A Study of Cutter Path in High Speed Rough Milling of Pockets. Part I: Modelling and Performance Evaluation

• Autorzy: Giuliani M. , Monno M. , Pittala G. M.
• Języki publikacji: EN

Abstrakty

EN

Considering large aeronautical parts, such as wing ribs, a volume up to 90-95% of the initial weight is removed. Prticularly pocket milling takes 60-70% of the total cycle time, so this operation plays an important role in the cost definition of the final product. Since typical materials in aircraft frames are aluminium alloys. High Speed Machining technology is convenient and more frequence used, also for rough operation. Using modern production systems cutting velocity and feedrate are relatively high also in rough machining. Main features of linear trajectory and cubic spline trajectory have been numerically evaluated in part I of this paper. In the second part tool paths have been experimental tested in terms of machining time considering high speed rough machining of pockets; a comparison between linear interppolation and cubic spline has been performed using CNC systems and an open architecture revolute robot.

Słowa kluczowe

EN

high speed rough milling; pockets; spline interpolation; experimental evaluation

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2007
• Tom: Vol. 7, No. 2
• Strony: 16--26
• Opis fizyczny: Bibliogr. 7 poz., rys., tab.

Twórcy

autor

Giuliani M.

• Laboratorio MUSP, Le Mose Strada Statale 10, 29100, Piacenza, Italy

autor

Monno M.

• Dipartimento di Meccanica, Politecnico di Milano, Via Bonardi 9, 20133, Milan, Italy

autor

Pittala G. M.

• Dipartimento di Meccanica, Politecnico di Milano, Via Bonardi 9, 20133, Milan, Italy

Bibliografia

• [1] ALTINTAS Y., NEWELL N., ITO M., Hierarchical open architecture multi processor CNC system for motion and process control, ASME Prod. Eng. Div. Publ. PED. Manufacturing Science and Engineering. 1993, Vol. 64, pp. 195-205.
• [2] ERKORKMAZ K., ALTINTAS Y., High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation. International Journal of Machine Tools and Manufacturing, 2001, Vol. 41, pp 1323- 1345.
• [3] ERK.ORKMAZ K.., ALTINTAS Y., High speed CNC system design. Part /II: high speed tracking and contouring control of feed drives. International Journal of Machine Tools and Manufacturing, 2001, Vol. 41, pp. 1637-1658.
• [4] NATIONAL INSTRUMENTS, NI-Motion User Manual. 07/2006.
• [5] ROBER S.J., SHIN Y.C., Modeling and control of CNC machines using a PC-based open architecture controller, Mechatronics, 1995, Vol. 5, No. 4, pp. 401-420.
• [6] SIEMENS SINUMERIK 840D si/ 840 Di sl/840D/840Di/810D, Job planning Programming manual, 03/2006 Edition.
• [7] WANG F.-C., WRIGHT P.K., Open architecture controllers for machine tools. Part2: a real time quintic spline interpolator. Journal of Manufacturing Science and Engineering, 1998, Vol. 120, No. 2, pp. 425-432.