Analysis of force in MR fluids during oscillatory compression squeeze

• Autorzy: Horak W. , Szczęch M. , Sapiński B.

Identyfikatory

DOI

10.1515/ama-2017-0010

• Języki publikacji: EN

Abstrakty

EN

This study investigates the behaviour of MR fluids in the oscillatory compression squeeze mode. Experiments were performed on commercially available MR fluids in the purpose-built experimental set-up. The influence of MR fluid’s properties and magnetic flux density on the force generated during the squeeze mode was investigated.

Słowa kluczowe

EN

MR Fluid; oscillatory squeeze mode; force; experiment

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2017
• Tom: Vol. 11, no. 1
• Strony: 64--68
• Opis fizyczny: Bibliogr. 22 poz., rys., tab., wykr.

Twórcy

autor

Horak W.

• AGH University of Science and Technology Faculty of Mechanical Engineering and Robotics, Department Department of Machine Design and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Szczęch M.

• AGH University of Science and Technology Faculty of Mechanical Engineering and Robotics, Department Department of Machine Design and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland

autor

Sapiński B.

• AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, Department of Process Control, al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• 1. Chaoyang G., Xinglong G., Shouhu X., Lijun Q., Qifan Y. (2013), Compression behaviors of magnetorheological fluids under nonuniform magnetic field, Rheologica Acta, 52(2), 165–176.
• 2. Chen, Peng and Bai, Xian-Xu and Qian, Li-Jun (2016), Magnetorheological fluid behavior in high-frequency oscillatory squeeze mode: Experimental tests and modelling, Journal of Applied Physics, 119, 105101.
• 3. Farjoud A., Cavey R., Ahmadian M., Craft M. (2009) Magnetorheological fluid behaviour in squeeze mode, Smart Materials and Structures, 18, 095001.
• 4. Farjoud A., Craft M., Burke W., Ahmadian M. (2011), Experimental investigation of MR squeeze mounts, Journal of Intelligent Material Systems and Structures, 22, 1645–1652.
• 5. Farjoud A., Vahdati N., Fah Y. (2008), MR-fluid yield surface determination in disc-type MR rotary brakes, Smart Materials and Structures, 17(3), 1-8.
• 6. Gołdasz J., Sapiński B. (2015), Insight into Magnetorheological Shock Absorbers, Springer International Publishing, Switzerland.
• 7. Horak W. (2013), Theoretical and experimental analysis of magnetorheological fluid squeeze flow, PhD Thesis (in Polish), AGH University of science and Technology, Krakow.
• 8. Kim J. H. (2014), Damping force control filled with magnetorheological fluids and engine mount having the same, US Patent, No. US 8,672,105 B2.
• 9. Kuzhir P., Lopez-Lopez M. T., Vertelov G., Pradille Ch., Bossis G. (2008), Oscillatory squeeze flow of suspensions of magnetic polymerized chains, Journal of Physics: Condensed Matter, 20(1), 1-5.
• 10. López-López M.T, Kuzhir P., et al. (2011), Normal stresses in a shear flow of magnetorheological suspensions: viscoelastic versus Maxwell stresses, Journal of Rheology, 54, 1119.
• 11. Mazlan S. A., Ekreem, N.B., Olabi A.G., (2007) The performance of magnetorheological fluid in squeeze mode, Smart Mater. Struct.,16 1678–1682.
• 12. Odenbach S., Pop L. M., Zubarev A. Yu. (2007), Rheological properties of magnetic fluids and their microstructural background, GAMM-Mitteilungen, 30(1), 195-204.
• 13. Salwiński J., Horak W. (2012), Measurement of Normal Force in Magnetorheological and Ferrofluid Lubricated Bearings, Key Engineering Materials, 490, 25-32.
• 14. Salwiński J., Horak W., Szczęch M. (2014), Experimental apparatus for examination of magnetic fluid lubricated thrust bearing, Scientific Papers of Silesian University of Technology, 83, 243-249.
• 15. Sapiński B., Horak W. Sioma A. (2014), Experiments of MR fluid behaviour in the squeeze mode using the vision method, Control Conference (ICCC), 15th International Carpathian, Velke Karlovice, 513–516.
• 16. Sapiński B., Horak W. Szczęch M. (2013), Investigation of MR fluids in the oscillatory squeeze mode, Acta Mechanica et Automatica, 7(2), 111-116.
• 17. Sapiński B., Szczęch M. (2013), CFD model of a magnetorheological fluid in squeeze mode, Acta Mechanica et Automatica, 7(3), 180-183.
• 18. Tao R. (2001), Super-strong magnetorheological fluids, Journal of Physics: Condensed Matter, 13(50), 979–999.
• 19. Wang, D.H., Liao, W.H. (2011), Magnetorheological fluid dampers: a review of parametric modelling, Smart Mater. Struct., 20, 023001.
• 20. Zubieta M., Eceolaza S., Elejabarrieta M.J., Bou-Ali M. M. (2009) Magnetorheological fluids: characterization and modeling of magnetization, Smart Mater. Struct., 18, 095019.
• 21. BASF The Chemical Company, http://www.basonetic.com/.
• 22. LORD Corporation, http://www.lord.com/.

Uwagi

1. Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)

2. Acknowledgement: This work is supported by AGH University of Science and Technology under research program No. 11.11.130.958.