Applications of newly developed nanostructural and microporous materials in biomedical, tissue and mechanical engineering

• Autorzy: Dobrzański L. A.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The purpose of the paper is to present the main results of own research in 3 principal aspects indicating that the research is up to date and modern. This relates to nanotechnologies, modern biomedical materials and rapid manufacturing techniques used for the production of, in particular, microporous materials applied for medical and dental purposes. The paper comprises the explanation of structural mechanisms and phase transformations taking place in newly created engineering nanostructural and microporous materials under the influence of the applied, advanced technological processes newly developed, and especially nanotechnological processes, using the most modern scientific and research equipment being at disposal of modern materials engineering, in particular with the common use of high-resolution transmission electron microscopy (HRTEM). The results of investigations into the formation of the structure and surface properties results according to a different thickness scale of coatings or surface zone, from several hundred nanometres to several millimetres, are presented in the paper, including PVD and CVD coatings and laser treated surface on the steels and light alloys substrates. The paper also describes the nanostructural effects in solid materials, and especially the counteraction of cracking of new-developed high-manganese austenite steels Fe-Mn-Si-Al by twinning or/and martensitic transformation induced by the cold plastic deformation. The article also outlines the results of research of the development of special micro and nanocomposite materials designed mainly for use in regenerative medicine and regenerative dentistry. The studies of the structure and the properties of newly obtained materials and originally developed technologies are included to present the author’s contribution into materials science, nanotechnology, surface engineering and biomedical engineering including the usefulness of the newly developed nanoengineering materials and their applicability, in particular, in regenerative medicine, as well as tissue engineering. The described outcomes of the research constitute a basis for creating, apart from rigid porous implant-scaffolds, an innovative generation of rigid and elastic biological-engineering composite materials for regenerative medicine. Design/methodology/approach: The article discusses the key aspects of own research performed over the last decade in scope of nanotechnologies, modern biomedical materials and rapid manufacturing techniques used for the fabrication of, in particular, microporous materials applied for medical and dental purposes. The conditions for the performance of the research according to the scope mentioned were ensured by implementation of investment projects for constructing and equipping research and didactic laboratories in scope of nanotechnology, technologies of material processes and computational materials science, including LANAMATE (2010-2014) and MERMFLEG (2010-2013), and also BIOFARMA (2010-2012). Practical implications: The obtained materials and technologies are of high practical importance, which was confirmed in many cases with the results of laboratory tests and investigations at a semi-technical scale, and in some cases with the initiation of implementation works. The results of research in scope of bioengineering and dental engineering may find their applications in tissue engineering, in bone surgery, for threedimensional tissue scaffolds and in dentistry or oncology, to replace the natural tissue removed because of a cancer with the possibility of applying a therapeutic agent. Originality/value: The present paper is the original report from a personal own research and explains the concept, scope and results of own research of a new obtained microporous and nanostructural materials and coatings, including hybride solid-porous products and newly obtained materials processing and additive technologies. Some of the mentioned research results are protected by patents or patent applications, and many of them were awarded over 60 prizes and medals at international fairs of innovation, invention and rationalisation in many countries.

Słowa kluczowe

EN

nanostructural material; porous material; biomaterials; surface engineering; coatings; laser treatment; Selective Laser Sintering; TWIP; TRIP; bioengineering; tissue engineering; regenerative medicine; stomatology; implant; scaffold; biological engineering; composite materials; additive technologies

PL

materiał nanostrukturalny; materiał porowaty; biomateriały; inżynieria powierzchni; powłoki; leczenie laserem; selektywne spiekanie laserowe; TWIP; TRIP; bioinżynieria; inżynieria tkankowa; medycyna regeneracyjna; stomatologia; implant; rusztowanie; materiały kompozytowe

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2015
• Tom: Vol. 76, nr 2
• Strony: 53--114
• Opis fizyczny: Bibliogr. 468 poz.

Twórcy

autor

Dobrzański L. A.

• Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] N. Taniguchi, On the Basic Concept of 'NanoTechnology', Proc. Intl. Conf. Prod. Eng., Part II, Japan Society of Precision Engineering, Tokyo, 1974.
• [2] European Society for Precision Engineering and Nanotechnology, Lifetime Achievement Award, http://www.euspen.eu/Home/LifetimeAchievementA ward.aspx, Access in: 2.12.2015.
• [3] J. Gribbin, M. Gribbin, Richard Feynman: A Life in Science, Penguin Books, Dutton, 1997, 170.
• [4] NNDB, Richard Feynman, Soylent Communications, 2014, http://www.nndb.com/people/584/ 000026506/, Access in: 3.12.2015.
• [5] K.E. Drexler, Engines of Creation: The Coming Era of Nanotechnology with a foreword by Marvin Minsky, Anchor Pr., Doubleday, New York, 1986.
• [6] K.E. Drexler, Nanosystems: Molecular Machinery, Manufacturing, and Computation, John Wiley & Sons, Inc., New York, 1992.
• [7] United States National Nanotechnology Initiative, What is Nanotechnology?, http://www.nano.gov/ nanotech-101/what/definition, Access in: 1.12.2015.
• [8] Commission Recommendation of 18 October 2011 on the definition of nanomaterial (2011/696/EU), Official Journal of the European Union, 20.10.2011, http://eur-lex.europa.eu/legal-content/EN/TXT/PDF /?uri=CELEX:32011H0696&from=PL, Access in: 1.12.2015.
• [9] United States National Nanotechnology Initiative, Manufacturing at the Nanoscale, http://www.nano. gov/nanotech-101/what/manufacturing, Access in: 1.12.2015.
• [10] United States National Nanotechnology Initiative, NNI Supplement to the President’s 2015 Budget, http://www.nano.gov/node/1128, Access in: 1.12. 2015.
• [11] A. Arsiwala, P. Desai, V. Patravale, Recent advances in micro/nanoscale biomedical implants, Journal of Controlled Release 189 (2014) 25-45.
• [12] D. Lambrick, World Artificial Organs Market by 2017, MarketandMarkets, 2014, Available from: http://www.powershow.com/view0/608c4e-YjNiM/ World_Artificial_Organs_Market_by_2017_powerp oint_ppt_presentation, Access in: 1.12.2015.
• [13] P. Zorlutuna, N. Annabi, G. Camci-Unal, M. Nikkhah, J.M. Cha, J.W. Nichol, A. Manbachi, H. Bae, S. Chen, A. Khademhosseini, Microfabricated Biomaterials for Engineering 3D Tissues, Advanced Materials 24/14 (2012) 1782-1804.
• [14] F. Yang, W.L. Neeley, M.J. Moore, J.M. Karp, A. Shukla, R. Langer, Tissue Engineering: The Therapeutic Strategy of the Twenty-First Century, in: C.T. Laurencin, L.S. Nair (eds.), Nanotechnology and Tissue Engineering: The Scaffold, CRC Press Taylor & Francis Group, Boca Raton, FL, 2008, 3-32.
• [15] Y.C. Fung, A Proposal to the National Science Foundation for An Engineering Research Center at UCSD, Center for the Engineering of Living Tissues, UCSD #865023, 2001.
• [16] R.P. Lanza, R. Langer, J. Vacanti (eds.), Principles of Tissue Engineering, Academic Press, San Diego, 2000.
• [17] A. Atala, R.P. Lanza (eds.), Methods of Tissue Engineering, Academic Press, San Diego, 2002.
• [18] S. Tomioka, A. Okazaki, Japanese 1st to seek patent for 3-D printing back in 1980s, but still lost out, 15.08.2014, http://ajw.asahi.com/article/behind_ news/social_affairs/AJ201409150037, Access in: 2.12.2015.
• [19] C.W. Hull, Apparatus for Production of ThreeDimensional Objects by Stereolithography, Patent US 4575330A, 8.08.1984.
• [20] D.H. Freedman, Layer by Layer, Technology Review 115/1 (2012) 50-53. [21] C.K. Chua, K.F. Leong, C.S. Lim, Rapid Prototyping, 2nd Edition, World Scientific, 2003, 124.
• [22] L.A. Dobrzański, G. Matula, Powder metallurgy fundamentals and sintered materials, International OCSCO World Press, Gliwice, Open Access Library 8/14 (2012) 1-156 (in Polish).
• [23] L.A. Dobrzański, Powder Metallurgy, in preparation for print.
• [24] J. Rifkin, The Third Industrial Revolution, http://thethirdindustrialrevolution.com/, Access in: 1.12.2015.
• [25] A third industrial revolution, The Economist, 21.04. 2012, http://www.economist.com/node/21552901, Access in: 1.12.2015.
• [26] L.A. Dobrzański et al., The Scientific-Didactic Laboratory of the Nanotechnology and Materials Technology in Gliwice, LANAMATE, Project UDAPOIS.13.01-057/08-00, Silesian University of Technology, Gliwice, 2010-2013.
• [27] L.A. Dobrzański et al., Modernisation and equipping of the research and forming laboratories of the engineering materials in Gliwice, MERMFLEG, Project UDA-RPSL.08.01.00-00-044/09-00, Silesian University of Technology, Gliwice, 2010-2012.
• [28] L.A. Dobrzański et al., The Task L102 of the Project: Silesian BIO-FARMA, Centre of the Biotechnology, Bioengineering and Bioinformatics, Silesian University of Technology, Gliwice, 2010-2012.
• [29] L.A. Dobrzański et al., Opening and development of engineering and PhD studies in the field of nanotechnology and materials science, INFONANO, Project UDA-POKL.04.01.01-00-003/09-00, Silesian University of Technology, Gliwice, 2009-2014.
• [30] L.A. Dobrzański et al., Improving the attractiveness of education at the macro-branch of study “Nanotechnology and Materials Processing Technology”, NANATRIM, Project UDA-POKL.04.01.02-00-066 /11-00, Silesian University of Technology, Gliwice, 2011-2015.
• [31] L.A. Dobrzański et al., Improving the attractiveness of education at the branch of study “Materials Engineering”, IMOTECH, Project UDA-POKL.04.01.02- 00-138/12-00, Silesian University of Technology, Gliwice, 2012-2015.
• [32] L.A. Dobrzański et al., Improving the attractiveness of education at the macro-branch of study “Applied Computer Science with Computational Materials Science”, QUAPINFO, Project UDA-POKL.04.01. 02-00-064/11-00, Silesian University of Technology, Gliwice, 2011-2015.
• [33] L.A. Dobrzański et al., Foresight of surface properties formation leading technologies of engineering materials and biomaterials, FORSURF, Project UDA-POIG.01.01.01-00.23/08-00, Silesian University of Technology, Gliwice, 2009-2012.
• [34] A.D. Dobrzańska-Danikiewicz, L.A. Dobrzański, Foresight of the Surface Technology in Manufacturing, in: A.Y.C. Nee (ed.), Handbook of Manufacturing Engineering and Technology, SpringerVerlag, London, 2015, 2587-2637.
• [35] A.D. Dobrzańska-Danikiewicz, Computer integrated development prediction methodology in materials surface engineering, International OCSCO World Press, Gliwice, Open Access Library 1/7 (2012) 1- 289 (in Polish).
• [36] A.D. Dobrzańska-Danikiewicz, E-foresight of materials surface engineering, Archives of Materials Science Engineering 44/1 (2010) 43-50.
• [37] A.D. Dobrzańska-Danikiewicz, Foresight of material surface engineering as a tool building a knowledgebased economy, Materials Science Forum 706-709 (2012) 2511-2516.
• [38] A.D. Dobrzańska-Danikiewicz, L.A. Dobrzański, J. Mazurkiewicz, B. Tomiczek, Ł. Reimann: Etransfer of materials surface engineering e-foresight results, Archives of Materials Science and Engineering 52/2 (2011) 87-100.
• [39] A.D. Dobrzańska-Danikiewicz, L.A. Dobrzański, A. Sękala: Results of Technology Foresight in the Surface Engineering Area, Applied Mechanics and Materials 657, 2014, pp. 916-920
• [40] L.A. Dobrzański, J. Trzaska, A.D. DobrzańskaDanikiewicz: Use of Neural Networks and Artificial Intelligence Tools for Modeling, Characterization, and Forecasting in Material Engineering, in: S. Hashmi (ed.): Comprehensive Materials Processing, G.F. Batalha (ed.): Vol. 2: Materials Modeling and Characterization, Elsevier Ltd., 2014, 161-198.
• [41] L.A. Dobrzański, M. Macek, B. Tomiczek, Effect of carbon nanotubes content on morphology and properties of AlMg1SiCu matrix composite powders, Archives of Materials Science and Engineering 69/1 (2014) 12-18.
• [42] L.A. Dobrzański, M. Macek, B. Tomiczek, W. Pakieła, M. Kremzer, Influence of the milling time and MWCNT content on the wear properties of the AlMg1SiCu/MWCNT nanocomposites, Archives of Materials Science and Engineering 74/2 (2015) 77-84.
• [43] L.A. Dobrzański, B. Tomiczek, M. Adamiak, K. Go- łombek, Mechanically Milled Aluminium Matrix Composites Reinforced with Halloysite Nanotubes, 14th International Materials Symposium, IMSP'2012, Proceedings, Denizli, Turkey, 2012, 781-788.
• [44] L.A. Dobrzański, B. Tomiczek, M. Adamiak, K. Go- łombek, Mechanically milled aluminium matrix composites reinforced with halloysite nanotubes, Journal of Achievements in Materials and Manufacturing Engineering 55/2 (2012) 654-660.
• [45] L.A. Dobrzański, B. Tomiczek, M. Adamiak, Manufacturing of EN AW6061 matrix composites reinforced by halloysite nanotubes, Journal of Achievements in Materials and Manufacturing Engineering 49/1 (2011) 82-89.
• [46] B. Tomiczek, L.A. Dobrzański, Composite materials based on AlMg1SiCu aluminium alloy reinforced with halloysite particles, Journal of Achievements in Materials and Manufacturing Engineering 61/1 (2013) 39-46.
• [47] L.A. Dobrzański, B. Tomiczek, M. Pawlyta, P. Nuckowski, TEM and XRD study of nanostructured composite materials reinforced with the halloysite particles, Materials Science Forum 783-786 (2014) 1591-1596.
• [48] L.A. Dobrzański, B. Tomiczek, G. Matula, K. Go- łombek, Role of halloysite nanoparticles and milling time on the synthesis of AA 6061 aluminium matrix composites, Advanced Materials Research 939 (2014) 84-89.
• [49] L.A. Dobrzański, B. Tomiczek, W. Pakieła, A.E. Tomiczek, Mechanical Properties and Wear Resistance of PM Composite Materials Reinforced with the Halloysite Particles, Advanced Materials Research 1127 (2015) 107-112.
• [50] L.A. Dobrzański, B. Tomiczek, M. Pawlyta, M. Król, Aluminium AlMg1SiCu matrix composite materials reinforced with halloysite particles, Archives of Metallurgy and Materials 59/1 (2014) 335-338.
• [51] B. Tomiczek, M. Kujawa, G. Matula, M. Kremzer, T. Tański, L.A. Dobrzański, Aluminium AlSi12 alloy matrix composites reinforced by mullite porous preforms, Materialwissenschaft und Werkstofftechnik 46/4-5 (2015) 368-376.
• [52] B. Tomiczek, M. Pawlyta, M. Adamiak, L.A. Dobrzański, Effect of milling time on microstructure of AA6061 composites fabricated via mechanical alloying, Archives of Metallurgy and Materials 60/2 (2015) 789-793.
• [53] L.A. Dobrzański, B. Tomiczek, M. Pawlyta, K. Go- łombek, EN AW-AlMg1SiCu alloy matrix composite materials reinforced with halloysite particles manufactured by mechanical milling, Inżynieria Materiałowa 35/2 (2014) 102-105.
• [54] B. Tomiczek (Advisor L.A. Dobrzański), Structure and properties of nanostructural composites reinforced with halloysite, PhD theses, Silesian University of Technology, Gliwice, 2013 (in Polish).
• [55] M. Kujawa (Advisor L.A. Dobrzański), Composite materials reinforced with sintered halloysite nanotubes infiltered with AlSi12 alloy, PhD theses, Silesian University of Technology, Gliwice, 2015 (in Polish).
• [56] M. Macek (Advisor L.A. Dobrzański), Structure and properties of aluminium nanocomposite material reinforced with carbon nanotubes, PhD theses submitted for evaluation, Silesian University of Technology, Gliwice (in Polish).
• [57] L.A. Dobrzański, B. Tomiczek, M. Adamiak, G. Matula, Nanostructural composite material with aluminium alloy matrix and method of its manufacture, Gold Medal on 15th Moscow International Salon of Inventions and Innovation Technologies «Archimedes», Moscow, Russia, 20-23.03.2012.
• [58] L.A. Dobrzański, B. Tomiczek, M. Adamiak, G. Matula, J. Sołtys, A nanostructural aluminium alloy matrix composite material reinforced with halloysite nanotubes and method of its manufacture, Gold Medal on The Belgian and International Trade Fair for Technological Innovation Brussels Eureka, Brussels, Belgium, 15-17.11.2012.
• [59] L.A. Dobrzański, B. Tomiczek, M. Adamiak, J. Soł- tys, G. Matula, A nanonstructural aluminum alloy matrix composite material reinforced with halloysite nanotubes, Gold Medal on VIII International Salon of Inventions and New Technologies "NEW TIME", Sevastopol, Ukraine, 27-29.09.2012.
• [60] L.A. Dobrzański, B. Tomiczek, M. Kremzer, J. Soł- tys, Infiltrated composite material with aluminium alloy matrix and method of its manufacture, Silver Medal on 40th International Exhibition of Inventions of Geneva, 2012, Switzerland 18-22.04.2012.
• [61] L.A. Dobrzański, B. Tomiczek, M. Kremzer, G. Matula, J. Sołtys, Infiltrated composite material with aluminium alloy matrix and method of its manufacture, Silver Medal on 7th International Exhibition of Inventions, Kunshan, China, 9-12.11.2012
• [62] L.A. Dobrzański, B. Tomiczek, M. Kremzer, G. Matula, M. Kałużna, J. Sołtys, Infiltrated composite material with aluminium alloy matrix ad method of its manufacture, Bronze Medal on International Innovation & Invention Expo, Macau, China, 28-30.06.2013.
• [63] L.A. Dobrzański, M. Macek, B. Tomiczek, Aluminium alloy matrix composite material reinforced with multiwalled carbon nanotubes, Leading Innovation Award on International Intellectual Property Network Forum, Taipei, Taiwan, 3.10.2015
• [64] L.A. Dobrzański, B. Tomiczek, M. Kremzer, G. Matula, J. Sołtys, Infiltrated composite material with aluminium alloy matrix and method of its manufacture, Bronze Medal on 6th International Warsaw Invention Show IWIS 2012, Warsaw, Poland, 16- 19.10.2012.
• [65] L.A. Dobrzański, M. Macek, B. Tomiczek, Aluminium alloy matrix composite material reinforced with multiwalled carbon nanotubes, Silver Medal on Taipei International Invention Show & Technomart, INST 2015, Taipei, Taiwan, 1-3.10.2015.
• [66] L.A. Dobrzański, B. Tomiczek, M. Adamiak, J. Sołtys, G. Matula, A nonstructural aluminum alloy matrix composite material reinforced with halloysite nanotubes and method of its manufacture, Bronze Medal on 8th Taipei International Invention Show & Technomart for Intellectual Property, Patents, Trademarks, Inventions, INST 2012, Taipei, Taiwan, 20-23.09.2012
• [67] L.A. Dobrzański, B. Tomiczek, M. Adamiak, G. Matula, J. Sołtys, A nanostructural composite material with aluminium alloy matrix reinforced with halloysite nanotubes, Bronze Medal on Malaysia Technology Expo MTE 2013, Kuala Lumpur, Malaysia, 21-23.02.2013.
• [68] L.A. Dobrzański, M. Macek, B. Tomiczek, Aluminium alloy matrix composite material reinforced with multiwalled carbon nanotubes, Bronze Medal on 13th International Innovation Exhibition, ARCA 2015, Zagreb, Croatia, 15-18.10.2015.
• [69] L.A. Dobrzański, B. Tomiczek, M. Kremzer, G. Matula, J. Sołtys, Composite material with casting aluminium alloys matrix and method for producing thereof, Patent Office Bulletin 40/12 (2012) 15. Patent description PL 217093, 2014
• [70] L.A. Dobrzański, B. Tomiczek, M. Adamiak, G. Matula, J. Sołtys, Nanostructure composite material with wrought aluminium alloy and method for production thereof, Patent Office Bulletin 40/22 (2012) 14-15, Patent description PL 216257, 2014.
• [71] L.A. Dobrzański, I. Czaja, Effect of nanowires and nanoparticles of copper on the structure and properties of the nanocomposite polymeric materials, Archives of Materials Science and Engineering 75/1 (2015) 18-29.
• [72] M. Król, M. Bilewicz, J.C. Viana, L.A. Dobrzański, The Thermomechanical Processing Conditions and the Mechanical Properties of Injection Molded PP/PC Blends, Materials Science Forum 587-588 (2008) 553-557.
• [73] L.A. Dobrzański, M. Górniak, Ł. Reimann, M. Staszuk, Characterization of aluminosilicate nanoparticles as a reinforcement in composite materials based on polymeric matrix, Journal of Achievements in Materials and Manufacturing Engineering 55/2 (2012) 239-244.
• [74] L.A. Dobrzański, M. Bilewicz, J.C. Viana, Polymer nanocomposites reinforced with montmorillonite, Archives of Materials Science and Engineering 53/1 (2012) 5-28.
• [75] L.A. Dobrzański, M. Bilewicz, J.C. Viana, Mechanical approach of PP/MMT polymer nanocomposite, Archives of Materials Science and Engineering 43/2 (2010) 94-100.
• [76] M. Bilewicz, J.C. Viana, L.A. Dobrzański, Polymer composite strengthening by developed injection moulding technique, Archives of Materials Science and Engineering 30/2 (2008) 69-72.
• [77] L.A. Dobrzański, M. Bilewicz, Influence of phyllosilicates 2:1 on structure of polymer nanocomposite, Journal of Achievements in Materials and Manufacturing Engineering 55/2 (2012) 644-653.
• [78] M. Bilewicz, L.A. Dobrzański, J.C. Viana, Morphological aspect of multilaminar PP composite, Journal of Achievements in Materials and Manufacturing Engineering 37/2 (2009) 598-606.
• [79] L.A. Dobrzański, M. Bilewicz, J.C. Viana, A. Cunha, Non-conventionally obtained polymer nanocomposites with different nano-clay ratios, Journal of Achievements in Materials and Manufacturing Engineering, 31/2 (2008) 212-217.
• [80] M. Bilewicz, J.C. Viana, L.A. Dobrzański, Development of microstructure affected by in-mould manipulation in polymer composites and nanocomposites, Journal of Achievements in Materials and Manufacturing Engineering 31/1 (2008) 71-76.
• [81] L.A. Dobrzański, M. Król, M. Bilewicz, J.C. Viana, Microstructure and mechanical properties of Polypropylene/Polycarbonate blends, Journal of Achievements in Materials and Manufacturing Engineering 27//1 (2008) 19-22.
• [82] M. Bilewicz, J.C. Viana, L.A. Dobrzański, Self reinforced polymer-polymer composites, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 43-46.
• [83] M. Bilewicz, J.C. Viana, A.M. Cunha, L.A. Dobrzański, Morphology diversity and mechanical response of injection moulded polymer nanocomposites and polymer-polymer composites, Journal of Achievements in Materials and Manufacturing Engineering 15/1-2 (2006) 159-165.
• [84] L.A. Dobrzański, A. Mucha, M. Macek, The influence of carbon nanotubes on the mechanical properties of nanocomposites, Archives of Materials Science and Engineering 68/2 (2014) 75-80.
• [85] M. Bilewicz (Advisor L.A. Dobrzański), Composite polymer layers manufactured sequentially by injection moulding with reciprocating flows, PhD theses, Silesian University of Technology, Gliwice, 2011 (in Polish).
• [86] M. Górniak (Advisor L.A. Dobrzański), The influence of organophilization of surface of halloysite nanotubes and montmorillonite nanoplates on properties of polymer, PhD theses, Silesian University of Technology, Gliwice, 2014 (in Polish).
• [87] I. Czaja (Advisor L.A. Dobrzański), Influence of copper nanowires and nanopowders on the structure and properties of nanocomposite polymer materials, PhD theses, Silesian University of Technology, Gliwice, 2015 (in Polish).
• [88] B. Nieradka-Buczek (Advisor L.A. Dobrzański), Influence of copper nanowires on thermal conductivity and absorption of radiation of polymer nanocomposites, PhD theses in progress, Silesian University of Technology, Gliwice (in Polish).
• [89] L.A. Dobrzański, J.C. Viana, M. Bilewicz, Nonconventional injection mould for obtaining highly reinforced polymer nanocomposites with controlled multilaminar structure, Gold Medal on 6th International Warsaw Invention Show IWIS 2012, Warsaw, Poland, 16-19.10.2012.
• [90] L.A. Dobrzański, M. Bilewicz, J.C. Viana, Multilaminar polymer nanocomposites Silver Medal on 9th Taipei International Invention Show & Technomart for Intellectual Property, Patents, Trademarks, Inventions, INST 2013, Taipei, Taiwan, 26-29.09.2013.
• [91] L.A. Dobrzański, M. Bilewicz, J.C. Viana, Multilaminar Polymer Nanocomposites, Silver Medal on 11th Inventions and Innovations Malaysia Technology Expo 2012 (MTE2012), Kuala Lumpur, Malaysia, 16-18.02.2012.
• [92] M. Bilewicz, L.A. Dobrzański, J. Viana, Nonconventional injection mould for obtained highly reinforced polymer nanocomposites with controlled multilaminar structure, Bronze Medal on 7th International Exhibition of Inventions, Kunshan, China, 9-12.11.2012.
• [93] L.A. Dobrzański, M. Bilewicz, Non-conventional injection mould for obtaining highly reinforced polymer nanocomposites with controlled multilaminar structure, Bronze Medal on 8th Taipei International Invention Show & Technomart for Intellectual Property, Patents, Trademarks, Inventions, INST 2012, Taipei, Taiwan, 20-23.09.2012.
• [94] L.A. Dobrzański, M. Bilewicz, J.C. Viana, Multilaminar polymer nanocomposites, Bronze Medal on 23rd International Invention, Innovation & Technology Exhibition "ITEX 2012", Kuala Lumpur, Malaysia, 17-19.05.2012.
• [95] A.D. Dobrzańska-Danikiewicz, D. Cichocki, M. Pawlyta, D. Łukowiec, W. Wolany, Synthesis conditions of carbon nanotubes with the chemical vapor deposition method, Physca Status Solidi B 251 (2014) 2420-2425.
• [96] A.D. Dobrzańska-Danikiewicz, D. Łukowiec, D. Cichocki, W. Wolany, Carbon nano¬tubes decorating methods, Archives of Materials Science and Engineering 61/2 (2013) 53-61.
• [97] A.D Dobrzańska-Danikiewicz, D. Łukowiec, M. Pawlyta, T. Gaweł, M. Procek, Resistance changes of carbon nanotubes decorated with platinum nanoparticles in the presence of hydrogen at different and constant concentrations, Physica Status Solidi B 251/12 (2014) 2426-2431.
• [98] A.D Dobrzańska-Danikiewicz, W. Wolany, G. Benke, Z. Rdzawski, Physica Status Solidi B 251/12 (2014) 2485-2490.
• [99] A.D. Dobrzańska-Danikiewicz, D. Cichocki, Encapsulation into carbon nanotubes, in: W.I. Milne, M. Cole, S. Mitura (eds.), Carbon Nanotechnology, One Central Press, Manchester, United Kingdom, 2015, in press.
• [100] A.D. Dobrzańska-Danikiewicz, D. Łukowiec, D. Cichocki, W. Wolany, Carbon nanotubes manufacturing using the CVD equipment against the background of other methods, Archives of Materials Science and Engineering 64/2 (2013) 103-109.
• [101] A.D. Dobrzańska-Danikiewicz, D. Cichocki, D. Łukowiec, W. Wolany, Synthesis of multi-walled carbon nanotubes by the Catalytic-Chemical Vapour Deposition method, Inżynieria Materiałowa 35/6 (2014) 477-480 (in Polish).
• [102] A.D. Dobrzańska-Danikiewicz, D. Cichocki, D. Łukowiec, W. Wolany, Carbon nano-tubes synthesis time versus their layer height, Archives of Materials Science and Engineering 69/1 (2014) 5-11.
• [103] A.D. Dobrzańska-Danikiewicz, D. Łukowiec, W. Wolany, Comparative analysis of the structure of nanocomposites consisting of MWCNTs and Pt, Re or Rh nanoparticles, in: W.I. Milne, M. Cole, S. Mitura (eds.), Carbon Nanotechnology, One Central Press, Manchester, United Kingdom, 2015, in press.
• [104] W. Wolany, A.D. Dobrzańska-Danikiewicz, G. Benke, Z. Rdzawski, The nanocomposite consisting of carbon nanotubes and the heat-resistant noble metal and the way of its manufacturing, Patent Application P. 407887, UP RP, 2014.
• [105] A.D. Dobrzańska-Danikiewicz, D. Cichocki, D. Łukowiec, The way of manufacturing and the application of the nanocomposite consisting of carbon nanotubes and rhodium nanoparticles, Patent Application P. 411443, UP RP, 2015.
• [106] A.D. Dobrzańska-Danikiewicz, D. Łukowiec, D. Cichocki, W. Wolany, Nanocomposites composed of carbon nanotubes coated with nanocrystals of noble metals, Open Access Library V/2 (2015) 1-131 (in Polish).
• [107] L.A. Dobrzański, A. Wierzbicka, A. Drygała, K. Lukaszkowicz, Influence of carbon nanotubes on properties of dye-sensitised solar cells, Archives of Materials Science and Engineering 74/1 (2015) 32-44.
• [108] L.A. Dobrzański, A. Mucha, M. Prokopiuk vel Prokopowicz, A. Drygała, K. Lukaszkowicz, Technology of dye-sensitized solar cells with carbon nanotubes, Archives of Materials Science and Engineering 70/2 (2014) 70-76.
• [109] L.A. Dobrzański, M. Pawlyta, A. Krztoń, B. Liszka, C.W. Tai, W. Kwaśny, Synthesis and characterization of carbon nanotubes decorated with gold nanoparticles, Acta Physica Polonica A 118/3 (2010) 483- 486.
• [110] L.A. Dobrzański, M. Szindler, M. Prokopiuk vel Prokopowicz, A. Drygała, K. Lukaszkowicz, T. Jung, M.M. Szindler, Transparent platinum counter electrode for dye-sensitized solar cells, Journal of Achievements in Materials and Manufacturing Engineering 68/1 (2015) 5-10.
• [111] L.A. Dobrzański, M. Pawlyta, A. Krztoń, B. Liszka, K. Labisz, Synthesis and characterization of carbon nanotubes decorated with platinum nanoparticles, Journal of Achievements in Materials and Manufacturing Engineering 39/2 (2010) 184-189.
• [112] L.A. Dobrzański, M. Prokopiuk vel Prokopowicz, K. Lukaszkowicz, A. Drygała, M. Szindler, Graphene oxide film as semi-transparent counter electrode for dye-sensitized solar cell, Programme and Proceedings of the Twenty Second Winter International Scientific Conference on Achievements in Mechanical and Materials Engineering, Winter-AMME ’2015, Gliwice – Zakopane, 2015, 57.
• [113] L.A. Dobrzański, M. Szindler, A. Dudek, K. Krawiec, The influence of natural and synthetic dyes on the absorbance of nanocrystalline TiO2 used in dye sensitized solar cells, Programme and Proceedings of the Twenty Second Winter International Scientific Conference on Achievements in Mechanical and Materials Engineering, Winter-AMME’2015, Gliwice – Zakopane, 2015, 58.
• [114] A. Wierzbicka (Advisor L.A. Dobrzański), Influence of carbon nanotubes on properties of Dye-Synthesised Solar Cells (DSSCs), PhD theses, Silesian University of Technology, Gliwice, 2015 (in Polish).
• [115] M. Prokopiuk vel Prokopowicz (Advisor L.A. Dobrzański), Importance of graphene in dye-synthesised solar cells on ceramic and flexible substrate, PhD theses submitted for evaluation, Silesian University of Technology, Gliwice, 2015 (in Polish).
• [116] M. Szindler (Advisor L.A. Dobrzański), Structure and properties of thin polymer layers deposited by sol-gel method in dye-synthesised solar cells, PhD theses in progress, Silesian University of Technology, Gliwice (in Polish).
• [117] L.A. Dobrzański, D. Pakuła, M. Staszuk, A.D. Dobrzańska-Danikiewicz, Structure and properties of composite coatings on sintered carbide and nitride and sialon ceramics, International OCSCO World Press, Gliwice, Open Access Library V/1 (2015) 1- 173 (in Polish).
• [118] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, Formation of structure and properties of engineering materials, Silesian University of Technology Publishing, Gliwice, 2013, 1-492 (in Polish).
• [119] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, Engineering materials surface treatment, International OCSCO World Press, Gliwice, Open Access Library 5 (2011) 1-480 (in Polish).
• [120] L.A. Dobrzański, D. Pakuła, M. Staszuk, Chemical Vapor Deposition in Manufacturing, in: A.Y.C. Nee (ed.), Handbook of Manufacturing Engineering and Technology, Springer-Verlag, London, 2015, 2755- 2803.
• [121] L.A. Dobrzański, K. Gołombek, K. Lukaszkowicz, Physical Vapor Deposition in Manufacturing, in: A.Y.C. Nee (ed.), Handbook of Manufacturing Engineering and Technology, Springer-Verlag, London, 2015, 2719-2754.
• [122] K. Lukaszkowicz, L.A. Dobrzański, J. Sondor, Microstructure, mechanical properties and corrosion resistance of nanocomposite coatings deposited by PVD technology, in: B.S.R. Reddy (ed.), Advances in Diverse Industrial Applications of Nanocomposites, InTech, Rijeka, Croatia, 2011, 1-16.
• [123] L.A. Dobrzański, The outstanding achievements in the scientific activity of the Institute of Engineering Materials and Biomaterials of the Silesian University of Technology in Gliwice, Poland, in: Y.I. Shalapko and L.A. Dobrzański (ed.): Scientific basis of modern technology: experience and prospects. Monograph, Department of Principles of Engineering Mechanics of Khmelnitsky National University, Khmelnitsky, Ukraine, 2011, 545-600.
• [124] L.A. Dobrzański, M. Adamiak, TiN and Ti(C,N) coatings on high-speed steels with Ti addition: their structure and properties, in: G. Petzow (ed.), Fortschritte in der Metallographie, Berichte der 10. Internationalen Metallographie-Tagung, Loeben, Austria, Sonderbände der Praktischen Metallographie 30, DGM Informationsgesellschaft mbH, Frankfurt, Germany, 1999, 569-574.
• [125] L.A. Dobrzański, Design and manufacturing of functional graded tool materials – dependence of properties on technology and thickness of surface layers with gradient of chemical and phase composition manufactured on tools for various applications, in: Design and manufacturing of functional graded materials, Institute of Metallurgy and Materials Science, Polish Academy of Sciences (PAN), Kraków, 2007, 130-150 (in Polish).
• [126] K. Gołombek, Structure and properties of injection moulding tool materials with nanocrystalline coatings, International OCSCO World Press, Open Access Library 1/19 (2013) 1-136 (in Polish).
• [127] K. Lukaszkowicz, Forming the structure and properties of hybrid coatings on reversible rotating extrusion dies, International OCSCO World Press, Open Access Library 10/16 (2012) 1-140 (in Polish).
• [128] M. Staszuk, L.A. Dobrzański, T. Tański, W. Kwaśny, M. Musztyfaga-Staszuk, The effect of PVD and CVD coating structures on the durability of sintered cutting edges, Archives of Metallurgy and Materials 59/1 (2014) 269-274.
• [129] K. Lukaszkowicz, L.A. Dobrzański, G. Kokot, P. Ostachowski, Characterization and properties of PVD coatings applied to extrusion dies, Vacuum 86/12 (2012) 2082-2088.
• [130] L.A. Dobrzański, M. Staszuk, K. Gołombek, A. Śliwa, M. Pancielejko, Structure and properties PVD and CVD coatings deposited onto edges of sintered cutting tools, Archives of Metallurgy and Materials 55/1 (2010)187-193.
• [131] L.A. Dobrzański, M. Polok-Rubiniec, M. Adamiak, PVD coatings deposited onto plasma nitrided X37CrMoV5-1 type steel, International Journal of Materials and Product Technology 33/3 (2008) 226- 239.
• [132] M. Adamiak, L.A. Dobrzański, Microstructure and selected properties of hot-work tool steel with PVD coatings after laser surface treatment, Applied Surface Science 254/15 (2008) 4552-4556.
• [133] L.A. Dobrzański, L.W. Żukowska, J. Mikuła, K. Gołombek, D. Pakuła, M. Pancielejko, Structure and mechanical properties of gradient PVD coatings, Journal of Materials Processing Technology 201/1-3 (2008) 310-314.
• [134] K. Lukaszkowicz, L.A. Dobrzański, Structure and mechanical properties of gradient coatings deposited by PVD technology onto the X40CrMoV5-1 steel substrate, Journal of Materials Science 43/10 (2008) 3400-3407.
• [135] L.A. Dobrzański, D. Pakuła, A. Křiž, M. Soković, J. Kopač, Tribological properties of the PVD and CVD coatings deposited onto the nitride tool ceramics, Journal of Materials Processing Technology 175/1-3 (2006) 179-185.
• [136] L.A. Dobrzański, K. Gołombek, E. Hajduczek, Structure of the nanocrystalline coatings obtained on the CAE process on the sintered tool materials, Journal of Materials Processing Technology 175/1-3 (2006) 157-162.
• [137] L.A. Dobrzański, J. Mikuła, The structure and functional properties of PVD and CVD coated Al2O3 + ZrO2 oxide tool ceramics, Journal of Materials Processing Technology 167/2-3 (2005) 438-446.
• [138] W. Kwaśny, L.A. Dobrzański, Structure, physical properties and fractal character of surface topography of the Ti+TiC coatings on sintered high speed steel, Journal of Materials Processing Technology 164-165 (2005) 1519-1523.
• [139] L.A. Dobrzański, A. Śliwa, W. Kwaśny, Employment of the finite element method for determining stresses in coatings obtained on high-speed steel with the PVD process, Journal of Materials Processing Technology 164-165 (2005) 1192-1196.
• [140] M. Soković, J. Mikuła, L.A. Dobrzański, J. Kopač, L. Kosec, P. Panjan, J. Madejski, A. Piech, Cutting properties of the Al2O3 + SiC(w) based tool ceramic reinforced with the PVD and CVD wear resistant coatings, Journal of Materials Processing Technology 164-165 (2005) 924-929.
• [141] L.A. Dobrzański, M. Polok, M. Adamiak, Structure and properties of wear resistance PVD coatings deposited onto X37CrMoV5-1 type hot work steel, Journal of Materials Processing Technology 164-165 (2005) 843-849.
• [142] L.A. Dobrzański, D. Pakuła, Comparison of the structure and properties of the PVD and CVD coatings deposited on nitride tool ceramics, Journal of Materials Processing Technology 164-165 (2005) 832-842.
• [143] L.A. Dobrzański, J. Mikuła, Structure and properties of PVD and CVD coated Al2O3 + TiC mixed oxide tool ceramics for dry on high speed cutting processes, Journal of Materials Processing Technology 164-165 (2005) 822-831.
• [144] L.A. Dobrzański, K. Gołombek, Structure and properties of the cutting tools made from cemented carbides and cermets with the TiN + mono-, gradient- or multi(Ti,Al,Si)N + TiN nanocrystalline coatings, Journal of Materials Processing Technology 164-165 (2005) 805-815.
• [145] M. Soković, L. Kosec, L.A. Dobrzański, Diffusion across PVD coated cermet tool/workpiece interface, Journal of Materials Processing Technology 157-158 (2004) 427-433.
• [146] M. Soković, J. Kopač, L.A. Dobrzański, M. Adamiak, Wear of PVD-coated solid carbide end mills in dry high-speed cutting, Journal of Materials Processing Technology 157-158 (2004) 422-426.
• [147] D. Pakuła, L.A. Dobrzański, K. Gołombek, M. Pancielejko, A. Křiž, Structure and properties of the Si3N4 nitride ceramics with hard wear resistant coatings, Journal of Materials Processing Technology 157-158 (2004) 388-393.
• [148] W. Kwaśny, L.A. Dobrzański, S. Bugliosi, Ti+TiN, Ti+Ti(CxN1-x), Ti+TiC PVD coatings on the ASP 30 sintered high-speed steel, Journal of Materials Processing Technology 157-158 (2004) 370-379.
• [149] K. Gołombek, L.A. Dobrzański, M. Soković, Properties of the wear resistant coatings deposited on the cemented carbides substrates in the cathodic arc evaporation process, Journal of Materials Processing Technology 157-158 (2004) 341-347.
• [150] L.A. Dobrzański, D. Pakuła, E. Hajduczek, Structure and properties of the multi-component TiAlSiN coatings obtained in the PVD process in the nitride tool ceramics, Journal of Materials Processing Technology 157-158 (2004) 331-340.
• [151] L.A. Dobrzański, W. Kwaśny, Z. Brytan, R. Shishkov, B. Tomov, Structure and properties of the Ti + Ti(C,N) coatings obtained in the PVD process on sintered high speed steel, Journal of Materials Processing Technology 157-158 (2004) 312-316.
• [152] L.A. Dobrzański, K. Gołombek, J. Kopač, M. Soković, Effect of depositing the hard surface coatings on properties of the selected cemented carbides and tool cermets, Journal of Materials Processing Technology 157-158 (2004) 304-311.
• [153] W. Kwaśny, L.A. Dobrzański, M. Pawlyta, W. Gulbiński, Fractal nature of surface topography and physical properties of the coatings obtained using magnetron sputtering, Journal of Materials Processing Technology 157-158 (2004) 188-193.
• [154] L.A. Dobrzański, M. Polok, P. Panjan, S. Bugliosi, M. Adamiak, Improvement of wear resistance of hot work steels by PVD coatings deposition, Journal of Materials Processing Technology 155-156 (2004) 1995-2001.
• [155] L.A. Dobrzański, D. Pakuła, J. Mikuła, K. Gołombek, Investigation of the structure and properties of coatings deposited on ceramic tool materials, International Journal of Surface Science and Engineering 1/1 (2007) 111-124.
• [156] M. Soković, L.A. Dobrzański, J. Kopač, L. Kosec, Cutting Properties of PVD and CVD Coated Al2O3 + TiC Tool Ceramic, Materials Science Forum 539-543 (2007) 1159-1164.
• [157] L.A. Dobrzański, D. Pakuła, Structure and Properties of the Wear Resistant Coatings Obtained in the PVD and CVD Processes on Tool Ceramics, Materials Science Forum 513 (2006) 119-133.
• [158] A. Śliwa, W. Kwaśny, L.A. Dobrzański, R. Dziwis, Properties determination of two-layer coatings deposited by PVD techniques using computer simulation, Archives of Materials Science and Engineering 63/2 (2013) 68-74.
• [159] D. Pakuła, M. Staszuk, L.A. Dobrzański, Investigations of the structure and properties of PVD coatings deposited onto sintered tool materials, Archives of Materials Science and Engineering 58/2 (2012) 219- 226.
• [160] L.A. Dobrzański, M. Staszuk, R. Honysz, Application of artificial intelligence methods in PVD and CVD coatings properties modelling, Archives of Materials Science and Engineering 58/2 (2012) 152- 157.
• [161] M. Polok-Rubiniec, L.A. Dobrzański, Comparison of the CrN and TiN/(Ti,Al)N PVD coatings deposited onto plasma nitrited steel, Archives of Materials Science and Engineering 54/2 (2012) 78-85.
• [162] L.A. Dobrzański, L.W. Żukowska, Gradient PVD coatings deposited on the sintered tool materials, Archives of Materials Science and Engineering 48/2 (2011) 103-111.
• [163] D. Pakuła, L.A. Dobrzański, A. Križ, M. Staszuk, Investigation of PVD coatings deposited on the Si3N4 and sialon tool ceramics, Archives of Materials Science and Engineering 46/1 (2010) 53-60.
• [164] L.A. Dobrzański, L.W. Żukowska, W. Kwaśny, J. Mikuła, K. Gołombek, Ti(C,N) and (Ti,Al)N hard wear resistant coatings, Archives of Materials Science and Engineering 42/2 (2010) 93-103.
• [165] M. Polok-Rubiniec, L.A. Dobrzański, M. Adamiak, Comparison of the PVD coatings, Archives of Materials Science and Engineering 38/2 (2009) 118-125.
• [166] L.A. Dobrzański, M. Staszuk, J. Konieczny, W. Kwa- śny, M. Pawlyta, Structure of TiBN coatings deposited onto cemented carbides and sialon tool ceramics, Archives of Materials Science and Engineering 38/1 (2009) 48-54.
• [167] L.A. Dobrzański, L.W. Żukowska, J. Mikuła, K. Go- łombek, T. Gawarecki, Hard gradient (Ti,Al,Si)N coating deposited on composite tool materials, Archives of Materials Science and Engineering 36/2 (2009) 69-75.
• [168] L.A. Dobrzański, L.W. Żukowska, J. Kubacki, K. Go- łombek, J. Mikuła, XPS and AES analysis of PVD coatings, Archives of Materials Science and Engineering 32/2 (2008) 99-102.
• [169] L.A. Dobrzański, L.W. Żukowska, Properties of the multicomponent and gradient PVD coatings, Archives of Materials Science and Engineering 28/10 (2007) 621-624.
• [170] L.A. Dobrzański, K. Lukaszkowicz, D. Pakuła, J. Mikuła, Corrosion resistance of multilayer and gradient coatings deposited by PVD and CVD techniques, Archives of Materials Science and Engineering 28/1 (2007) 12-18.
• [171] W. Kwaśny, M.J. Woźniak, J. Mikuła, L.A. Dobrzański, Structure, physical properties and multifractal characteristics of the PVD and CVD coatings deposition onto the Al2O3+TiC ceramics, International Journal of Computational Materials Science and Surface Engineering 1/1 (2007) 97-113.
• [172] L.A. Dobrzański, A. Śliwa, W. Sitek, W. Kwaśny, The computer simulation of critical compressive stresses on the PVD coatings, International Journal of Computational Materials Science and Surface Engineering 1/1 (2007) 28-39.
• [173] L.A. Dobrzański, K. Gołombek, Characterisation of the Gradient Coatings TiN/(Ti,Al,Si)N/TiN Type Deposited on Sintered Tool Materials, Metallurgia Italiana 98/4 (2006) 29-34.
• [174] L.A. Dobrzański, K. Gołombek, Structure and Properties of Selected Cemented Carbides and Cermets Covered with TiN/(Ti,Al,Si)N/TiN Coatings Obtained by the Cathodic Arc Evaporation Process, Materials Research 8/2 (2005) 113-116.
• [175] L.A. Dobrzański, Report on the main areas of the materials science and surface engineering own research, Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 514-549.
• [176] A. Śliwa, L.A. Dobrzański, W. Kwaśny, M. Tisza, L. Toth, S. Szabolcs, S. Pudmer, Innovative method of properties determination for tools covered with PVD coatings using computer simulation, Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 375-382.
• [177] L.A. Dobrzański, L.W. Żukowska, A. Śliwa, J. Mikuła, FEM modelling of internal stresses in advanced PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 259-268.
• [178] L.A. Dobrzański, M. Staszuk, Surface modification of sialon ceramics and cemented carbides by PVD coating deposition, Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 158-165.
• [179] L.A. Dobrzański, L.W. Żukowska, Structure and properties of gradient PVD coatings deposited on the sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering 44/2 (2011) 115-139.
• [180] A. Śliwa, L.A. Dobrzański, W. Kwaśny, M. Staszuk, Simulation of the microhardness and internal stresses measurement of PVD coatings by use of FEM, Journal of Achievements in Materials and Manufacturing Engineering 43/2 (2010) 684-691.
• [181] L.A. Dobrzański, M. Staszuk, PVD and CVD gradient coatings on sintered carbides and sialon tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering 43/2 (2010) 552-576.
• [182] M. Polok-Rubiniec, L.A. Dobrzański, M. Adamiak, Comparison of the PVD coatings deposited onto plasma nitrited steel, Journal of Achievements in Materials and Manufacturing Engineering 42/1-2 (2010) 172-179.
• [183] K. Lukaszkowicz, L.A. Dobrzański, W. Kwaśny, K. Labisz, M. Pancielejko, Microstructure and mechanical properties of nanocomposite coatings deposited by cathodic arc evaporation, Journal of Achievements in Materials and Manufacturing Engineering 42/2 (2010) 156-163.
• [184] L.A. Dobrzański, M. Staszuk, M. Pawlyta, J. Konieczny, The investigations of (Ti,Al)N and (Al,Ti)N coatings obtained by PVD process onto sintered cutting tools, Journal of Achievements in Materials and Manufacturing Engineering 42/1-2 (2010) 148- 155.
• [185] L.A. Dobrzański, A. Śliwa, L.W. Żukowska, J. Mikuła, K. Gołombek, Structure and mechanical properties of PVD coatings for tool materials, Journal of Achievements in Materials and Manufacturing Engineering 42/2 (2010) 33-41.
• [186] M. Polok-Rubiniec, K. Lukaszkowicz, L.A. Dobrzański, Comparison of nanostructure and duplex PVD coatings deposited onto hot work tool steel substrate, Journal of Achievements in Materials and Manufacturing Engineering 41/1-2 (2010) 187-194.
• [187] A. Śliwa, J. Mikuła, L.A. Dobrzański, FEM application for modelling of PVD coatings properties, Journal of Achievements in Materials and Manufacturing Engineering 41/1-2 (2010) 164-171.
• [188] L.A. Dobrzański, M. Staszuk, K. Gołombek, M. Pancielejko, Properties of Ti(B,N) coatings deposited onto cemented carbides and sialon tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering 41/1-2 (2010) 66-73.
• [189] L.A. Dobrzański, M. Staszuk, A. Křiž, K. Lukaszkowicz, Structure and mechanical properties of PVD gradient coatings deposited onto tool steels and sialon tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering 37/1 (2009) 36-43.
• [190] L.A. Dobrzański, L.W. Żukowska, J. Mikuła, K. Gołombek, P. Podstawski, Functional properties of the sintered tool materials with (Ti,Al)N coating, Journal of Achievements in Materials and Manufacturing Engineering 36/2 (2009) 134-141.
• [191] A. Śliwa, J. Mikuła, K. Gołombek, L.A. Dobrzański, FEM modelling of internal stresses in PVD coated FGM, Journal of Achievements in Materials and Manufacturing Engineering 36/1 (2009) 71-78.
• [192] A. Śliwa, L.A. Dobrzański, W. Kwaśny, W. Sitek, The computer simulation of internal stresses on the PVD coatings, Archives of Computational Materials Science and Surface Engineering 1/3 (2009) 183-188.
• [193] L.A. Dobrzański, S. Skrzypek, D. Pakuła, J. Mikuła, A. Křiž, Influence of the PVD and CVD technologies on the residual macro-stresses and functional properties of the coated tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering 35/2 (2009) 162-168.
• [194] L.A. Dobrzański, M. Staszuk, M. Pawlyta, W. Kwaśny, M. Pancielejko, Characteristic of Ti(C,N) and (Ti,Zr)N gradient PVD coatings deposited onto sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 629-634.
• [195] L.A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła, Multilayer and gradient PVD coatings on the sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 170-190.
• [196] K. Gołombek, J. Mikuła, D. Pakuła, L. Żukowska, L.A. Dobrzański, Sintered tool materials with multicomponent PVD gradient coatings, Journal of Achievements in Materials and Manufacturing Engineering 31/1 (2008) 15-22.
• [197] M. Polok-Rubiniec, L.A. Dobrzański, M. Adamiak, The properties and wear resistance of the CrN PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering 30/2 (2008) 165-171.
• [198] A. Śliwa, L.A. Dobrzański, W. Kwaśny, W. Sitek, Finite Element Method application for modeling of PVD coatings properties, Journal of Achievements in Materials and Manufacturing Engineering 27/2 (2008) 171-174.
• [199] M. Polok-Rubiniec, L.A. Dobrzański, K. Lukaszkowicz, M. Adamiak, Comparison of the structure, properties and wear resistance of the TiN PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering 27/1 (2008) 87-90.
• [200] K. Lukaszkowicz, L.A. Dobrzański, M. Staszuk, M. Pancielejko, Comparison of the PVD gradient coatings deposited onto X40CrMoV5-1 and HS6-5-2 tool steel substrate, Journal of Achievements in Materials and Manufacturing Engineering 27/1 (2008) 79-82.
• [201] M. Polok-Rubiniec, K. Lukaszkowicz, L.A. Dobrzański, M. Adamiak, Comparison of the PVD coatings deposited onto hot work tool steel and brass substrates, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 195-198.
• [202] W. Kwaśny, W. Sitek, L.A. Dobrzański, Modelling of properties of the PVD coatings using neural networks, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 163-166.
• [203] W. Kwaśny, L.A. Dobrzański, M. Król, J. Mikuła, Fractal and multifractal characteristics of PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 159-162.
• [204] L.A. Dobrzański, A. Śliwa, W. Kwaśny, The computer simulation of stresses in the Ti+Ti(CxN1-x) coatings obtained in the PVD process, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 155-158.
• [205] K. Lukaszkowicz, L.A. Dobrzański, M. Pancielejko, Mechanical properties of the PVD gradient coatings deposited onto the hot work tool steel X40CrMoV5-1, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 115-118.
• [206] K. Gołombek, L.A. Dobrzański, Hard and wear resistant coatings for cutting tools, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 107-110.
• [207] D. Pakuła, L.A. Dobrzański, Investigation of the structure and properties of PVD and CVD coatings deposited on the Si3N4 nitride ceramics, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 79-82.
• [208] J. Mikuła, L.A. Dobrzański, PVD and CVD coating systems on oxide tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 75-78.
• [209] L.A. Dobrzański, L. Wosińska, J. Mikuła, K. Go- łombek, T. Gawarecki, Investigation of hard gradient PVD (Ti,Al,Si)N coating, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 59-62.
• [210] L.A. Dobrzański, M. Staszuk, J. Konieczny, J. Lelątko, Structure of gradient coatings deposited by CAE-PVD techniques, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 55-58.
• [211] W. Kwaśny, D. Pakuła, M. Woźniak, L.A. Dobrza- ński, Fractal and multifractal characteristics of CVD coatings deposited onto the nitride tool ceramics, Journal of Achievements in Materials and Manufacturing Engineering 20/1-2 (2007) 371-374.
• [212] L.A. Dobrzański, A. Śliwa, W. Kwaśny, The computer simulation of internal stresses in coatings obtained by the PVD process, Journal of Achievements in Materials and Manufacturing Engineering 20/1-2 (2007) 355-358.
• [213] M. Polok-Rubiniec, L.A. Dobrzański, M. Adamiak, Comparison of the adhesion and wear resistance of the PVD coatings, Journal of Achievements in Materials and Manufacturing Engineering 20/1-2 (2007) 279-282.
• [214] L.A. Dobrzański, L. Wosińska, K. Gołombek, J. Mikuła, Structure of multicomponent and gradient PVD coatings deposited on sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering 20/1-2 (2007) 99-102.
• [215] L.A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła, Improvement of tool materials by deposition of gradient and multilayers coatings, Journal of Achievements in Materials and Manufacturing Engineering 19/1 (2006) 86-91.
• [216] L.A. Dobrzański, M. Staszuk, A. Śliwa, Simulation of the microhardness measurement of PVD coatings by use of FEM, Journal of Achievements in Materials and Manufacturing Engineering 18/1-2 (2006) 279-282.
• [217] L.A. Dobrzański, K. Lukaszkowicz, J. Mikuła, D. Pakuła, Structure and corrosion resistance of gradient and multilayer coatings, Journal of Achievements in Materials and Manufacturing Engineering 18/1-2 (2006) 75-78.
• [218] W. Kwaśny, J. Mikuła, L.A. Dobrzański, Fractal and multifractal characteristics of coatings deposited on pure oxide ceramics, Journal of Achievements in Materials and Manufacturing Engineering 17/1-2 (2006) 257-260.
• [219] L.A. Dobrzański, A. Śliwa, W. Kwaśny, W. Sitek, The computer simulation of stresses in the Ti+TiC coatings obtained in the PVD process, Journal of Achievements in Materials and Manufacturing Engineering 17/1-2 (2006) 241-244.
• [220] L.A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła, Cutting ability improvement of coated tool materials, Journal of Achievements in Materials and Manufacturing Engineering 17/1-2 (2006) 41-44.
• [221] L.A. Dobrzański, K. Gołombek, Gradient coatings deposited by Cathodic Arc Evaporation: characteristic of structure and properties, Journal of Achievements in Materials and Manufacturing Engineering 14/1-2 (2006) 48-53.
• [222] L.A. Dobrzański, M. Staszuk, K. Gołombek, J. Mikuła, Structure and properties of PVD coatings deposited on to SiAlON tool ceramics, Visnik Tehnologichnogo Universitetu Podilla 4/2 (2007) 21-24.
• [223] K. Lukaszkowicz, L.A. Dobrzański, Structural and phase analysis of CrAlSiN/DLC deposited by hybrid PVD/PACVD method, Inżynieria Materiałowa 34/4 (2013) 320-323.
• [224] A. Śliwa, W. Kwaśny, L.A. Dobrzański, Computer simulation of stresses in coatings obtained in the PVD process, Inżynieria Materiałowa 31/3 (2010) 732-734.
• [225] K. Lukaszkowicz, J. Mikuła K. Gołombek, L.A. Dobrzański, J. Szewczenko, M. Pancielejko, Structure and mechanical properties of nanocomposite coatings deposited by PVD process onto tool steel substrates, Inżynieria Materiałowa 29/6 (2008) 732-737.
• [226] W. Kwaśny, W. Sitek, D. Pakuła, L.A. Dobrzański, Application of neural networks for analysis of relationship between the service properties of CVD coatings and their multifractal parameters, Inżynieria Materiałowa 28/3-4 (2007) 660-665.
• [227] L.A. Dobrzański, L. Wosińska, J. Mikuła, K. Gołombek, Multicomponent and gradient PVD coatings deposited on the sintered tool materials, Inżynieria Materiałowa 28/3-4 (2007) 627-631.
• [228] M. Adamiak (Advisor L.A. Dobrzański), The structure and properties of TiN i Ti(C,N) coatings deposited in the PVD process on high speed steel, PhD theses, Silesian University of Technology, Gliwice, 1997 (in Polish).
• [229] W. Kwaśny (Advisor L.A. Dobrzański), The structure and properties of coatings obtained in PVD process on sintered high speed steel, PhD theses, Silesian University of Technology, Gliwice, 2001 (in Polish).
• [230] K. Gołombek (Advisor L.A. Dobrzański), The structure and properties of sintered tool carbides and cermets coated in PVD process by antiwear coatings, PhD theses, Silesian University of Technology, Gliwice, 2001 (in Polish).
• [231] D. Pakuła (Advisor L.A. Dobrzański), Structure and properties of PVD and CVD multilayer coatings resistant to abrasion on nitride ceramic tool Si3N4, PhD theses, Silesian University of Technology, Gliwice, 2003 (in Polish).
• [232] J. Mikuła (Advisor L.A. Dobrzański), Structure and properties of oxide tool ceramics based on Al2O3 with antiwear PVD and CVD coatings, PhD theses, Silesian University of Technology, Gliwice, 2004 (in Polish).
• [233] M. Polok-Rubiniec (Advisor L.A. Dobrzański), Structure and properties of PVD coatings deposited onto substrate from X37CrMoV5-1 steel heat treated and plasma nitrided, PhD theses, Silesian University of Technology, Gliwice, 2005 (in Polish).
• [234] A. Śliwa (Advisor L.A. Dobrzański), Computer simulation of internal stresses of PVD coatings on sintered high-speed steel, PhD theses, Silesian University of Technology, Gliwice, 2005 (in Polish).
• [235] M. Staszuk (Advisor L.A. Dobrzański), The structure and properties of PVD and CVD graded coatings deposited on sialons and sintered carbides, PhD theses, Silesian University of Technology, Gliwice, 2010 (in Polish).
• [236] L. Żukowska (Advisor L.A. Dobrzański), Structure and properties of graded PVD coatings on sintered tool materials, PhD theses, Silesian University of Technology, Gliwice, 2010 (in Polish).
• [237] L.A. Dobrzański, M. Staszuk, D. Pakuła, M. Musztyfaga, Increased durability of cutting edges from sialon tool ceramics by using multicomponent, nanostructured PVD coatings, Gold Medal on 1st International Exhibition of Inventions INVENTO 2013, Prague, Czech Republic, 6-8.06.2013.
• [238] L.A. Dobrzański, W. Kwaśny, A. Śliwa, Computer simulation of internal stresses obtaining in the PVD process on substrate of the sintered high-speed steel, Gold Medal on 24th International Invention, Innovation & Technology Exhibition "ITEX 2012", Kuala Lumpur, Malaysia, 9-11.05.2013.
• [239] L.A. Dobrzański, M. Staszuk, D. Pakuła, M. Musztyfaga, Increased durability of cutting edges from sialon tool ceramics by using multicomponent, nanostructured PVD coatings, Gold Medal on 24th International Invention, Innovation & Technology Exhibition "ITEX 2012", Kuala Lumpur, Malaysia, 9-11.05.2013.
• [240] K. Gołombek, J. Mikuła, G. Matula, L.A. Dobrzański, Functional Tool Material (FTM) based on metal matrix reinforced coated nanocrystalline surface layers, Gold Medal on 8th Seoul International Invention Fair 2012, Seoul, Korea, 29.11-2.12.2012.
• [241] L.A. Dobrzański, D. Pakuła, M. Staszuk, M. Musztyfaga, Multi component PVD coatings for increasing durability of ceramic cutting edges, Gold Medal on 5th Fair International Inventions and Innovations Exhibition FINEX 2013, Teheran, Iran, 4-7.02.2013.
• [242] K. Gołombek, L.A. Dobrzański, Nanocrystalline and nanocomposite surface layers for cutting tools, Silver Medal on 41st International Exhibition of Inventions of Geneva, 2013 Switzerland, 10-14.04.2013.
• [243] K. Gołombek, J. Mikuła, G. Matula, L.A. Dobrzański, Functional Tool Material (FTM) based on metal matrix reinforced coated nanocrystalline surface layers, Silver Medal on Malaysia Technology Expo MTE 2013, Kuala Lumpur, Malaysia, 21-23.02.2013.
• [244] G. Matula, K. Gołombek, L.A. Dobrzański, B. Tomiczek, The powder pressureless forming and sintering method of cermets layer on the steel support of new developed tool materials, Bronze Medal on The Belgian and International Trade Fair for Technological Innovation Brussels Eureka, Brussels, Belgium, 15-17.11.2012.
• [245] L.A. Dobrzański, T. Tański, A.D. Dobrzańska-Danikiewicz, M. Król, S. Malara, J. Domagała-Dubiel, Mg-Al-Zn alloys structure and properties, International OCSCO World Press, Gliwice, Open Access Library 5/11 (2012) 1-319 (in Polish).
• [246] L.A. Dobrzański, K. Lukaszkowicz, A. Zarychta, L. Cunha, Corrosion resistance of multilayer coatings deposited by PVD techniques onto the brass substrate, Journal of Materials Processing Technology 164-165 (2005) 816-821.
• [247] K. Lukaszkowicz, L.A. Dobrzański, A. Zarychta, Structure, chemical and phase compositions of coatings deposited with the reactive magnetron sputtering onto the brass substrate, Journal of Materials Processing Technology 157-158 (2004) 380-387.
• [248] L.A. Dobrzański, K. Lukaszkowicz, Erosion resistance and tribological properties of coatings deposited by reactive magnetron sputtering method onto the brass substrate, Journal of Materials Processing Technology 157-158 (2004) 317-323.
• [249] L.A. Dobrzański, K. Lukaszkowicz, L. Cunha, Properties of PVD Coatings on a Brass Substrate, Materials Science Forum 437-438 (2003) 199-202.
• [250] L.A. Dobrzański, K. Lukaszkowicz, Comparison of Structure and Properties of the PVD, Hybrid (Galvanic + PVD) and Galvanic Coatings Deposited onto the Brass Substrate, Materials Science Forum 591- 593 (2008) 860-864.
• [251] T. Tański, L.A. Dobrzański, S. Rusz, W. Matysiak, M. Kraus, Characteristic features of fine-grained coatings deposited on magnesium alloys, Archives of Materials Science and Engineering 66/1 (2014) 13- 20. [252] T. Tański, K. Labisz, L.A. Dobrzański, M. Wiśniowski, W. Matysiak: TEM microstructure investigations of aluminium alloys used as coating substrate, Archives of Materials Science and Engineering 59/2 (2013) 82-92. [253] J. Konieczny, K. Labisz, J. Wieczorek, L.A. Dobrzański, Stereometry specification of anodised and PVD coated surface of aluminium alloy, Archives of Materials Science and Engineering 38/2 (2009) 85-92.
• [254] L.A. Dobrzański, K. Lukaszkowicz, K. Labisz, Structure, texture and chemical composition of coatings deposited by PVD techniques, Archives of Materials Science and Engineering 37/1 (2009) 45- 52.
• [255] L.A. Dobrzański, K. Lukaszkowicz, Mechanical properties of monolayer coatings deposited by PVD techniques, Archives of Materials Science and Engineering 28/9 (2007) 549-556.
• [256] L.A. Dobrzański, K. Lukaszkowicz, K. Labisz, Structure of monolayer coatings deposited by PVD techniques, Journal of Achievements in Materials and Manufacturing Engineering 18/1-2 (2006) 271- 274.
• [257] K. Lukaszkowicz, L.A. Dobrzański, A. Zarychta, L. Cunha, Mechanical properties of multilayer coatings deposited by PVD techniques onto the brass substrate, Journal of Achievements in Materials and Manufacturing Engineering 15/1-2 (2006) 47-52.
• [258] K. Lukaszkowicz (Advisor L.A. Dobrzański), Structure and properties of wear resistance and corrosion resistant PVD multilayer coatings, PhD theses, Silesian University of Technology, Gliwice, 2001 (in Polish).
• [259] T. Tański, E. Jonda, K. Labisz, L.A. Dobrzański, Toughness of Laser-Treated Surface Layers Obtained by Alloying and Feeding of Ceramic Powders, in: S. Zhang (ed.), Thin Films and Coatings. Toughening and Toughness Characterization, CRC Press, Boca Raton, 2015, 225-314.
• [260] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, T. Tański, E. Jonda, A. Drygała, M. Bonek, Laser Surface Treatment in Manufacturing, in: A.Y.C. Nee (ed.), Handbook of Manufacturing Engineering and Technology, Springer-Verlag, London, 2015, 2677- 2717.
• [261] T. Tański, W. Pakieła, M. Wiśniowski, L.A. Dobrzański, Shaping of Surface Layer Structure and Mechanical Properties After Laser Treatment of Aluminium Alloys, in: A. Öchsner, H. Altenbach (eds.), Mechanical and Materials Engineering of Modern Structure and Component Design, Springer International Publishing, Cham, 2015, 85-96.
• [262] L.A. Dobrzański, T. Tański, A.D. Dobrzańska-Danikiewicz, E. Jonda, M. Bonek, A. Drygała, Structures, properties and development trends of laser surface treated hot-work steels, light metal alloys and polycrystalline silicon, in: J. Lawrence, D. Waugh (eds.), Laser Surface Engineering. Processes and Applications, Woodhead Publishing Series in Electronic and Optical Materials, Elsevier Ltd, Amsterdam, 2015, 3-32.
• [263] L.A. Dobrzański, K. Labisz, E. Jonda, A. Polok, K. Lukaszkowicz, Comparison of structure and properties of the surface layer of the 32CrMoV12-20 and X40CrMoV5-1 steel alloyed with high power diode laser, A. Kneissl (ed.), Fortschritte in der Metallographie, Berichte der 12. Internationalen Metallographie-Tagung, Loeben, Austria, Sonderbände der Praktischen Metallographie 38, Werkstoff-Informationsgesellschaft mbH, Frankfurt, 2006, 289-296.
• [264] L.A. Dobrzański, K. Labisz, E. Jonda, A. Klimpel, Comparison of the surface alloying of the 32CrMoV12-28 tool steel using TiC and WC powder, Journal of Materials Processing Technology 191/1-3 (2007) 321-325.
• [265] L.A. Dobrzański, M. Piec, A. Klimpel, Z. Trojanowa, Surface modification of hot work tool steel by high-power diode laser, International Journal of Machine Tools and Manufacture 47/5 (2007) 773-778.
• [266] A. Klimpel, L.A. Dobrzański, A. Lisiecki, D. Janicki, The study of the technology of laser and plasma surfacing of engine valves face made of X40CrSiMo10-2 steel using cobalt-based powders, Journal of Materials Processing Technology 175/1-3 (2006) 251-256.
• [267] M. Bonek, L.A. Dobrzański, E. Hajduczek, A. Klimpel, Structure and properties of laser alloyed surface layers on the hot-work tool steel, Journal of Materials Processing Technology 175/1-3 (2006) 45-54.
• [268] L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel, A. Lisiecki, Comparison of the structures of the hot-work tool steels laser modified surface layers, Journal of Materials Processing Technology 164-165 (2005) 1014-1024.
• [269] L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel, Alloying the X40CrMoV5-1 steel surface layer with tungsten carbide by the use of a high power diode laser, Applied Surface Science 247/1-4 (2005) 328-332.
• [270] L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel, A. Lisiecki, Application of high power diode laser (HPDL) for alloying of X40CrMoV5-1 steel surface layer by tungsten carbides, Journal of Materials Processing Technology 155-156 (2004) 1956-196
• [271] L.A. Dobrzański, M. Bonek, A. Klimpel, A. Lisiecki, Surface-Layer’s Structure of X40CrMoV5-1 Steel Remelted and/or WC Alloyed with HPDL Laser, Materials Science Forum 437-438 (2003) 69-72.
• [272] Z. Brytan, M. Bonek, L.A. Dobrzański, W. Pakieła, Surface layer properties of sintered ferritic stainless steel remelted and alloyed with FeNi and Ni by HPDL laser, Advanced Materials Research 291-294 (2011) 1425-1428.
• [273] M. Bonek, G. Matula, L.A. Dobrzański, Effect of laser surface melting on structure and properties of a high speed tool steel, Advanced Materials Research 291-294 (2011) 1365-1368.
• [274] Z. Brytan, M. Bonek, L.A. Dobrzański, D. Ugues, M. Actis Grande, The Laser Surface Remelting of Austenitic Stainless Steel, Materials Science Forum 654-656 (2010) 2511-2514.
• [275] M. Bonek, L.A. Dobrzański, Characterization performance of laser melted commercial tool steels, Materials Science Forum 654-656 (2010) 1848-1851.
• [276] G. Matula, M. Bonek, L.A. Dobrzański, Comparison of Structure and Properties of Hard Coatings on Commercial Tool Materials Manufactured with the Pressureless Forming Method or Laser Treatment, Materials Science Forum 638-642 (2010) 1830-1835.
• [277] M. Piec, L.A. Dobrzański, K. Labisz, E. Jonda, A. Klimpel, Laser Alloying with WC Ceramic Powder in Hot Work Tool Steel Using a High Power Diode Laser (HPDL), Advanced Materials Research 15-17 (2007) 193-198.
• [278] L.A. Dobrzański, M. Bonek, M. Piec, E. Jonda, Diode Laser Modification of Surface Gradient Layer Properties of a Hot-work Tool Steel, Materials Science Forum 532-533 (2006) 657-660.
• [279] L.A. Dobrzański, K. Labisz, M. Piec, J. Lelątko, A. Klimpel, Structure and Properties of the 32CrMoV12-28 Steel Alloyed with WC Powder using HPDL Laser, Materials Science Forum 530- 531 (2006) 334-339.
• [280] L.A. Dobrzański, M. Piec, Z. Trojanowa, J. Lelątko, A. Klimpel, Structure and Properties of Gradient Layers Using High Power Diode Laser, Materials Science Forum 530-531 (2006) 269-274.
• [281] L.A. Dobrzański, K. Labisz, A. Klimpel, Comparison of Mechanical Properties of the 32CrMoV12- 28 Hot Work Tool Steels Alloyed with WC, VC and TaC Powder Using HPDL Laser, Key Engineering Materials 324-325 (2006) 1233-1236.
• [282] L.A. Dobrzański, E. Jonda, W. Pakieła, M. Bilewicz, Improvement of wear resistance of the hot work tool steel by laser surface feeding with ceramic powder, Archives of Materials Science and Engineering 60 (2013) 64-71.
• [283] L.A. Dobrzański, M. Bonek, K. Labisz, Effect of laser surface alloying on structure of a commercial tool steel, International Journal of Microstructure and Materials Properties 8/1-2 (2013) 27-37.
• [284] L.A. Dobrzański, E. Jonda, A. Klimpel, A. Lisiecki, The influence of laser re-melting and alloying on the structure and properties of the X40CrMov5-l steel surface layer, Welding International 26 (2012) 411- 415. [285] L.A. Dobrzański, E. Jonda, K. Labisz, Comparison of the abrasion wear resistance of the laser alloyed hot work tool steels, Archives of Materials Science and Engineering 55/2 (2012) 85-92.
• [286] L.A. Dobrzański, E. Jonda, K. Labisz, The influence of laser modification on the structure and properties of the X40CrMoV5-1 and 32CrMoV12-28 hot work tool steels, Archives of Materials Science and Engineering 41/2 (2010) 104-111.
• [287] L.A. Dobrzański, E. Jonda, A. Klimpel, Laser surface treatment of the hot work tool steel alloyed with TaC and VC carbide powders, Archives of Materials Science and Engineering 37/1 (2009) 53- 60.
• [288] L.A. Dobrzański, K. Labisz, M. Piec, A. Klimpel, Mechanical properties of the surface layer of the laser alloyed 32CrMoV12-28 steel, Archives of Materials Science and Engineering 29/1 (2008) 57-60.
• [289] L.A. Dobrzański, E. Jonda, A. Križ, K. Lukaszkowicz, Mechanical and tribological properties of the surface layer of the hot work tool steel obtained by laser alloying, Archives of Materials Science and Engineering 28/7 (2007) 389-396.
• [290] L.A. Dobrzański, A. Polok, P. Zarychta, E. Jonda, M. Piec, K. Labisz, Modelling of properties of the alloy tool steels after laser surface treatment, International Journal of Computational Materials Science and Surface Engineering 1/5 (2007) 526-539.
• [291] L.A. Dobrzański, M. Bonek, E. Hajduczek, A. Klimpel, Effect of Diode Laser Surface Alloying of HotWork Tool Steel, Metallurgia Italiana 98/4 (2006) 41-46.
• [292] Z. Brytan, L.A. Dobrzański, W. Pakieła, Laser surface alloying of sintered stainless steels with SiC powder, Journal of Achievements in Materials and Manufacturing Engineering 47/1 (2011) 42-56.
• [293] L.A. Dobrzański, E. Jonda, K. Labisz, M. Bonek, A. Klimpel, The comparision of tribological properties of the surface layer of the hot work tool steels obtained by laser alloying, Journal of Achievements in Materials and Manufacturing Engineering 42/1-2 (2010) 142-147.
• [294] K. Labisz, L.A. Dobrzański, E. Jonda, J. Lelątko, Comparison of surface laser alloying of chosen tool steel using Al2O3 and ZrO2 powder, Journal of Achievements in Materials and Manufacturing Engineering 39/1 (2010) 87-94.
• [295] L.A. Dobrzański, E. Jonda, K. Labisz, Structure and properties of surface layer of hot-work tool steels alloyed using high power diode laser, Journal of Achievements in Materials and Manufacturing Engineering 37/2 (2009) 617-621.
• [296] L.A. Dobrzański, K. Labisz, A. Klimpel, Structure and properties of the laser alloyed 32CrMoV12-28 with ceramic powder, Journal of Achievements in Materials and Manufacturing Engineering 32/1 (2009) 53-60.
• [297] L.A. Dobrzański, M. Bonek, E. Hajduczek, K. Labisz, M. Piec, E. Jonda, A. Polok, Structure and properties laser alloyed gradient surface layers of the hot-work tool steels, Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 148-169.
• [298] L.A. Dobrzański, K. Labisz, M. Bonek, A. Klimpel, Comparison of 32CrMoV12-28 steel alloyed with WC, VC and TaC powder using HPDL laser, Journal of Achievements in Materials and Manufacturing Engineering 30/2 (2008) 187-192.
• [299] L.A. Dobrzański, K. Labisz, E. Jonda, Laser treatment of the surface layer of 32CrMoV12-28 and X40CrMoV5-1 steels, Journal of Achievements in Materials and Manufacturing Engineering 29/1 (2008) 63-70.
• [300] M. Bonek, M. Piec, L.A. Dobrzański, The study of properties of laser modified hot-work tool steel surface layer, Journal of Achievements in Materials and Manufacturing Engineering 28/1 (2008) 75-78.
• [301] L.A. Dobrzański, E. Jonda, K. Lukaszkowicz, K. Labisz, A. Klimpel, Surface modification of the X40CrMoV5-1 steel by laser alloying and PVD coatings deposition, Journal of Achievements in Materials and Manufacturing Engineering 27/2 (2008) 179-182.
• [302] L.A. Dobrzański, M. Piec, K. Labisz, M. Bonek, A. Klimpel, Functional properties of surface layers of X38CrMoV5-3 hot work tool steel alloyed with HPDL laser, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 191- 194.
• [303] M. Bonek, L.A. Dobrzański, A. Klimpel, Structure and properties of hot-work tool steel alloyed by WC carbides by a use of high power diode laser, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 175-178.
• [304] L.A. Dobrzański, E. Jonda, A. Polok, A. Klimpel, Comparison of the thermal fatigue surface layers of the X40CrMoV5-1 hot work tool steels laser alloyed, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 135-138.
• [305] L.A. Dobrzański, K. Labisz, M. Piec, A. Klimpel, Modelling of surface layer of the 32CrMoV12-28 tool steel using HPDL laser for alloying with TiC powder, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 27-34.
• [306] L.A. Dobrzański, M. Piec, A. Klimpel, Improvement of the hot work tool steel surface layers properties using a high power diode laser, Journal of Achievements in Materials and Manufacturing Engineering 21/1 (2007) 13-22.
• [307] M. Bonek, L.A. Dobrzański, M. Piec, E. Hajduczek, A. Klimpel, Crystallisation mechanism of laser alloyed gradient layer on tool steel, Journal of Achievements in Materials and Manufacturing Engineering 20/1-2 (2007) 411-414.
• [308] L.A. Dobrzański, K. Labisz, A. Klimpel, J. Lelątko, Modelling of gradient layer properties of the 32CrMoV12-27 surface layer alloyed with WC powder, Journal of Achievements in Materials and Manufacturing Engineering 20/1-2 (2007) 343-346.
• [309] L.A. Dobrzański, M. Piec, M. Bonek, E. Jonda, A. Klimpel, Mechanical and tribological properties of the laser alloyed surface coatings, Journal of Achievements in Materials and Manufacturing Engineering 20/1-2 (2007) 235-238.
• [310] L.A. Dobrzański, K. Labisz, A. Klimpel, Effect of laser alloying on thermal fatigue and mechanical properties of the 32CrMoV12-20 steel, Journal of Achievements in Materials and Manufacturing Engineering 19/1 (2006) 83-90.
• [311] L.A. Dobrzański, E. Jonda, K. Lukaszkowicz, A. Křiž, Structure and tribological behavior of surface layer of laser modified X40CrMoV5-1 steel, Journal of Achievements in Materials and Manufacturing Engineering 18/1-2 (2006) 343-346.
• [312] L.A. Dobrzański, A. Polok, E. Jonda, Structure and properties of surface layers obtained by alloying of the hot work tool steels, Journal of Achievements in Materials and Manufacturing Engineering 17/1-2 (2006) 329-332.
• [313] L.A. Dobrzański, K. Labisz, A. Klimpel, Mechanical properties and structure changes of the laser alloyed 32CrMoV12-28 steel, Journal of Achievements in Materials and Manufacturing Engineering 17/1-2 (2006) 325-328.
• [314] M. Bonek, L.A. Dobrzański, Functional properties of laser modified surface of tool steel, Journal of Achievements in Materials and Manufacturing Engineering 17/1-2 (2006) 313-316.
• [315] L.A. Dobrzański, E. Jonda, A. Polok, Comparison of the abrasion wear resistance of the X40CrMoV5-1 and 55NiCrMoV7 hot work tool steels with their surface layer enriched with the ceramic powders, Journal of Achievements in Materials and Manufacturing Engineering 15/1-2 (2006) 32-38.
• [316] M. Bonek, L.A. Dobrzański, E. Hajduczek, A. Klimpel, Laser modification of surface layer properties of a hot-work tool steel, Journal of Achievements in Materials and Manufacturing Engineering 14/1-2 (2006) 152-156.
• [317] L.A. Dobrzański, M. Sroka, Functional properties of the laser alloyed surface coatings, Visnik Tehnologichnogo Universitetu Podilla 4/2 (2007) 90-93.
• [318] L.A. Dobrzański, B. Dołżańska, G. Matula, Structure and properties of gradient cermets reinforcer with the (W, Ti)C carbides, Visnik Tehnologichnogo Universitetu Podilla 42 (2007) 15-20.
• [319] L.A. Dobrzański, E. Jonda, K. Labisz, Structure and properties of surface layer of hot work tool steels alloyed using high power diode laser (HPDL), Archives of Materials Science 29/3 (2008) 102-109.
• [320] M. Bonek (Advisor L.A. Dobrzański), The structure and properties of surface layers obtained as a result of laser treatment of hot-work alloy tool steel, PhD theses, Silesian University of Technology, Gliwice, 2003 (in Polish).
• [321] K. Labisz (Advisor L.A. Dobrzański), Structure and properties of laser remelted and alloyed surface layers of 32CrMoV12-28 tool steel, PhD theses, Silesian University of Technology, Gliwice, 2005 (in Polish).
• [322] M. Piec (Advisor L.A. Dobrzański), Structure and properties of laser remelted and alloyed surface layers of X38CrMoV5-3 tool steel, PhD theses, Silesian University of Technology, Gliwice, 2005 (in Polish).
• [323] E. Jonda (Advisor L.A. Dobrzański), The effect of laser remelting and alloying on the structure and properties of surface layers of X40CrMoV5-1 steel, PhD theses, Silesian University of Technology, Gliwice, 2007 (in Polish).
• [324] M. Bonek, L.A. Dobrzański, Gradient surface layers on tool steels performed by laser surface alloying process, Bronze Medal on 7th International Warsaw Invention Show IWIS 2013, Warsaw, Poland, 8- 10.10.2013.
• [325] Z. Brytan, L.A. Dobrzański, PM stainless steel with improved mechanical and corrosion properties obtained through laser surface alloying with HDPL laser, Gold Medal on International Innovation & Invention Expo, Macau, China, 28-30.06.2013.
• [326] L.A. Dobrzański, Z. Brytan, PM stainless steel with improved mechanical and corrosion properties obtained through laser surface alloying with HDPL laser, Gold Medal on 41st International Exhibition of Inventions of Geneva, 2013 Switzerland, 10- 14.04.2013.
• [327] M. Bonek, L.A. Dobrzański, Gradient surface layers on tool steels performed by laser surface alloying process, Gold Medal on 16th Moscow International Salon of Inventions and Innovation Technologies «Archimedes» Moscow, Russia, 2-5.04.2013.
• [328] M. Bonek, L.A. Dobrzański, Gradient surface layers on tool steels performed by laser surface alloying process, Gold Medal on 5th Fair International Inventions and Innovations Exhibition FINEX 2013, Teheran, Iran, 4-7.02.2013.
• [329] K. Labisz, L.A. Dobrzański, Laser treated surface of hot work tool steels alloyed with ceramic powders, Gold Medal on 8th Seoul International Invention Fair 2012, Seoul, Korea, 29.11-2.12.2012.
• [330] M. Bonek, L.A. Dobrzański, Gradient surface layers on tool steels performed by laser surface alloying process, Silver Medal on 65th International Trade Fair Ideas - Inventions - New Products, iENA 2013, Nuremberg, Germany, 30.10-2.11.2013.
• [331] Z. Brytan, L.A. Dobrzański, PM stainless steel with improved mechanical and corrosion properties obtained through laser surface alloying with HDPL laser, Bronze Medal on Malaysia Technology Expo MTE 2013, Kuala Lumpur, Malaysia, 21-23.02. 2013.
• [332] M. Bonek, L.A. Dobrzański, Gradient surface layers on tool steels performed by laser surface alloying process, Gold Medal on IX International Salon of Inventions and New Technologies "NEW TIME", Sevastopol, Ukraine, 26-28.09.2013.
• [333] M. Bonek, L.A. Dobrzański, Metal matrix composite layer on tool steels performed by laser surface remelting and/or hard particles alloying process, Bronze Medal on 8th Seoul International Invention Fair 2012, Seoul, Korea, 29.11-2.12.2012.
• [334] L.A. Dobrzański, E. Jonda, K. Labisz, Laser Surface Engineering of Hot-Work Tool Steels, Bronze Medal on 11th Inventions and Innovations Malaysia Technology Expo 2012 (MTE2012), Kuala Lumpur, Malaysia, 16-18.02.2012.
• [335] J. Domagała-Dubiel (Advisor L.A. Dobrzański), The structure and properties of laser remelted and melted layers on Mg-Al-Zn cast alloys, PhD theses, Silesian University of Technology, Gliwice, 2010 (in Polish).
• [336] S. Malara (Advisor L.A. Dobrzański), Structure and surface properties of Mg-Al-Zn cast alloys with laser remelted ceramic particles, PhD theses, Silesian University of Technology, Gliwice, 2010 (in Polish).
• [337] W. Pakieła (Advisor L.A. Dobrzański), Influence of laser remelting of silicon and tungsten carbides on the structure and properties of surface layer of AlMg alloys, PhD theses, Silesian University of Technology, Gliwice, 2015 (in Polish).
• [338] K. Labisz, T. Tański. L.A. Dobrzański, Laser remelting and alloying of aluminium cast alloys surface layers with ceramic powders, Gold Medal on 24th International Invention, Innovation & Technology Exhibition "ITEX 2012", Kuala Lumpur, Malaysia, 9-11.05.2013.
• [339] T. Tański, L.A. Dobrzański, W. Pakieła, K. Labisz, M. Roszak, B. Tomiczek, Structure and properties of the aluminium alloy AlSi12CuNiMg after laser surface treatment, Advanced Materials Research 1036 (2014) 40-45.
• [340] L.A. Dobrzański, T. Tański, S. Malara, J. Domagała, A. Klimpel, Laser Surface Treatment of Mg-Al-Zn Alloys, Strojarstvo 53/1 (2011) 5-10.
• [341] K. Labisz, T. Tański, L.A. Dobrzański, D. Janicki, K. Korcina, HPDL laser alloying of Al-Si-Cu alloy with Al2O3 powder, Archives of Materials Science and Engineering 63/1 (2013) 36-45.
• [342] K. Labisz, T. Tański, L.A. Dobrzański, HPDL laser alloying of heat treated Al-Si-Cu alloy, Archives of Materials Science and Engineering 54/1 (2012) 13- 21.
• [343] L.A. Dobrzański, J. Domagała, T. Tański. A. Klimpel, D. Janicki, Laser surface treatment of cast magnesium alloys, Archives of Materials Science and Engineering 35/2 (2009) 101-106.
• [344] L.A. Dobrzański, S. Malara, J. Domagała, T. Tański, K. Gołombek, Influence of the laser modification of surface on properties and structure of magnesium alloys, Archives of Materials Science and Engineering 35/2 (2009) 95-100.
• [345] L.A. Dobrzański, J. Domagała, S. Malara, T. Tański, W. Kwaśny, Structure changes and mechanical properties of laser alloyed magnesium cast alloys, Archives of Materials Science and Engineering 35/2 (2009) 77-82.
• [346] L.A. Dobrzański, S. Malara, T. Tański, A. Klimpel, D. Janicki, Laser surface treatment of magnesium alloys with silicon carbide powder, Archives of Materials Science and Engineering 35//1 (2009) 54-60.
• [347] L.A. Dobrzański, J. Domagała, T. Tański, A. Klimpel, D. Janicki, Characteristic of Mg-Al-Zn alloys after laser treatment, Archives of Materials Science and Engineering 34/2 (2008) 69-74.
• [348] L.A. Dobrzański, J. Domagała, T. Tański, A. Klimpel, D. Janicki, Laser surface treatment of magnesium alloy with WC powder, Archives of Materials Science and Engineering 30/2 (2008) 113-116.
• [349] L.A. Dobrzański, T. Tański, J. Domagała, S. Malara, M. Król, Effect of high power diode laser surface melting and cooling rate on microstructure and properties of magnesium alloy, Journal of Achievements in Materials and Manufacturing Engineering 37/2 (2009) 238-257.
• [350] L.A. Dobrzański, S. Malara, T. Tański, Laser surface treatment of magnesium alloys with aluminium oxide powder, Journal of Achievements in Materials and Manufacturing Engineering 37/1 (2009) 70-77.
• [351] L.A. Dobrzański, J. Domagała-Dubiel, K. Labisz, E. Hajduczek, A. Klimpel, Effect of laser treatment on microstructure and properties of cast magnesium alloys, Journal of Achievements in Materials and Manufacturing Engineering 37/1 (2009) 57-64.
• [352] L.A. Dobrzański, T. Tański, J. Domagała, M. Król, S. Malara, A. Klimpel, Structure and properties of the Mg alloys in as-cast state and after heat and laser treatment, Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 123-147.
• [353] L.A. Dobrzański, J. Domagała, T. Tański, A. Klimpel, D. Janicki, Laser surface treatment of magnesium alloy with WC and TiC powders using HPDL, Journal of Achievements in Materials and Manufacturing Engineering 28/2 (2008) 179-186.
• [354] L.A. Dobrzański, T. Tański, K. Labisz, W. Pakieła, Structure and properties of AlMg5Si2Mn after laser feeding, Herald of Khmelnytskyi National University, Technical Sciences 3/213 (2014) 125-128.
• [355] L.A. Dobrzański, T. Tański, S. Malara, Effect of the heat and surface laser treatment on the corrosion degradation of the Mg-Al alloys, Materials Engineering – Materiálové inžinierstvo 18/3 (2011) 85-92.
• [356] A. Drygała, L.A. Dobrzański, M. Szindler, M.M. Szindler, M. Prokopiuk vel Prokopowicz, E. Jonda, Influence of laser texturization surface and atomic layer deposition on optical properties of polycrystalline silicon, International Journal of Hydrogen Energy 41 (2016) (in print).
• [357] L.A. Dobrzański, M. Szindler, M.M. Szindler, B. Hajduk, S. Kotowicz, The impact of atomic layer deposition technological parameters on optical properties and morphology of Al2O3 thin films, Optica Applicata 45/4 (2015) 573-583.
• [358] M. Musztyfaga-Staszuk, L.A. Dobrzański, The use of laser technology to shape properties of the contacts of silicon solar cells and their structure, Central European Journal of Physics 12/12 (2014) 836-842.
• [359] L.A. Dobrzański, M. Szindler, A. Drygała, M.M. Szindler, Silicon solar cells with Al2O3 antireflection coating, Central European Journal of Physics 12/9 (2014) 666-670.
• [360] M. Musztyfaga-Staszuk, L.A. Dobrzański, S. Rusz, M. Staszuk, Application examples for the different measurement modes of electrical properties of the solar cells, Archives of Metallurgy and Materials 59/1 (2014) 247-251.
• [361] L.A. Dobrzański, M. Musztyfaga, A. Drygała, Final Manufacturing Process of Front Side Metallisation on Silicon Solar Cells Using Conventional and Unconventional Techniques, Strojniški Vestnik – Journal of Mechanical Engineering 59/3 (2013) 175- 182.
• [362] L.A. Dobrzański, A. Drygała, K. Gołombek, P. Panek, E. Bielańska, P. Zięba, Laser surface treatment of multicrystalline silicon for enhancing optical properties, Journal of Materials Processing Technology 201/1-3 (2008) 291-296.
• [363] L.A. Dobrzański, A. Drygała, Laser processing of multicrystalline silicon for texturization of solar cells, Journal of Materials Processing Technology 191/1-3 (2007) 228-231.
• [364] L.A. Dobrzański, A. Drygała, Influence of laser processing on polycrystalline silicon surface, Materials Science Forum 706-709 (2012) 829-834.
• [365] L.A. Dobrzański, M. Szindler, M.M. Szindler, Surface morphology and optical properties of Al2O3 thin films deposited by ALD method, Archives of Materials Science and Engineering 73/1 (2015) 18-24.
• [366] L.A. Dobrzański, M. Szindler, M.M. Szindler, B. Hajduk, Sol-gel Al2O3 antireflection coatings for silicon solar cells, Archives of Materials Science and Engineering 67/1 (2014) 24-31.
• [367] M. Musztyfaga, L.A. Dobrzański, S. Rusz, L. Prokop, S. Misak, Application of modern technique to set the parameters of the monocrystalline solar cell and its structure, Przegląd Elektrotechniczny 89/11 (2013) 24-26.
• [368] J. Konieczny, L.A. Dobrzański, A. Drygała, J. Lelątko, TEM investigations of laser texturized polycrystalline silicon solar cell, Archives of Materials Science and Engineering 56/1 (2012) 22-29.
• [369] L.A. Dobrzański, A. Drygała, M. Giedroć, Application of crystalline silicon solar cells in photovoltaic modules, Archives of Materials Science and Engineering 44/2 (2010) 96-103.
• [370] L.A. Dobrzański, A. Drygała, P. Panek, M. Lipiński, P. Zięba, Development of the laser method of multicrystalline silicon surface texturization, Archives of Materials Science and Engineering 38/1 (2009) 5-11.
• [371] L.A. Dobrzański, M. Szczęsna, M. Szindler, A. Drygała, Electrical properties mono- and polycrystalline silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering 59/2 (2013) 67-74.
• [372] L.A. Dobrzański, M. Szindler, Al2O3 antireflection coatings for silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering 59/1 (2013) 13-19.
• [373] L.A. Dobrzański, M. Musztyfaga, M. Giedroć, P. Panek, Investigation of various properties of monocrystalline silicon solar cell, Journal of Achievements in Materials and Manufacturing Engineering 55/2 (2012) 307-315.
• [374] L.A. Dobrzański, A. Drygała, M. Giedroć, M. Macek, Monocrystalline silicon solar cells applied in photovoltaic system, Journal of Achievements in Materials and Manufacturing Engineering 53/1 (2012) 7-13.
• [375] L.A. Dobrzański, M. Szindler, Sol gel TiO2 antireflection coatings for silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering 52/1 (2012) 7-14.
• [376] L.A. Dobrzański, M. Musztyfaga, Effect of the front electrode metallisation process on electrical parameters of a silicon solar cell, Journal of Achievements in Materials and Manufacturing Engineering 48/2 (2011) 115-144.
• [377] L.A. Dobrzański, M. Musztyfaga, A. Drygała, W. Kwaśny, P. Panek, Structure and electrical properties of screen printed contacts on silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering 45/2 (2011) 141-147.
• [378] L.A. Dobrzański, M. Musztyfaga, A. Drygała, Selective laser sintering method of manufacturing front electrode of silicon solar cell, Journal of Achievements in Materials and Manufacturing Engineering 42/1-2 (2010) 111-119.
• [379] L.A. Dobrzański, M. Musztyfaga, A. Drygała, P. Panek, Investigation of the screen printed contacts of silicon solar cells using Transmission Line Model, Journal of Achievements in Materials and Manufacturing Engineering 41/1-2 (2010) 57-65.
• [380] L.A. Dobrzański, A. Drygała, A. Januszka, Formation of photovoltaic modules based on polycrystalline solar cells, Journal of Achievements in Materials and Manufacturing Engineering 37/2 (2009) 607- 616.
• [381] J. Weszka, L.A. Dobrzański, P. Jarka, J. Jurusik, B. Hajduk, M. Bruma, J. Konieczny, D. Mańkowski, Studying of spin-coated oxad-Si properties, Journal of Achievements in Materials and Manufacturing Engineering 37/2 (2009) 505-511.
• [382] L.A. Dobrzański, A. Drygała, Surface texturing of multicrystalline silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering 31/1 (2008) 77-82.
• [383] L.A. Dobrzański, A. Drygała, Laser texturisation in technology of multicrystalline silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering 29/1 (2008) 7-14.
• [384] L.A. Dobrzański, A. Drygała, P. Panek, M. Lipiński, P. Zięba, Application of laser in multicrystalline silicon surface processing, Journal of Achievements in Materials and Manufacturing Engineering 24/2 (2007) 179-182.
• [385] L.A. Dobrzański, A. Drygała, J. Konieczny, J. Lelątko, Structure of laser treated multicrystalline silicon wafers, Journal of Achievements in Materials and Manufacturing Engineering 21/2 (2007) 69-72.
• [386] L.A. Dobrzański, L. Wosińska, B. Dołżańska, A. Drygała, Comparison of electrical characteristics of silicon solar cells, Journal of Achievements in Materials and Manufacturing Engineering 18/1-2 (2006) 215-218.
• [387] L.A. Dobrzański, A. Drygała, Processing of silicon surface by Nd:YAG laser, Journal of Achievements in Materials and Manufacturing Engineering 17/1-2 (2006) 321-324.
• [388] L.A. Dobrzański, M. Musztyfaga-Staszuk, M. Staszuk, Metallisation technology of silicon solar cells using the convectional and laser technique, Pamukkale University Journal of Engineering Sciences 19/7 (2013) 275-280.
• [389] L.A. Dobrzański, M. Szindler, Sol-gel and ALD antireflection coatings or silicon solar cells, Elektronika – konstrukcje, technologie, zastosowania 53/8 (2012) 125-127.
• [390] L.A. Dobrzański, A. Drygała, M. Musztyfaga, Laser texturing and microtreatment of silicon for photovoltaics, Elektronika – konstrukcje, technologie, zastosowania 53/6 (2012) 89-91.
• [391] A. Drygała (Advisor L.A. Dobrzański), The influence of laser texturisation on photovoltaic properties of polycrystalline silicon, PhD theses, Silesian University of Technology, Gliwice, 2008 (in Polish).
• [392] M. Musztyfaga (Advisor L.A. Dobrzański), Laser micromachining of elements of silicon photovoltaic cells, PhD theses, Silesian University of Technology, Gliwice, 2011 (in Polish).
• [393] M. Szindler (Advisor L.A. Dobrzański), Structure and properties of nanostructural antireflective layers obtained by ALD and sol-gel method on silicon photovoltaic cells, PhD theses, Silesian University of Technology, Gliwice, 2014 (in Polish).
• [394] L.A. Dobrzański, A. Drygała, M. Musztyfaga, Laser Texturing and Microtreatment of Silicon for Photovoltaics, Gold Medal on 11th Inventions and Innovations Malaysia Technology Expo 2012 (MTE2012), Kuala Lumpur, Malaysia, 16-18.02.2012.
• [395] L.A. Dobrzański, M. Musztyfaga, M. Staszuk, The instrument for measuring resistance of a front electrode photovoltaic cell using the TLM method, Silver Medal on 64th International Trade Fair Ideas - Inventions - New Products, iENA 2012, Nuremberg, Germany, 1-4.11.2012.
• [396] L.A. Dobrzański, A. Drygała, Laser surface texturing of polycrystalline silicon solar cell, Silver Medal on 64th International Trade Fair Ideas - Inventions - New Products, iENA 2012, Nuremberg, Germany, 1- 4.11.2012.
• [397] L.A. Dobrzański, A. Drygała, Laser texturing of polycrystalline silicon for solar cells, Silver Medal on 6th International Warsaw Invention Show IWIS 2012, Warsaw, Poland, 16-19.10.2012.
• [398] L.A. Dobrzański, M. Musztyfaga, M. Staszuk, The instrument for measuring resistance of a front electrode photovoltaic cell using the TLM method, Silver Medal on 6th International Warsaw Invention Show IWIS 2012, Warsaw, Poland, 16-19.10.2012.
• [399] L.A. Dobrzański, A. Drygała, M. Musztyfaga, Microtreatment of Silicon for Photovoltaics, Bronze Medal on 7th Seoul International Invention Fair 2011, Seoul, Korea, 1-4.12.2011.
• [400] P. Malara, T.G. Gaweł, L.B. Dobrzański, A. Achtelik, L.A. Dobrzański, M. Musztyfaga, M. Staszuk, Electrode measuring stand, especially the front of the silicon solar cells, Patent Office Bulletin 41/18 (2013) 36, Patent description PL 219754, 2015.
• [401] L.A. Dobrzański, A. Drygała, M. Szindler, M.M. Szindler, J. Wyrwał, E. Jonda, Silicon photovoltaic cell and its manufacturing method, Patent Application P 410404 of 05.12.2014.
• [402] L.A. Dobrzański, M. Czaja, W. Borek, K. Labisz, T. Tański, Influence of hot-working conditions on a structure of X11MnSiAl17-1-3 steel for automotive industry, International Journal of Materials and Product Technology 51/3 (2015) 264-280.
• [403] L.A. Dobrzański, W. Borek, Thermo-mechanical treatment of Fe-Mn-(Al, Si) TRIP/TWIP steels, Archives of Civil and Mechanical Engineering 12/3 (2012) 299-304.
• [404] L.A. Dobrzański, W. Borek, J. Mazurkiewicz, Influence of Thermo-Mechanical Treatments on Structure and Mechanical Properties of High-Mn Steel, Advanced Materials Research 1127 (2015) 113-119.
• [405] L.A. Dobrzański, M. Czaja, W. Borek, K. Labisz, T. Tański, Influence of hot-working conditions on a structure of X11MnSiAl17-1-3 steel, Advanced Materials Research 1036 (2014) 122-127.
• [406] L.A. Dobrzański, W. Borek, J. Mazurkiewicz, Mechanical properties of high-manganese austenitic TWIP-type steel, Materials Science Forum 783-786 (2014) 27-32.
• [407] L.A. Dobrzański, W. Borek, Hot-rolling of advanced high-manganese C-Mn-Si-Al steels, Materials Science Forum 706-709 (2012) 2053-2058.
• [408] L.A. Dobrzański, W. Borek, Hot-Working Behaviour of Advanced High-Manganese C-Mn-Si-Al Steels, Materials Science Forum 654-656 (2010) 266-269.
• [409] L.A. Dobrzański, A. Grajcar, W. Borek, Microstructure evolution of C-Mn-Si-Al-Nb high-manganese steel during the thermomechanical processing, Materials Science Forum 638-642 (2010) 3224-3229.
• [410] L.A. Dobrzański, W. Borek, M. Czaja, J. Mazurkiewicz, Structure of X11MnSiAl17-1-3 steel after hot-rolling and Gleeble simulations, Archives of Materials Science and Engineering 61/1 (2013) 13-21.
• [411] L.A. Dobrzański, A. Grajcar, W. Borek, Microstructure evolution of high-manganese steel during the thermomechanical processing, Archives of Materials Science and Engineering 37/2 (2009) 69-76.
• [412] L.A. Dobrzański, M. Czaja, W. Borek, K. Labisz, Influence of thermo-plastic deformation on grain size of high-manganese austenitic X11MnSiAl17-3-1 steel, Journal of Achievements in Materials and Manufacturing Engineering 61/2 (2013) 169-174.
• [413] L.A. Dobrzański, W. Borek, Mechanical properties and microstructure of high-manganese TWIP, TRIP and TRIPLEX type steels, Journal of Achievements in Materials and Manufacturing Engineering 55/2 (2012) 230-238.
• [414] L.A. Dobrzański, W. Borek, M. Ondrula, Thermomechanical processing and microstructure evolution of high-manganese austenitic TRIP-type steels, Journal of Achievements in Materials and Manufacturing Engineering 53/2 (2012) 59-66.
• [415] L.A. Dobrzański, W Borek, Hot deformation and recrystallization of advanced high-manganese austenitic TWIP steels, Journal of Achievements in Materials and Manufacturing Engineering 46/1 (2011) 71-78.
• [416] L.A. Dobrzański, W. Borek, Hot-working of advanced high-manganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering 43/2 (2010) 507-526.
• [417] L.A. Dobrzański, W. Borek, Microstructure forming processes of the 26Mn-3Si-3Al-Nb-Ti steel during hot-working conditions, Journal of Achievements in Materials and Manufacturing Engineering 40/1 (2010) 25-32.
• [418] L.A. Dobrzański, W. Borek, Processes forming the microstructure evolution of high-manganese austenitic steel in hot-working conditions, Journal of Achievements in Materials and Manufacturing Engineering 37/2 (2009) 397-407.
• [419] L.A. Dobrzański, A. Grajcar, W. Borek, Microstructure evolution and phase composition of highmanganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 218-225.
• [420] L.A. Dobrzański, A. Grajcar, W. Borek, Hotworking behaviour of high-manganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering 31/1 (2008) 7-14.
• [421] L.A. Dobrzański, A. Grajcar, W. Borek, Influence of hot-working conditions on a structure of highmanganese austenitic steels, Journal of Achievements in Materials and Manufacturing Engineering 29/2 (2008) 139-142.
• [422] L.A. Dobrzański, W. Borek, J. Mazurkiewicz, Structure and Mechanical Properties of High-Manganese Steels, in: S. Hashmi (ed.), Comprehensive Materials Processing, G.F. Batalha (ed.), Vol. 2, Materials Modeling and Characterization, Elsevier Ltd., 2014, 199-218.
• [423] W. Borek (Advisor L.A. Dobrzański), The importance of twinning in the formation of structure and properties of austenite high-manganese steels, PhD theses, Silesian University of Technology, Gliwice, 2010 (in Polish).
• [424] M. Czaja (Advisor L.A. Dobrzański), Cracking prevention mechanisms of X11MnSiAl17-1-3 austenite steel in conditions of dynamic cold plastic deformation, PhD theses, Silesian University of Technology, Gliwice, 2014 (in Polish).
• [425] L.A. Dobrzański, W. Borek, High-manganese steels with high strain energy per unit volume for automotive industry, Silver Medal on IX International Salon of Inventions and New Technologies "NEW TIME", Sevastopol, Ukraine, 26-28.09.2013.
• [426] L.A. Dobrzański, W. Borek, High-manganese steels with high strain energy per unit volume for automotive industry, Silver Medal on 16th Moscow International Salon of Inventions and Innovation Technologies «Archimedes» Moscow, Russia, 2- 5.04.2013.
• [427] L.A. Dobrzański, W. Borek, High-manganese steels with high strain energy per unit volume for automotive industry, Silver Medal on 64th International Trade Fair Ideas - Inventions - New Products, iENA 2012, Nuremberg, Germany, 1-4.11.2012.
• [428] L.A. Dobrzański, W. Borek, TWIP steels with high strain energy per unit volume for automotive industry, Bronze Medal on Global Inventions and Innovations Exhibitions Innova Cities LatinoAmerica, ICLA 2015, Foz do Iguaçu, Brazil, 10-12.12.2015.
• [429] L.A. Dobrzański, W. Borek, High-manganese austenitic steels with high strain energy per unit volume for automotive industry, Bronze Medal and Special award on 6th International Warsaw Invention Show IWIS 2012, Warsaw, Poland, 16-19.10.2012.
• [430] L.A. Dobrzański, W. Borek, High-manganese steels with high strain energy per unit volume for automotive industry, Bronze Medal on 8th Taipei International Invention Show & Technomart for Intellectual Property, Patents, Trademarks, Inventions, INST 2012, Taipei, Taiwan, 20-23.09.2012.
• [431] L.A. Dobrzański, W. Borek, Steels with high strain energy per unit volume for automotive industry, Bronze Medal on 23rd International Invention, Innovation & Technology Exhibition "ITEX 2012", Kuala Lumpur, Malaysia, 17-19.05.2012.
• [432] L.A. Dobrzański, W. Borek, TWIP steels with high strain energy per unit volume for automotive industry, Bronze Medal on 9th International Warsaw Invention Show IWIS 2015, Warsaw, Poland, 12- 14.10.2015.
• [433] L.A. Dobrzański, W. Borek, Steels with high strain energy per unit volume for automotive industry, Bronze Medal on 8th Seoul International Invention Fair 2012, Seoul, Korea, 29.11-2.12.2012.
• [434] L.A. Dobrzański et al., Investigations of structure and properties of newly created porous biomimetic materials fabricated by selective laser sintering, BIOLASIN, Project UMO-2013/08/M/ST8/00818, Silesian University of Technology, Gliwice, 2013- 2016.
• [435] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, T.G. Gaweł, A. Achtelik-Franczak, Selective laser sintering and melting of pristine titanium and titanium Ti6Al4V alloy powders and selection of chemical environment for etching of such materials, Archives of Metallurgy and Materials 60/3 (2015) 2039-2045.
• [436] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, P. Malara, T. Gaweł, L.B. Dobrzański, A. AchtelikFranczak, Fabrication of scaffolds from Ti6Al4V powders using the computer aided laser method, Archives of Metallurgy and Materials 60/2 (2015) 1065-1070.
• [437] M. Kremzer, L.A. Dobrzański, M. Dziekońska, M. Macek, Atomic layer deposition of TiO2 onto porous biomaterials, Archives of Materials Science and Engineering 75/2 (2015) 63-69.
• [438] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, M. Szindler, A. Achtelik-Franczak, W. Pakieła, Atomic layer deposition of TiO2 onto porous biomaterials, Archives of Materials Science and Engineering 75/1 (2015) 5-11.
• [439] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, A. Achtelik-Franczak, L.B. Dobrzański, Comparative analysis of mechanical properties of scaffolds sintered from Ti and Ti6Al4V powders, Archives of Materials Science and Engineering 73/2 (2015) 69- 81.
• [440] M. Król, M. Kujawa, L.A. Dobrzański, T. Tański, Influence of technological parameters on additive manufacturing steel parts in Selective Laser Sintering, Archives of Materials Science and Engineering 67/2 (2014) 84-92.
• [441] M. Król, L.A. Dobrzański, Ł. Reimann, I. Czaja, Surface quality in selective laser melting of metal powders, Archives of Materials Science and Engineering 60/2 (2013) 87-92.
• [442] L.A. Dobrzański, A. Achtelik-Franczak, M. Król, Computer aided design in Selective Laser Sintering (SLS) – application in medicine, Journal of Achievements in Materials and Manufacturing Engineering 60/2 (2013) 66-75.
• [443] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, P. Malara, T.G. Gaweł, L.B. Dobrzański, A. AchtelikFranczak, Bone implant scaffold, Patent Application P 414424 of 19.10.2015.
• [444] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, P. Malara, T.G. Gaweł, L.B. Dobrzański, A. AchtelikFranczak, Implant scaffold and a prosthesis of anatomical elements of a dental system and craniofacial bone, Patent Application P 414423 of 19.10.2015.
• [445] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, P. Malara, T.G. Gaweł, L.B. Dobrzański, A. AchtelikFranczak, Composite fabricated by computer-aided laser methods for craniofacial implants and its manufacturing method, Patent Application P 411689 of 23.03.2015.
• [446] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, P. Malara, L.B. Dobrzański, A. Achtelik-Franczak: Biological and engineering composites for regenerative medicine, Patent Application of 3.11.2015.
• [447] A. Achtelik-Franczak (Advisor L.A. Dobrzański), Structure and properties of porous selectively laser sintered titanium, PhD theses submitted for evaluation, Silesian University of Technology, Gliwice (in Polish).
• [448] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, P. Malara, T.G. Gaweł, L.B. Dobrzański, A. AchtelikFranczak, The novel composite consisting of a metallic scaffold, manufactured using a computer aided laser method, coated with thin polymeric surface layer for medical applications, Semi Grand Prize Global on Inventions and Innovations Exhibitions Innova Cities LatinoAmerica, ICLA 2015, Foz do Iguaçu, Brazil, 10-12.12.2015.
• [449] L.A. Dobrzański, A.D. Dobrzańska-Danikiewicz, P. Malara, T.G. Gaweł, L.B. Dobrzański, A. AchtelikFranczak, The novel composite consisting of a metallic scaffold, manufactured using a computer aided laser method, coated with thin polymeric surface layer for medical applications, Gold Medal on 9th International Warsaw Invention Show IWIS 2015, Warsaw, Poland, 12-14.10.2015.
• [450] L.A. Dobrzański, A. Hudecki, Polymer nanofibers produced by electrospinning applied in regenerative medicine, International OCSCO World Press, Gliwice, Open Access Library V/3 (2015) 1-168.
• [451] L.A. Dobrzański, A. Hudecki, G. Chladek, W. Król, A. Mertas, Biodegradable and antimicrobial polycaprolactone nanofibers with and without silver precipitates, Archives of Materials Science and Engineering 76/1 (2015) 5-26.
• [452] L.A. Dobrzański, A. Hudecki, G. Chladek, W. Król, A. Mertas, Surface properties and antimicrobial activity of composite nanofibers of polycaprolactone with silver precipitations, Archives of Materials Science and Engineering 70/2 (2014) 53-60.
• [453] L.A. Dobrzański, A. Hudecki, Structure, geometrical characteristics and properties of biodegradable micro- and polycaprolactone nanofibers, Archives of Materials Science and Engineering 70/1 (2014) 5-13.
• [454] L.A. Dobrzański, Overview and general ideas of the development of constructions, materials, technologies and clinical applications of scaffolds engineering for regenerative medicine, Archives of Materials Science and Engineering 69/2 (2014) 53-80.
• [455] L.A. Dobrzański, B. Nieradka, M. Macek, W. Matysiak, Influence of the electrospinning parameters on the morphology of composite nanofibers, Archives of Materials Science and Engineering 69/1 (2014) 32-37.
• [456] A. Hudecki, M. Pawlyta, L.A. Dobrzański G. Chladek, Micro and ceramic nanoparticles surface properties examination with gas adsorption method and microscopic transmission, Journal of Achievements in Materials and Manufacturing Engineering 61/2 (2013) 257-262.
• [457] L.A. Dobrzański, M Pawlyta, A. Hudecki, Conceptual study on a new generation of the highinnovative advanced porous and composite nanostructural functional materials with nanofibers. Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 550-565.
• [458] L.A. Dobrzański, A. Hudecki, G. Chladek, W. Król, A. Mertas, Biodegradable and antimicrobial polycaprolactone nanofibers with and without silver precipitates, XXIV International Materials Research Congress, IMRC’2015, Cancun, Mexico; 2015.
• [459] L.A. Dobrzański, A. Hudecki, G. Chladek, W. Król, A. Mertas, Fabrication, Structure and Properties of the Electrospinned Nanofibers and Nanocomposites for Medical Applications, BIT’s 5th Annual World Congress of Nano Science and Technology on “Small Size, Big World”, Nano S&T-2015, Xi’an, China, 2015.
• [460] L.A. Dobrzański, Advanced electron microscopy methods aiding the development of surface engineering of materials, World Congress on Microscopy: Instrumentation, Techniques and Applications in Life Sciences and Materials Sciences, WCM 2015, Kottayam, India, 2015.
• [461] L.A. Dobrzański, A. Hudecki, G. Chladek, W. Król, A. Mertas, Electrospinned nanofibers and nanocomposites for regenerative medicine, BIT’s 6th Annual World Gene Convention-2015 on “More Advanced, More Healthy and More Safety”, WGC-2015, Qingdao, China, 2015.
• [462] L.A. Dobrzański, A. Hudecki, Composite nanofibers with bioactive core and antibacterial coating for tissue scaffolds produced by electrospinning, 22nd International Scientific Conference on "Achievements in mechanical and Materials Engineering", AMME’2015, Zakopane, 2015.
• [463] L.A. Dobrzański, A. Hudecki, Fabrication method of composite material with bioactive and bactericidal properties, Patent Application P 410452, 2014. [464] L.A. Dobrzański, A. Hudecki, Fabrication method of composite material with bioactive and bactericidal properties, Patent Application P 410427, 2014.
• [465] A. Hudecki (Advisor L.A. Dobrzański), Composite nanofibers with a bioactive core and an antibacterial coating on the tissue scaffold, PhD theses, Silesian University of Technology, Gliwice, 2015 (in Polish).
• [466] L.A. Dobrzański, A. Hudecki, Composite material with bioactive and bacteriocidal properties and the way of its manufacturing, Silver Medal on Global Inventions and Innovations Exhibitions Innova Cities LatinoAmerica, ICLA 2015, Foz do Iguaçu, Brazil, 10-12.12.2015.
• [467] L.A. Dobrzański, A. Hudecki, Composite material with bioactive and bacteriocidal properties and the way of its manufacturing, Silver Medal on 9th International Warsaw Invention Show IWIS 2015, Warsaw, Poland, 12-14.10.2015.
• [468] L.A. Dobrzański, A. Hudecki, Composite material with bioactive and bacteriocidal and the way of its manufacturing, Bronze Medal on 26th International Invention, Innovation & Technology Exhibition "ITEX 2015", Kuala Lumpur, Malaysia, 21-23.05. 2015.