Advances in Powder Metallurgy Soft Magnetic Composite Materials

• Autorzy: Bureš R. , Strečková M. , Fáberová M. , Kollár P. , Füzer J.

Identyfikatory

DOI

10.1515/amm-2017-0168

• Języki publikacji: EN

Abstrakty

EN

Powder metallurgy has grown with the expansion of various industry. Automotive industry had the most strong influence. Today, more than 90% of PM products are used in the transportation industry. Development of new materials such as magnetic materials is expected to meet the new trends of automotive industry, electric and hybrid vehicles. Soft magnetic composites (SMC) are PM materials based on ferromagnetic powder particles covered by electric insulation layer. Concept of SMC’s and PM technologies offer possibility to become faster, use higher frequencies, become smaller and denser, save more energy, achieving high permeability and lower core loss in high frequency region, which is required for soft magnetic materials. Investigation of correlations among compaction parameters, inner structure, magnetic and mechanical properties are presented.

Słowa kluczowe

EN

resin bonded SMC; soft magnetic ferrites; compaction; microwave sintering; magnetic and mechanical properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 2B
• Strony: 1149--1154
• Opis fizyczny: Bibliogr. 11 poz., rys., tab.

Twórcy

autor

Bureš R.

• Institute of Materials Research of Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovak Republic

autor

Strečková M.

• Institute of Materials Research of Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovak Republic

autor

Fáberová M.

• Institute of Materials Research of Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovak Republic

autor

Kollár P.

• Faculty of Science, Pavol Jozef Šafárik University in Košice, Košice, Slovak Republic

autor

Füzer J.

• Faculty of Science, Pavol Jozef Šafárik University in Košice, Košice, Slovak Republic

Bibliografia

• [1] http://www.gkn.com/hoeganaes/Pages/default.aspx
• [2] L. Svensson et al., JMMM 324, 2717 (2012).
• [3] T. Ueno et al., Sei. Tech. Rev. 82, 9 (2016).
• [4] S. Wu et al., JMMM 324, 3899 (2012).
• [5] Y. Pittini-Yamada et. al., Acta Mater. 59, 4291 (2011).
• [6] P. Kollár et al., JMMM 388, 76 (2015).
• [7] P. Kollár et al., JMMM 353, 65 (2014).
• [8] M. Strečková et al., Mater. Lett. 101, 37 (2013).
• [9] M. Strečková et al., Advances Mater. Sci. Engineering 2015, (2015).
• [10] H. Shokrollahi, K. Janghorban, Mat. Sci. Eng. B. 134, 41 (2006).
• [11] R. Bureš, et al., Patent proposal No. PP 0009572013. ÚPV SR, (2013).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)