Synthesis and Characterization of Al-Zn-Mg alloy / Zircon Sand Reinforced Composites

• Autorzy: Satish Kumar T. , Shalini S. , Krishna Kumar K.

Identyfikatory

DOI

10.24425/122395

• Języki publikacji: EN

Abstrakty

EN

Aluminium based metal matrix composite (Al-MMC’s) are much popular in the field like automobile and aerospace industries, because of its ease of fabrication process and excellent mechanical properties. In this study, Al-Zn-Mg alloy composite reinforced with 3, 6 and 9 v % of zircon sand was synthesised by stir casting technique. The microstructure of the composites revealed uniform distribution of reinforced particles. Hardness, tensile strength and wear resistance of Al-Zn-Mg alloy/zircon sand composite were found to increase with increase in v % percentage of zircon sand. Scanning Electron Microscope analysis of wear tested sample surface of composites revealed no evidence of plastic deformation of matrix phase. Particle pulls out and abrasive wear was the common feature observed from all the composites.

Słowa kluczowe

EN

Al-Zn-Mg alloy; microstructure; hardness; tensile strength; wear

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 2
• Strony: 689--695
• Opis fizyczny: Bibliogr. 32 poz., rys., tab., wzory

Twórcy

autor

Satish Kumar T.

• PSG College of Technology, Department of Metallurgical Engineering, Coimbatore-641004, Tamilnadu, India

autor

Shalini S.

• PSC College of Technology, Department of Physics, Coimbatore-641 004, Tamilnadu, India

autor

Krishna Kumar K.

• PSG College of Technology, Department of Metallurgical Engineering, Coimbatore-641004, Tamilnadu, India

Bibliografia

• [1] A. Kumar, M. Kumar, R. Goyal, IJIRST - International J. for Innovative Res. in Science & Technol. 2, 436-439 (2016).
• [2] T. Satish Kumar, R. Subramanian, S. Shalini, J. Mater. Res. Technol. 4, 333-347 (2015).
• [3] T. Satish Kumar, R. Subramanian, S. Shalini, P. C. Angelo, J. Scientific and Ind. Res. 75, 89-94 (2016).
• [4] A. Banerji, M. K. Surappa, P. K. Rohatgi, Metall. Trans. B. 14B, 273-283 (1983).
• [5] S. Das, V. Udhayabanu, S. Das, K. Das, J. Mater. Sci. 41, 4668-4677 (2006).
• [6] E. G. Okafor, V. S. Aigbodion, Tribol. Ind. 32, 31-37 (2010).
• [7] J. U. Ejiofor, B. A. Okorie, R. G. Reddy, J. Mater. Eng. Perform. 6, 326-334 (1997).
• [8] H. Abdizadeh, M. Ashuri, P. T. Moghadam, A. Nouribahadory, H. R. Baharvandi, Mater. Des. 32, 4417-4423 (1997).
• [9] Y. Chen, D. D. L. Chung, J. Mater. Sci. 29, 6069-6075 (1994).
• [10] K. P. Kaur, O. P. Pandey, J. Alloys Compd. 503, 410-414 (2010).
• [11] T. Weibgarber, B. E. Kieback, J. Metastab. Nanocryst. Mater. 8, 275-283 (2000).
• [12] V. Ramakoteswara Rao, N. Ramanaiah, M. M. Mohiuddin Sarcar, J. Mater. Res. Technol. 5, 377-383 (2016).
• [13] S. Kumar, V. Balasubramanian, Wear 264, 1026-1034 (2008).
• [14] T. Satish Kumar, R. Subramanian, S. Shalini, P. C. Angelo, Forschung im Ingenieurwes. 79, 123-130 (2015).
• [15] J. M. Gomez de Salazar, M. I. Barrena, Scripta Mater. 44, 2489-2495 (2001).
• [16] T. G. Nieh, R. F. Karlak, Scr. Mater. 18, 25-28 (1984).
• [17] J. M. Praveen, K. L. Vishnu Kumar, Procedia Eng. 97, 642-647 (2014).
• [18] Yan Liu, Daming Jiang, Wenlong Xie, Jie Hu, Boran Ma, Mater. Charact. 93, 173-183 (2014).
• [19] S. Saikawa, G. Aoshima, S. Ikeno, K. Morita, N. Sunayama, K. Komai, Arch. of Metall. and Mater. 60, 871-874 (2015).
• [20] S. Y. Park, W. J. Kim, J. Mater. Sci. Techno l. 32, 660-670 (2016).
• [21] Xinwei Li, Qizhou Cai, Bingyi Zhao, Yating Xiao, Bing Li, J. Alloys Compd. 675, 201-210 (2016).
• [22] V. S. Aigbodion, J. King. Saud. University-Eng. Sci. 26, 144-151 (2014).
• [23] A. N. Abdel-Azim, Y. Shash, S. F. Mostafa, A. Younan, J. Mater. Process. Technol. 55, 199-205 (1995).
• [24] M. K. Surappa, J. Mater. Process. Technol. 63, 325-333 (1997).
• [25] A. Banerji, M. K. Surappa, P. K. Rohatgi, Metall. Mater. Trans. B. 14B, 273-283 (1983).
• [26] D. Dunand, A. Mortensen, A. Mater. Sci. Eng. A. 135, 179-184 (1991).
• [27] S. Kumar, R. S. Panwar, O. P. Pandey, Ceram. Int. 39, 6333-6342 (2013).
• [28] B. K. C. Ganesh, W. Sha, N. Ramanaiah, A. Krishnaiah, Mater. Des. 56, 480-486 (2014).
• [29] M. Murali, M. Sambathkumar, M. S. Senthil Saravanan, Univ. J. Mater. Sci. 2, 49-53 (2014).
• [30] J. Oñoro, Ingeniería y Ciencia de los Materiales, ETSI, Industriales, Universidad Politécnica de Madrid, c/José Gutiérrez Abascal, 2, 28006 Madrid, Spain; 2011.
• [31] S. Das, S. Das, K. Das, Compos. Sci. Technol. 67, 746-751 (2007).
• [32] R. S. Panwar, S. Kumar, R. Pandey, O. P. Pandey, Tribol. Lett. (2014) DOI: 10.1007/s11249-014-0335-y.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).