Surface microhardening studies on steels after high feed milling

• Autorzy: Petrů Jana , Zlámal Tomáš , Špalek František , Čep Robert

Identyfikatory

DOI

10.12913/22998624/91888

• Języki publikacji: EN

Abstrakty

EN

The paper deals with the impact of high-speed machining production methods on the integrity of component surfaces. One has to point out that cutting conditions during machining have a significant impact on the final properties of surface and subsurface layers of the workpiece. The conclusion summarizes and analyzes the achieved results of experimental activities on stainless austenitic steel 1.4301, hardened tool steel 1.2343 and high-speed steel 1. 3344 (ASP 2023). The results of the work experimental parts demonstrate the influence of cutting parameters on selected surface integrity ones, specifically strengthening the surface and subsurface layers. The performed experiments show that microhardness of a surface layer of the machined material can be influenced by suitable cutting conditions and other cutting process parameters.

Słowa kluczowe

EN

surface integrity; microhardness; high speed machining

PL

integralność powierzchni; mikrotwardość; obróbka z dużą prędkością

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2018
• Tom: Vol. 12, no 2
• Strony: 222--230
• Opis fizyczny: Bibliogr. 18 poz., fig., tab.

Twórcy

autor

Petrů Jana

• VSB-Technical University of Ostrava, Faculty of Mechanical Engineering, 17. listopadu 2172/15, 708 00, Ostrava Poruba, Czech Republic

autor

Zlámal Tomáš

• VSB-Technical University of Ostrava, Faculty of Mechanical Engineering, 17. listopadu 2172/15, 708 00, Ostrava Poruba, Czech Republic

autor

Špalek František

• VSB-Technical University of Ostrava, Faculty of Mechanical Engineering, 17. listopadu 2172/15, 708 00, Ostrava Poruba, Czech Republic

autor

Čep Robert

• VSB-Technical University of Ostrava, Faculty of Mechanical Engineering, 17. listopadu 2172/15, 708 00, Ostrava Poruba, Czech Republic

Bibliografia

• 1. Miller, T. Six points you must know about High- Feed Milling [online]. MMT MoldMaking technology. Available on WWW: <http://www. moldmakingtechnology.com/articles/six-points-you-must-know-about-high-feed-milling->.
• 2. Schulz, H. Scientific Fundamentals of HSC. Munchen. C. Hanser V., 2001.
• 3. Kahles, J. S.; Field, M. New Quality Control Requirements for Integrity Surface. In ASM Materials Engi-neering Congress, 1972. Available on WWW: <http:// www.shotpeener.com/library/pdf/1972009.pdf>.
• 4. Field, M.; Kahles, F. Review of Surface Integrity of Machined Components, CIRP 2/1971, 153-163.
• 5. Stephenson, D. A.; Agapiou, J. S. Metal Cutting Teory and Practice. New York, Marcel Dekker, Inc., 1996, pp. 905.
• 6. Kovář, J. Ovlivnění kvality a jakosti obrobené plochy při frézování. In MM průmyslové spektrum. Praha, MM Publishing, s.r.o., 2004, 4, pp. 30.
• 7. Kříž, A. Integrita povrchu [online]. Available on WWW: <http://integrita.zcu.cz/download/skola2/ plzen_prez1.pdf>.
• 8. Bátora, B.; Vasilko, V. Obrobené povrchy – technologická dedičnosť, funkčnosť. Trenčín : Slovak Republic: Trenčínská Univerzita v Trenčíne v spolupráci s vydavateľstvom GC Tech, 2000.
• 9. Davis, J. R. Surfaces Hardening of Steels: Understanding the Basics. Materials Park, OH: ASM In-ternational, 2002, pp. 346.
• 10. Davim, J. P. Surface integrity in machining. New York: Springer, 2010.
• 11. Whitehouse, D. J. Surface metrology. Measurement Science & Technology, 1996, 955-972.
• 12. Vaněček, D. Experimentální výzkum vlivu vysokých řezných rychlostí na obráběcí proces se zaměřením na drsnost povrchu a zpevnění obrobené plochy při frézování. Disertation thesis. ČVUT in Prague, 2005.
• 13. Dolinšek, S.; Suštaršič, B.; Kopač, J. Wear mechanisms of cutting tools in high-speed cutting processes [online]. In Wear 250. Elsevier, 2001. p. 349-356. Available on WWW: <http://www.ewp. rpi.edu/hartford/~ernesto/F2012/FWM/Papers/ Dolinsek2001-Wear-HSCutting.pdf>.
• 14. Neslušan, M.; Turek, S.; Brychta, J.; Čep, R.; Tabaček, M. Experimentálne metódy v trieskovom obrábaní. Žilina : Slovak Republic : EDIS Žilina, 2007, pp. 343.
• 15. Plánička, F. Efektivní frézování nerezových oceli [online]. In MM Průmyslové spektrum. Praha : MM publishing, s.r.o. Available on WWW:<http:// www.mmspektrum.com/ clanek/efektivni-frezovani-nerezovych-oceli.html>.
• 16. ČSN EN ISO 6507-1, ČSN EN ISO 6507:2005 Metallic materials - Vickers hardness test - Part 1: Test method.
• 17. Wang, F.; Zhao, J.; Li, A.; Zhang, X. Effects of cutting conditions on microhardness and microstructure in high-speed milling of H13 tool steel International Journal of Advanced Manufacturing Technology. 2014. Vol. 73, 137-146, doi: 10.1007/ s00170-014-5812-9.
• 18. Li, W.; Guo, Y.; Guo, C. Superior surface integrity by sustainable dry hard milling and impact on fatigue [online]. CIRP Annals-Manufacturing Technology. 2013, Vol. 62, 567–570, doi: 10.1016/j. cirp.2013.03.024.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).