Technology for porous ammonium nitrate production: modeling of drying machines’ operating modes

• Autorzy: Artyukhova Nadiia , Krmela Jan , Artyukhov Artem , Krmelová Vladimíra , Gavendová Mária , Bakošová Alžbeta

Identyfikatory

DOI

10.24425/bpasts.2021.137585

• Języki publikacji: EN

Abstrakty

EN

The article deals with the technological principles regarding the final drying process of the porous ammonium nitrate (PAN) granules in multistage gravitational shelf dryers. The data on the dryer’s optimal technological operating modes are obtained. PAN samples are studied; the regularity of the porous structure change in the granule depending on the dryer’s hydrodynamic and thermodynamic conditions is established. Experimental data obtained during the research will be used to create a methodology for the engineering calculation of gravitational shelf dryers. Moreover, the data on the optimal operating conditions of the drying machines at the final drying stage will be used to improve the technology to form porous granules from agricultural ammonium nitrate.

Słowa kluczowe

EN

porous ammonium nitrate drying machine; operating mode; software

PL

porowata maszyna do suszenia saletry amonowej; tryb pracy; oprogramowanie

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2021
• Tom: Vol. 69, nr 4
• Strony: art. no. e137585
• Opis fizyczny: Bibliogr. 39 poz., rys., tab.

Twórcy

autor

Artyukhova Nadiia

• Sumy State University, Oleg Balatskyi Academic and Research Institute of Finance, Economics and Management, Department of Marketing, Rymskogo-Korsakova st. 2, 40007, Sumy, Ukraine

autor

Krmela Jan

• Alexander Dubček University of Trenčín, Faculty of Industrial Technologies in Púchov, Department of Numerical Methods and Computational Modeling, Ivana Krasku 491/30, 020 01 Púchov, Slovakia

• https://orcid.org/0000-0001-9767-9870

autor

Artyukhov Artem

• Sumy State University, Oleg Balatskyi Academic and Research Institute of Finance, Economics and Management, Department of Marketing, Rymskogo-Korsakova st. 2, 40007, Sumy, Ukraine

• https://orcid.org/0000-0003-1112-6891

autor

Krmelová Vladimíra

• Alexander Dubček University of Trenčín, Faculty of Industrial Technologies in Púchov, Department of Material Technologies and Environment, Ivana Krasku 491/30, 020 01 Púchov, Slovakia

autor

Gavendová Mária

• Alexander Dubček University of Trenčín, Faculty of Industrial Technologies in Púchov, Department of Material Technologies and Environment, Ivana Krasku 491/30, 020 01 Púchov, Slovakia

autor

Bakošová Alžbeta

• Alexander Dubček University of Trenčín, Faculty of Industrial Technologies in Púchov, Department of Numerical Methods and Computational Modeling, Ivana Krasku 491/30, 020 01 Púchov, Slovakia

Bibliografia

• [1] T.J. Janssen, Explosive materials: classification, composition and properties, Nova Science Publishers, Inc., New York, 2011.
• [2] Patent No. 5540793 US: Porous prilled ammonium nitrate, 1996.
• [3] Patent No. 2118074, CA: Porous prilled ammonium nitrate, 2002.
• [4] Patent No. 2093727, CA: Hardened porous ammonium nitrate, 2004.
• [5] Patent No. 2004‒256365, JP: Method of manufacturing porous granular ammonium nitrate, 2004.
• [6] Patent No. 2005‒350276, JP: Method for producing porous granular ammonium nitrate, 2005.
• [7] Patent No. 2221717, CA: Procedure and installation for the manufacture of porous ammonium nitrate, 2005.
• [8] Patent No. 102093146, CN: Microporous granular ammonium nitrate and preparation methods thereof, 2011.
• [9] Patent No. 102173968, CN: Production method of porous granular ammonium nitrate, 2011.
• [10] Patent No. 2452719, RU: Device for production of porous granulated ammonium nitrate and method for production of porous granulated ammonium nitrate, 2012.
• [11] Patent No. 391973, PL: Method for producing granulated porous ammonium nitrate, 2012.
• [12] Patent No. 103896695, CN: Microporous pelletal ammonium nitrate and preparation method thereof, 2014.
• [13] Patent No. 204384319, CN: Device for producing porous ammonium nitrate and industrial ammonium nitrate, 2015.
• [14] Patent No. 204237724, CN: Recycling device for caked ammonium nitrate during production of porous ammonium nitrate, 2015.
• [15] Patent No. 104311372, CN: Porous ammonium nitrate production caking ammonium nitrate recycling apparatus and method of use, 2016.
• [16] Patent No. 106316727 CN: Porous and granular ANFO (ammonium nitrate fuel oil) and preparation method thereof, 2017.
• [17] Patent No. 2599170, RU: Method of producing porous granulated ammonium nitrate, 2016.
• [18] Patent No. 2600061, RU: Method of porous granulated ammonium nitrate producing and device for its implementation, 2016.
• [19] Patent No. 112294 UA: Device for granulation in the suspended layer, 2016.
• [20] Patent No. 112393 UA: Vortex granulator with utilization of waste gases, 2016.
• [21] Patent No. 112394 UA: Vortex granulator, 2016.
• [22] Patent No. 112622 UA: Vortex granulator, 2016.
• [23] Patent No. 113141 UA: Vortex granulator, 2017.
• [24] G. Martin and W. Barbour, Industrial nitrogen compounds and explosives, Chemical Manufacture and Analysis, Watchmaker Publishing, Seaside, 2003.
• [25] N. Kubota, Propellants and explosives: thermochemical aspects of combustion. 3rd ed., Wiley-VCH Verlag & Co.,Weinheim, 2015.
• [26] D. Buczkowski and B. Zygmunt, “Detonation Properties of Mixtures of Ammonium Nitrate Based Fertilizers and Fuels”, Cent. Eur. J. Energetic Mater., vol. 8, no. 2, pp. 99–106, 2011.
• [27] A.E. Artyukhov and V.I. Sklabinskyi, “Experimental and industrial implementation of porous ammonium nitrate producing process in vortex granulators”, Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 6, pp. 42–48, 2013.
• [28] A.E. Artyukhov and N.A. Artyukhova, “Utilization of dust and ammonia from exhaust gases: new solutions for dryers with different types of fluidized bed”, J. Environ. Health Sci. Eng., vol. 16, no. 2, pp. 193–204, 2018.
• [29] A.E. Artyukhov and V.I. Sklabinskyi, “Investigation of the temperature field of coolant in the installations for obtaining 3D nanostructured porous surface layer on the granules of ammonium nitrate”, J. Nano- and Electron. Phys., vol. 9, no. 1, pp. 01015-1–01015-4, 2017.
• [30] N.A. Artyukhova, “Multistage finish drying of the N4HNO3 porous granules as a factor for nanoporous structure quality improvement”, J. Nano- and Electron. Phys., vol. 10, no. 3, pp. 03030-1–03030-5, 2018.
• [31] J. Hahm and A. Beskok, “Numerical simulation of multiple species detection using hydrodynamic/electrokinetic focusing”, Bull. Pol. Acad. Sci. Tech. Sci., vol. 53, no. 4, pp. 325–334, 2005.
• [32] А.E. Artyukhov, V.K. Obodiak, P.G. Boiko, and P.C. Rossi, Computer modeling of hydrodynamic and heat-mass transfer processes in the vortex type granulation devices, in CEUR Workshop Proceedings, vol. 1844, pp. 33–47, 2017.
• [33] A.E. Artyukhov, N.O. Artyukhova, and A.V. Ivaniia, “Creation of software for constructive calculation of devices with active hydrodynamics”, in Proceedings of the 14th International Conference on Advanced Trends in Radioelectronics, Telecommunications and Computer Engineering (TCSET 2018), 2018, pp. 139–142.
• [34] A.E. Artyukhov, N.A. Artyukhova, A.V. Ivaniia, and J. Gabrusenoks, “Multilayer modified NH4NO3 granules with 3D nanoporous structure: effect of the heat treatment regime on the structure of macro- and mezopores”, in Proc IEEE International Young Scientists Forum on Applied Physics and Engineering (YSF-2017), 2017, pp. 315–318.
• [35] A.E. Artyukhov and J. Gabrusenoks, “Phase composition and nanoporous structure of core and surface in the modified granules of NH4NO3”, Springer Proc. Phys., vol. 210, pp. 301–309, 2018.
• [36] N.O. Artyukhova and J. Krmela, “Nanoporous structure of the ammonium nitrate granules at the final drying: The effect of the dryer operation mode”, J. Nano- Electron. Phys., vol. 11, no. 4, pp. 04006-1–04006-4, 2019.
• [37] V.K. Obodiak, N.O. Artyukhova, and A.E. Artyukhov, “Calculation of the residence time of dispersed phase in sectioned devices: Theoretical basics and software implementation” Lect. Notes Mech. Eng., pp. 813‒820, 2020.
• [38] B. Paprocki, A. Pregowska, and J. Szczepanski, “Optimizing information processing in brain-inspired neural networks”, Bull. Pol. Acad. Sci. Tech. Sci., vol. 68, no. 2, pp. 225–233, 2020, doi: 10.24425/bpasts.2020.131844.
• [39] W. Jefimowski A. Nikitenko Z. Drążek, and M. Wieczorek, “Stationary supercapacitor energy storage operation algorithm based on neural network learning system”, Bull. Pol. Acad. Sci. Tech. Sci., vol. 68, no. 4, pp. 733–738, 2020, doi: 10.24425/bpasts.2020.134176.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).