1, 418-420.
• [17] STAKHIEV Y.M., 2000, Today and tomorrow circular sawblades. Russian version, Holz als Roh- und Werkstoff, 58, 229-240.
• [18] SVOREŇ J., JAVOREK L., DROBA A., PAULINY D., 2015, Comparison of natural frequencies values of circular saw blade determined by different methods, Drvna Industrija, 66/2, 123-128.
• [19] CHABRIER P., MARTIN P., 1999, An overview of methods for monitoring circular saw blade preparation, Holz als Roh- und Werkstoff, 57,157-163.
• [20] INGIELEWICZ R., 1979, Methods of investigation of the statical stiffness of the initially stressed circular saws, Przemysl Drzewny, 8, (in Polish).
• [21] MOHAMMADPANAH A., HUTTON S.G., 2015, Flutter instability speeds of guided splined disks: An experimental and analytical investigation, Journal of Shock and Vibration, Article ID 942141, 8 pages, http://dx.doi.org/10.1155/2015/942141
• [22] MOHAMMADPANAH A., HUTTON S.G., 2017, Theoretical and experimental verification of dynamic behaviour of a guided spline arbor circular saw, Shock and Vibration, Article ID 6213791, 12 pages. https://doi.org/10.1155/2017/6213791
• [23] THALER T., BRIC I., BRIC R., POTOCNIK P., MUZIC P., GOVEKAR E., 2012, Characterization of band sawing based on cutting forces, Journal of Machine Engineering, 12/1, 41-54.
• [24] ALBRECHT D., STEHLE T., 2016, Measuring the dynamic twisting behaviour of saw blades in the kerf during the sawing process, Journal of Machine Engineering, 16/3, 76-87.
• [25] ORLOWSKI K., SANDAK J., TANAKA C., 2007, The critical rotational speed of circular saw; simple measurement method and its practical implementations, Journal of Wood Science, 53/5, 388-393.
• [26] ORLOWSKI K., HYVÄRINEN M., 2007, Determination of optimal rotational speeds of circular saws, Annals of Warsaw University of Life Science – SGGW, Forestry and Wood Technology, 62, 96-99.