Influence of the repetitive corrugation on the mechanism occuring during plastic Deformation of CuSn6 alloy

• Autorzy: Nuckowski P. M. , Kwaśny W. , Rdzawski Z. , Głuchowski W. , Pawlyta M.

Identyfikatory

DOI

10.1515/amm-2016-0208

• Języki publikacji: EN

Abstrakty

EN

Influence of the repetitive corrugation on the mechanism occuring during plastic Deformation of CuSn6 alloy This paper presents the research results of Cu$n6 alloy strip at semi-hard state, plastically deformed in the process of repetitive corrugation. The influence of process parameters on the mechanical properties and structure of examined alloy were investigated. Examination in high-resolution transmission electron microscopy (HRTEM) confirmed the impact of the repetitive corrugation to obtain the nano-scale structures. It has been found, that the application of repetitive corrugation increases the tensile strength (Rm). yield strength (Rpo:) and elastic limit (Rpo.os) of CuSn6 alloy strips. In the present work it has been confirmed that the repetitive corrugation process is a more efficient method for structure and mechanical properties modification of commercial CuSn6 alloy strip (serni-hard) as compared with the classic rolling process.

Słowa kluczowe

EN

CuSn6 alloy; severe plastic deformation; repetitive corrugation; structure analysis; high-resolution transmission electron microscopy

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 3
• Strony: 1261--1264
• Opis fizyczny: Bibliogr. 10 poz., rys., tab.

Twórcy

autor

Nuckowski P. M.

• Silesian University of Technology, Institute of Engineering Materials and Biomateriałs, Faculty of Mechanical Engineering, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Kwaśny W.

• Silesian University of Technology, Institute of Engineering Materials and Biomateriałs, Faculty of Mechanical Engineering, 18A Konarskiego Str., 44-100 Gliwice, Poland

autor

Rdzawski Z.

• Non-Ferrus Metals Destitute, 5 Sowińskiego Str., 44-100 Gliwice, Poland

autor

Głuchowski W.

• Non-Ferrus Metals Destitute, 5 Sowińskiego Str., 44-100 Gliwice, Poland

autor

Pawlyta M.

• Silesian University of Technology, Institute of Engineering Materials and Biomateriałs, Faculty of Mechanical Engineering, 18A Konarskiego Str., 44-100 Gliwice, Poland

Bibliografia

• [1] V. Rajinikanth, Gaurav Arora, N. Narasaiah, K. Venkateswarlu, Mater Lett. 62, 301-304 (2008).
• [2] J. Huang, Y. Zhu, H. Jiang, T. C. Lowe, Acta Mater. 49, 1497-1505 (2001).
• [3] T. Tański. P. Snopiński. P. Nuckowski, T. Jung, W. Kwaśny, T. Linek, JAMME 63/1, 5-12 (2014).
• [4] A. Mishra, V. Richard, F. Gregori, R.J. Asaro, MA. Meyers, Mater. Sei. Eng.. A. 410-411. 290-298 (2005).
• [5] A. Mishra, B.K. Kad, F. Gregori, MA. Meyers, Acta Mater. 55, 13-28 (2007).
• [6] W. Kwaśny, P. Nuckowski, Z. Rdzawski, W. Głuchowski, Arch Mater Sei Eng. 62, 60-66 (2013).
• [7] M. Liu, T. Jiang, X. Xie, Q Liu, X. Li, H.J. Roven. Trans. Nonferrous Met. Soc. China. 24, 3848-3857 (2014).
• [8] Y. Ito, Z. Horita, Mater. Sei. Eng.. A. 503, 32-36, (2009).
• [9] J. Gubicza, N.Q. Chinh. T. Csanadi, T.G. Lanedou. T. Ungar, Mater. Sei. Eng., A. 462. 86-90 (2007).
• [10] P. Nuckowski, Wpływ warunków naprzemiennego gięcia na strukturę i własności stopu CuSn6. PhD thesis, Silesian University of Technology, Gliwice, 2015.

Uwagi

EN

This publication was financed by the Ministry of Science and Higher Education of Poland as the statutory financial grant of the Faculty of Mechanical Engineering SUT