Multi-Independent Optimization while Turning of Inconel-600 alloy using Grey Interactive Exploration

• Autorzy: Sonawane Sachin , Wangikar Sandeep , Pukale Kuldip

Identyfikatory

DOI

10.30657/pea.2021.27.37

• Języki publikacji: EN

Abstrakty

EN

This investigation effort offers multi-quality attributes optimization while turning of Inconel-600 superalloy. Taguchi's L9 orthogonal planning is implemented to review the upshot of governing aspects such as machining speed, feed rate, and depth of cut on vibrations and surface roughness (SR). To heighten all the three leading variables, the grey interactive exploration (GIE) is implemented. The grey interactive rating (GIR) is practiced as a multi-quality exclusive key (MQEK). The finest formation of central variables acquired from the investigational grades is cutting speed 500 m/min, feed rate 0.22 mm/rev and depth of cut 0.5 mm. ANOVA scrutiny signposts that feed rate is a crucial variable relating to the superiority yields. Products of endorsement pilots display that the ideal foremost variables developed the grey interactive rating from 0.6932 to 0.8138 for the numerous retorts. Scanning Electron Microscopic (SEM) scrutiny of cutting tool spectacles that fracture, chipping, abrasion and adhesion are the primary wear phenomena.

Słowa kluczowe

EN

Taguchi method; grey interactive rating; ANOVA; wear sensation

PL

metoda Taguchi; szara ocena interaktywna; ANOVA; uczucie noszenia

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2021
• Tom: Vol. 27, Iss. 4
• Strony: 277--282
• Opis fizyczny: Bibliogr. 16 poz., rys., tab.

Twórcy

autor

Sonawane Sachin

• SVERI’s College of Engineering, Pandharpur-4133304, Maharashtra, India

autor

Wangikar Sandeep

• SVERI’s College of Engineering, Pandharpur-4133304, Maharashtra, India

autor

Pukale Kuldip

• SVERI’s College of Engineering, Pandharpur-4133304, Maharashtra, India

Bibliografia

• 1. Abidi, Y., 2020. Relationship between surface roughness and chip morphology when turning hardened steel. Production Engineering Archives, 26(3), 92–98.
• 2. Abidi, Y., 2021. Analysis of the compromose between cutting tool life, productivity and roughness during turning of C45 hardened steel. Production Engineering Archives, 27(1), 30–35.
• 3. Camposeco-Negrete, C., de Dios Calderon Najera, J., Miranda-Valenzuela, J. C., 2016. Optimization of cutting parameters to minimize energy consumption during turning of AISI 1018 steel at constant material removal rate using robust design, International Journal of Advanced Manufacturing Technology. 83, 1341–1347.
• 4. Chandrasekaran, K., Marimuthu, P., Raja, K., 2013. Prediction model for CNC turning on AISI316 with single and multi-layered cutting tool using box behnken design. International Journal of Engineering, Transactions A: Basics, 26(4), 401–410.
• 5. Deshpande, Y.V., Andhare, A.B., Padole, P.M., 2018. Application of ANN to estimate surface roughness using cutting parameters, force, sound and vibration in turning of Inconel 718. SN Applied Sciences, 1, 104–112.
• 6. Eskandri, B., Davoodi, B., Ghorbani, H., 2018. Multi-objective optimization of parameters in turning of N-155 iron-nickel base super alloy using gray realtional analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 233–245.
• 7. Ezugwu, E.O., Wang, Z.M., Machado, A.R., 1999. The machinability of nickel-based alloys: a review. Journal of Materials Processing Technology, 86, 1–16.
• 8. Gunay, M., Korkmaz, M.E., Yasar, N., 2020. Performance analysis of coated carbide tool in turning of Nimonic 80A superalloy under different cuttting environments. Journal of Manufacturing Processes, 56,678–687.
• 9. Kacal, A., 2020. Effect of machining parameters on turning of Inconel X750 using PVD coated carbide inserts. Journal of Scientific and Industrial Research, 79, 226–231.
• 10. Khanna, N., Agrawal, C., Dogra, M., Pruncu, C.I., 2020. Evaluation of tool wear, energy consumption, and surface roughness during turning of Inconel 718 using sustainable machining technique. Journal of Materials Research Technology, 9, 5794–5804.
• 11. Krynke, M., 2021. Management Optimizing the Costs and Duration Time of the Process in the Production System. Production Engineering Archives, 27(3), 163–170, DOI: 10.30657/pea.2021.27.21
• 12. Mou, W., Zhu, S., 2020. Vibration, tool wear and surface roughness characteristic in turning of Inconel 718 alloy with ceramic insert under LN2 machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 369–380.
• 13. Parida, A. K., Maity, K., 2019. FEM analysis and experimental investigation of force and chip formation in hot turning of Inconel 625. Defence Technology, 15, 852–860.
• 14. Sonawane, S.A., Ronge, B.P., Pawar, P.M., 2019. Multi-characteristic optimization of WEDM for Ti-6Al-4V by applying grey relational investigation during profile machining. Journal of Mechanical Engineering and Sciences, 13, 6059–6087.
• 15. You, S.H., Lee, J.H., Oh, S.H., 2019. A study on cutting characteristics in turning operations of Titanium alloy used in automobile. International Journal of Precision Engineering and Manufacturing, 20, 209–216.
• 16. Yousefi, S., Zohoor, M., 2019. Effect of cutting parameters on the dimensional accuracy and surface finish in the hard turning of MDN250 steel with cubic boron nitride tool, for developing knoledged base expert system. International Journal of Mechanical and Materials Engineering, 14, 1–13.