Theoretical and experimental aspects of the bimetallic reinforcement bars steel - steel resistant to corrosion rolling process

• Autorzy: Sawicki S. , Dyja H. , Mróz S. , Szota P.
• Języki publikacji: EN

Abstrakty

EN

Purpose: Bimetallic bars which possess higher corrosion resistance and mechanical properties, it is the new kind of bimetallic bars, which are better than standard bars. The bimetallic bars are more often applied in concrete construction. Design/methodology/approach: The simulations of the bar rolling were carried out using the Forge2007® commercial program. Findings: The use of non-corrosive steel on plating layer assures receipt on a high durability and esthetics bimetallic bars. Practical implications: Bimetallic bars are chiefly used in the building industry at production of concrete constructions, and as working elements in bridge building in aggressive environment. Originality/value: Production of bimetallic bars is very difficult. One from many problems during production bimetallic bars is assurance good strength of bimetallic layer bond.

Słowa kluczowe

EN

numerical techniques; FEM; bimetallic bars; steel; steel resistant to corrosion; plastic working of metals; hot rolling; numerical modelling; reinforcement bar

PL

techniki numeryczne; MES; pręty bimetalowe; stal; stal odporna na korozję; obróbka plastyczna metali; walcowanie na gorąco; modelowanie numeryczne; pręt zbrojeniowy

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2010
• Tom: Vol. 43, nr 1
• Strony: 371--378
• Opis fizyczny: Bibliogr. 17 poz., rys., tab., wykr.

Twórcy

autor

Sawicki S.

• Faculty of Materials Processing Technology and Applied Physics, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Czestochowa, Poland

autor

Dyja H.

• Faculty of Materials Processing Technology and Applied Physics, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Czestochowa, Poland

autor

Mróz S.

• Faculty of Materials Processing Technology and Applied Physics, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Czestochowa, Poland

autor

Szota P.

• Faculty of Materials Processing Technology and Applied Physics, Czestochowa University of Technology, Al. Armii Krajowej 19, 42-200 Czestochowa, Poland

Bibliografia

• [1] S. Berski, Z. Stradomski, H. Dyja: Quality of bimetal Al-Cu joint after explosive cladding, Journal of Achievements in Materials and Manufacturing Engineering 22/1 (2007) 73-76.
• [2] H. Dyja, S. Mróz, D. Rydz: Technology and modelling the processes of rolling of bimetal articles, Publishing WIPMiFS, Series of Metallurgy 33, 2003.
• [3] H. Dyja, S. Mróz, D. Rydz, Czestochowa University of Technology Publishing WIPMiFS, Series of Metallurgy 33, Czestochowa, 2003.
• [4] H. Dyja, S. Mróz, A. Milenin, Journal of Materials Processing Technolog y153-154 (2004) 100-107.
• [5] FORGE3® Reference Guide Release 6.2, Sophia-Antipolis, 2002.
• [6] A. Henzel, T. Spittel: Rasciet energosilovykh parametrov v processakh obrobotki metallov davlenijem, Metalurgija, Moskva, 1982.
• [7] S. Mróz, Theoretical and experimental analysis of process of rolling bimetal bars, Dsc. thesis, Czestochowa University of Technology, 2002.
• [8] S. Mróz., K. Jagieáa., H. Dyja, Determination of the energy and power parameters during groove-rolling, Journal of Achievements in Materials and Manufacturing Engineering 22/2 (2007) 59-62.
• [9] S. Mróz, H. Dyja, A. Milenin, Numerical modeling and experimental verification of the process of rolling bimetallic rods, Hutnik - Metallurgical News 5 (2004) 204-208.
• [10] S.J. Pawlak, Austenite stability in the high strength metastable stainless steels, Journal of Achievements in Materials and Manufacturing Engineering 22/2 (2007) 91-94.
• [11] S. Sawicki, Theoretical and experimental aspects of the bimetallic reinforcement bars steel - steel resistant to corrosion rolling process, Dsc. thesis, Czestochowa University of Technology , 2009.
• [12] S. Sawicki, P. Szota, Numerical modeling of the process of bimetallic bar rolling in a three-high skew rolling mill, VIII International Scientific Conference entitled "New Technologies and Achievements in Metallurgy and Material Engineering 2007 Czestochowa”, Conference Materials, Faculty of Process & Material Engineering and Applied Physics. Series of Metallurgy 48 495-499. ISBN 978-83-7193-336-3.
• [13] P. Šimeček, D. Hajduk, Prediction of mechanical properties of hot rolled steel products, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 395-398.
• [14] I.H. Son, Y.G. Jin, Y.T. Im, Finite element investigations of friction condition in equal channel angular extrusion, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 285-288.
• [15] P. Szota, H. Dyja, Numerical modeling of the bimetallic reinforcement bar rolling process, Journal of Achievements in Materials and Manufacturing Engineering 25/1 2007 55-58.
• [16] PN-ISO 6935-2 - Steel for the reinforcement of concrete - Ribbed bars.
• [17] PN-ISO 6935-2/AK - Steel for the reinforcement of concrete - Ribbed bars - Additional requirements applicable in the country.