Analysis of the fault tolerant induction motor drive system

• Autorzy: Klimkowski K. , Dybkowski M.
• Języki publikacji: EN

Abstrakty

EN

In the paper the influence of the chosen sensors faults (rotor speed and stator current sensors) to the properties of vector controlled induction motor drive system are tested. Faults detection algorithms based on the simple signals from internal control structure are developed. The simulation tests carried out in Matlab/SimPowerSystem software. The proposed solution can be successfully applied in the fault tolerant drive systems.

Słowa kluczowe

EN

fault tolerant control (FTC); induction motor drive; diagnostic system; sensor faults; DFOC; MRAS

• Wydawca: Wydawnictwo Politechniki Poznańskiej
• Czasopismo: Computer Applications in Electrical Engineering
• Rocznik: 2014
• Tom: Vol. 12
• Strony: 302--308
• Opis fizyczny: Bibliogr. 6 poz., rys.

Twórcy

autor

Klimkowski K.

• Wrocław University of Technology 50-372 Wrocław, ul. Smoluchowskiego 19

autor

Dybkowski M.

• Wrocław University of Technology 50-372 Wrocław, ul. Smoluchowskiego 19

Bibliografia

• [1] Orłowska-Kowalska T., "Sensorless induction motor drives", Wroclaw University of Technology Press, Wroclaw, Poland, 2003 (in Polish).
• [2] Dybkowski M., "Estimation of speed in a vector controlled induction motor drive -selected problems", Scientific Papers of the Institute of Electrical Machines, Drives and Measurements of Wroclaw Univ. of Technology, No. 67, ser. Monographs, No. 20, (2013), Wroclaw, Poland, 2003 (in Polish).
• [3] Khalaf Salloum Gaeid, Hew Wooi Ping "Fault tolerant control of induction motor", Modern Applied Science Vol. 5, No. 4; August 2011, pp 83-94.
• [4] Li Jiang, "Sensor fault detection and isolation using system dynamics identification techniques", PhD thesis, The University of Michigan, 2011.
• [5] K. S. Lee, J.-S. Ryu "Instrument fault detection and compensation scheme for direct torque controlled induction motor drivers", IEE Proc.-Control Theory Appl., Vol. 150, No. 4, 2003.
• [6] Klimkowski K., Dybkowski M., "An influence of the chosen sensors faults to the performance of induction motor drive system working in vector control method", Computer Applications in Electrical Engineering, Poznań, Poland, 2014 (in Polish).